ページ1に含まれる内容の要旨
37" LCD TV
Televisor con pantalla LCD de 37"
DX-LCD37-09
USER GUIDE • GUÍA DEL USUARIO
ページ2に含まれる内容の要旨
2 Contents Dynex DX-LCD37-09 37" LCD TV Maintaining.................................................................................... 22 Contents Cleaning .................................................................................. 22 Important safety instructions ........................................................... 4 Servicing.................................................................................. 22 TV components ........................................................
ページ3に含まれる内容の要旨
Contents 3 f CHILD SAFETY It makes a difference how and where you use your flat panel display As you enjoy your new product, keep these safety tips in mind The issue The home theater entertainment experience is a growing trend, and larger TVs are popular purchases. However, TVs are not always supported on the proper stands or installed according to the manufacturer’s recommendations. We and the consumer electronics industry are committed to making home entertainment enjoyable and safe. TVs
ページ4に含まれる内容の要旨
4 Important safety instructions Grounding or polarization CAUTION Do not defeat the safety purpose of the polarized or grounding-type RISK OF ELECTRIC SHOCK plug. A polarized plug has two blades with one wider than the other. A DO NOT OPEN grounding type plug has two blades and a grounding prong. The wide blade or grounding prong are provided for your safety. If the plug does Warning: To reduce the risk of electric shock, do not remove the cover or not fit, contact an electrician to replace
ページ5に含まれる内容の要旨
Important safety instructions 5 Safety check Outdoor antenna grounding After completing any service or repair to this TV, ask the service If an outside antenna or cable system is connected to your TV, make sure technician to perform routine safety checks to determine that your TV is that the antenna or cable system is grounded to provide some in correct operating condition. protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No
ページ6に含まれる内容の要旨
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 6 TV components Back TV components Accessories • Remote control • AA batteries (2) •User guide Note: Cables are not supplied. You can purchase cables at most electronics stores. Front and side POWER INPUT CHANNEL #Jack Description 1 PC-IN Connect a computer with a VGA VOLUME cable to this jack. MENU 2 HDMI 2 IN Connect an HDMI device to this jack. 3 HDMI 1 IN Connect an HDMI or DVI device to this jack. To connect an DVI device, you need to connect an HDMI-DVI
ページ7に含まれる内容の要旨
1 11 12 2 13 14 3 4 15 5 6 16 7 8 1 2 6 17 9 10 3 7 4 8 5 TV components 7 Remote control MTS/SAP FREEZE MENU ZOOM DISPLAY PC-IN AUDIO RECALL COMPONENT 1 YR R AUDIO AUDIO AUDIO Pb L L S VIDEO VIDEO VIDEO Pr VIDEO 1 COMPONENT 2 S-VIDEO YR AUDIO Pb L # Button Description Pr 1 POWER Press to turn your TV on or off. 2 Numbers Press to enter a channel number. If you want to select a digital sub-channel, press — to select the #Jack Description sub-channel. 1 PC-IN AUDIO Connect the computer audio j
ページ8に含まれる内容の要旨
8 Setting up your TV Connecting an antenna or basic cable #Button Description To connect an antenna or basic cable (no cable box): 17 Press to go to the next or previous CH / CH • Connect one end of a 75 ohm coaxial cable to the antenna or channel in the channel list, or to basic cable wall jack, then connect the other end of the cable to select the external input mode. When the ANT. IN jack on the back of your TV. you press one of these buttons repeatedly, you cycle between: Antenna • Ana
ページ9に含まれる内容の要旨
Setting up your TV 9 Connecting an HDMI device Connecting a component video device You can connect two HDMI devices. You can connect two component video devices. To connect an HDMI device: To connect a component video device: • Connect one end of an HDMI cable to the HDMI OUT jack on the 1 Connect a component video cable to the COMPONENT VIDEO HDMI device, then connect the other end of the cable to the OUT (Y, Pb, and Pr) jacks on the component device, then connect HDMI 1 INPUT or HDMI 2 INPUT
ページ10に含まれる内容の要旨
10 Setting up your TV Connecting an S-Video device Connecting a camcorder, game, or VCR You can connect two S-Video devices. To connect a camcorder, game, or VCR: 1 Connect one end of a video cable to the VIDEO OUT jack on the To connect an S-Video device: camcorder, game, or VCR, then connect the other end to the 1 Connect one end of an S-Video cable to the S-VIDEO OUT jack on VIDEO1 or VIDEO2 jack on the back of your TV. the S-Video device, then connect the other end of the cable to the S-
ページ11に含まれる内容の要旨
