ページ1に含まれる内容の要旨
1025_A50-095300_Eng-cover 10/27/06 9:43 PM Page 1
LTV46DA
User's Manual
ページ2に含まれる内容の要旨
1025_A50-095300_Eng-cover 10/27/06 9:43 PM Page 2
ページ3に含まれる内容の要旨
1027_A50-095300_Eng 10/27/06 9:44 PM Page 1 Content Content ■ Conformity............................................................................................................................................... 3 Disposal ..................................................................................................................................................... 3 ■ Unpacking and Setup ................................................................................................
ページ4に含まれる内容の要旨
1027_A50-095300_Eng 10/27/06 9:44 PM Page 2 Content Reduce Noise ......................................................................................................................................... 23 Channel Groups ..................................................................................................................................... 23 Set Screen Language .......................................................................................................................
ページ5に含まれる内容の要旨
1027_A50-095300_Eng 10/27/06 9:44 PM Page 3 Conformity Conformity This product fulfills the EC guidelines 89/336/EEC (EMC guideline) with amendments 93/68 EEC and 92/31 EEC and the EC guideline 73/23/EEC (low voltage guideline) with amendments 93/68/EEC. Disposal This product is subject to the European guideline 2002/96/EC. All electric and electronic devices must be disposed of separately from household waste at publicly established facilities. Avoid hazard to the environment and dangers
ページ6に含まれる内容の要旨
1027_A50-095300_Eng 10/27/06 9:44 PM Page 4 Unpacking and Setup Unpacking and Setup Scope of Supply Please check, that the delivery is complete. 1 Unit 2 Remote control 3 Batteries 4 Mains cable Safety • Read the following instructions carefully. • Keep this manual at hand. • Closely follow the instructions given. • Proceed exactly as described in the instructions. • Do not use the unit near water. • Clean the unit with a dry cloth only. • Ensure that the ventilation openings are not c
ページ7に含まれる内容の要旨
1027_A50-095300_Eng 10/27/06 9:44 PM Page 5 Unpacking and Setup • Only use suitable stands, supports, carts or tables that ensure the unit does not tip over. If you place the unit on a cart, move it with caution to prevent injuries or damage resulting from tip-over. • Unplug the unit during lightning storms or if you will not use it for a longer period of time. • Refer all servicing to qualified service personnel only. Servicing is required if the unit has been damaged, e.g. if the power cab
ページ8に含まれる内容の要旨
1027_A50-095300_Eng 10/27/06 9:44 PM Page 6 Unpacking and Setup Location ➣ The Best Distance The distance when watching programs on a television of this size should be approximately 2.2 to 2.7 metres. If the distance is too large or too small, this may lead to strain of your eyes. This may impair your health. ➣ Background Light/Reflections When watching television at night, the television should not be the only source of light in the room. The big difference of brightness between the scree
ページ9に含まれる内容の要旨
1027_A50-095300_Eng 10/27/06 9:44 PM Page 7 Viewing the Control Panels Viewing the Control Panels Front View 1 Input source selection button 5 Power button 2 MENU selection button 6 Remote control sensor 3 Volume adjustment button 7 Power Indicator 4 Channel selection button 8 Speaker Rear View - 5.1 channel sound output for Home-theater system 1 AV S-VIDEO Input through the coaxial cable 2 AV AUDIO Input 14 Digital Audio Out (Optical) 3 AV VIDEO Input - 5.1 channel sound output for Home-the
ページ10に含まれる内容の要旨
1027_A50-095300_Eng 10/27/06 9:44 PM Page 8 Remote Control Remote Control 1 Power On/Off button 13 Temporary Sound Mute 2 Numeric buttons 14 TV Input Source Selection 1 13 3 One/Two-Digit Channel 15 External Source Input Selection Selection 4 Favorite Channel Selection 16 Picture Size Selection 5 Picture Still 17 Previous Channel 2 6 Sleep Timer 18 TV Information Display 7 Picture Mode Selection 19 Sound Selection : ( ) Mono/Stereo Dual Select 3 14 ( ) 8 Sound Mode Selection 15 (
ページ11に含まれる内容の要旨
1027_A50-095300_Eng 10/27/06 9:44 PM Page 9 Connections and Start of Operation Connections and Start of Operation Connections for TV Reception You can connect roof aerial, cable reception, a satellite receiver, set top boxes (DVB-T) or video recorders etc. to the unit. Connecting a Satellite Receiver, a Set Top Box or a Video Recorder ➣ Connecting to a Device with SCART Socket Use a SCART cable to connect the units. 1 Plug the SCART cable into the socket [SCART1] on the television set. 2 Plu
ページ12に含まれる内容の要旨
1027_A50-095300_Eng 10/27/06 9:44 PM Page 10 Connections and Start of Operation ➣ Connecting to a Device without SCART Socket Use a coaxial cable to connect the units. 1 Plug the coaxial cable into the socket [ANT] on the television set. 2 Plug the other end of the coaxial cable into the output socket on the receiver. Connecting to the Roof Aerial Ensure that the roof aerial is properly installed and grounded. If the roof aerial is not properly grounded, voltage may damage the unit and sta
ページ13に含まれる内容の要旨
1027_A50-095300_Eng 10/27/06 9:44 PM Page 11 Connections and Start of Operation Connecting to Cable Reception 1 Plug the coaxial cable of the cable reception into the socket [ANT]. Connecting to Headphones The output for the headphone is on the right rear side of the unit. If you connect a headset to the unit, the main speaker will be switched off. Connecting Camcorders and Video Games You can use the television set to connect camcorder and video games. Use either the cinch sockets or one of
ページ14に含まれる内容の要旨
1027_A50-095300_Eng 10/27/06 9:44 PM Page 12 Connections and Start of Operation ➣ Connecting Camcorders and Video Games by S-Video Cable 1 Connect the S-Video cable to the socket [S-VIDEO] and the output sockets of the external devices. 2 Plug the audio cable into the socket [AUDIO IN] on the television set and connect the cable to the output socket of the external device. ➣ Connecting Camcorders and Video Games by SCART Cable Use a SCART cable with a SCART plug on one end and AV plugs on
ページ15に含まれる内容の要旨
1027_A50-095300_Eng 10/27/06 9:44 PM Page 13 Connections and Start of Operation Connecting to a Computer You can use the television set as a monitor for the computer. This is possible parallel to television operation. Use a 15-pin D-Sub cable to connect the television set to the computer. 1 Plug the cable into the output socket of the graphic board. 2 Plug the other end of the cable into the socket [RGB]. 3 Connect the audio cable according to the colours to the socket [PC Sound] on the
ページ16に含まれる内容の要旨
1027_A50-095300_Eng 10/27/06 9:44 PM Page 14 Connections and Start of Operation Connecting the Digital Audio Output You can Connect optical digital audio cable to "DIGITAL AUDIO OUT" on the rear of the TV and the other end to "DIGITAL AUDIO IN" of the equipment with a digital output to enjoy digital sound (Multi-Channel Surround Sound, Stereo, Dolby Sound). 1 Connecting the OPTICAL Port Connect the OPTICAL port of the DIGITAL AUDIO OUT on the rear of the TV to the optical audio input of the
ページ17に含まれる内容の要旨
1027_A50-095300_Eng 10/27/06 9:44 PM Page 15 Connections and Start of Operation 1 Connecting HDMI/DVI Cable Connect the HDMI/DVI cable and audio cable from the output jacks on the DVD player or Set-top box to the [HDMI 1] or [HDMI 2] input jack and PC Audio input jacks on the TV. 2 Connecting HDMI Cable Connect the HDMI cable from the output jack on the DVD player or Set-top box to the [HDMI 1] or [HDMI 2] input jack on the TV. or Inserting the Batteries For the operation of the remote co
ページ18に含まれる内容の要旨
1027_A50-095300_Eng 10/27/06 9:44 PM Page 16 Settings Settings Switching On 1 Press the mains switch on the back of the unit. 2 Press the remote control. This switches the unit on and it can be operated using the remote control. If it is not explicitly stated otherwise, it will be assumed that the unit and the TV set are switched on and will be operated by the remote control. By default, the unit is set to the English language. For information on how to change the on-screen language lat
ページ19に含まれる内容の要旨
1027_A50-095300_Eng 10/27/06 9:44 PM Page 17 Settings Open, Select and Close Menus The settings of the unit are accessible via menus. To navigate in the menus proceed as follows: 1 Press . The main menu opens. The submenu selected last will be displayed. Picture Audio Timer Install Setup Option 2 If necessary, press to return to the Mode Standard Brightness 050 main menu. Contrast 050 3 Press or to select the desired menu. Sharpness 050 Or Colour 050 Tint 050 4 Press or to sel
ページ20に含まれる内容の要旨
1027_A50-095300_Eng 10/27/06 9:44 PM Page 18 Settings 1 Press . To return to the main menu, press several times. 2 Press or and select INSTALL. Picture Audio Timer Install Setup Option Auto Tuning Italy 3 Press or and select AUTO TUNING. Auto Tuning Programme 12 Austria 4 Press . Colour PAL Belgium System BG 5 Select the country where you want to operate Belgium-Dutch Croatia Manual Tuning S23 the unit. Czech Fine Tuning 217.25 Denmark 6 Press or to select the desired settin