Using your TV 11 Connecting an analog audio device Setting up for the first time To connect an analog audio device: The first time you turn on your TV, a quick setup program starts that lets • Connect one end of an audio cable to the AUDIO IN L and R jacks you select a language for the on-screen menu, select the TV signal on the audio device, then connect the other end of the cable to source, and scan for available channels. the AUDIO OUT jacks on the back of your TV. To set up your TV for t
ページ12に含まれる内容の要旨
12 Using your TV Opening the on-screen menu Scanning for channels To open the on-screen menu: The first time you turned on your TV, your TV scanned for channels. You 1 Press MENU. The on-screen menu opens. only need to re-scan for channels if: • You change the TV signal source. For example, you change from Air to Cable. • You move your TV to a different viewing area. • Additional channels have become available since the initial scan. • You want to restore DTV channels you have deleted. Your TV
ページ13に含まれる内容の要旨
Using your TV 13 Notes: Adding channels to the channel list If you connect cable TV without a cable box, you may need to contact your When your TV scans for channels, it looks for channels with good cable TV provider for help. signals. If a channel has a poor signal, your TV skips that channel. You If you press POWER or MENU during the scan, the scan will be canceled. can add a skipped channel to the channel list. For digital channels, if you unplug the power cord without turning off your TV
ページ14に含まれる内容の要旨
14 Using your TV 2 Press or to select LANGUAGE, then press ENTER. 2 Press or to select PICTURE, then press ENTER. Language Language Picture Picture Dynamic Picture Mode English Select the language for setup display. Brightness 30 Elija el idioma de ajuste. Español Contrast 60 Color 36 Français Sélectionner langue écran config. Tint 0 Sharpness 0 Reset Settings Neutral Color Temp. Energy Saving Off 3 Press or to select English, Español, or Français, then 3 Press or to select the set
ページ15に含まれる内容の要旨
3 1 2 4 5 6 8 7 Using your TV 15 • Surround–Press or to select On or Off. To display analog channel information: •Press DISPLAY. The following information appears: • Reset Settings–Press ENTER to reset the sound settings to the factory default. 4 Press MENU to close the menu. 6 SAP /STEREO Selecting the video input source 480i 480i SSD D 4:3 4:3 To select the video input source: TV-PG DLSV CC CC •Press INPUT or CH repeatedly to select the video input source. This information includes the chan
ページ16に含まれる内容の要旨
16 Using your TV For a 16:9 video signal Checking the antenna signal strength To check the antenna signal strength: 1 Press MENU. The on-screen menu opens. Normal Zoom Cinema Wide 2 Press or to select CHANNEL, then press ENTER. • Normal–Squeezes the picture horizontally to be displayed at Channel Channel 4:3. Black bars appear on the sides of the picture. Autoscan • Zoom–Enlarges the center of the picture. The outer part of the Channel List picture is cropped. Manual Register • Wide—Displays
ページ17に含まれる内容の要旨
Using your TV 17 5 Press MENU to close the menu. Freezing the picture Using analog closed captioning To freeze the picture: •Press FREEZE. The picture freezes on the screen, but the sound To use analog closed captioning: continues to play. Press any button except POWER to return to 1 Press MENU. The on-screen menu opens. normal viewing. Notes: If your TV does not detect a signal or the signal is protected, the picture freezes and the sound is muted. After the picture is frozen for five minute
ページ18に含まれる内容の要旨
18 Using your TV • Text1 through Text4—Displays text in a large black box 3 Press or to select Closed Caption, then press ENTER. that may obstruct the picture. Text1 normally displays the Detail Detail text for the audio in the same language as the audio. Text3 normally displays the text for the audio in a second Closed Caption language. Text2 and Text4 are rarely used and usually display V–chip PC Settings information provided by the broadcaster like news or Auto HDMI1 Audio weather repor
ページ19に含まれる内容の要旨
Using your TV 19 Font Size Edge Color CC Style CC CC SStyle tyle Closed Caption CC Style Closed Caption User Setting User Setting Font Style Font Style White Font Size Large Font Size Black Font Color Font Color Middle Red Font Opacity Font Opacity Small Green Back Color Back Color Blue Back Opacity Back Opacity Yellow Edge Color Magenta Edge Color Cyan Edge Type Edge Type Font Color Edge Type CC Style CC Style Closed Caption CC Style CC Style Closed Caption User Setting User Setting Font Style
ページ20に含まれる内容の要旨
20 Using your TV 4 Press the number buttons to enter the four-digit password. If you Setting the TV Rating have not set a password, enter 0000. Many TV programs have ratings set by broadcasters. You can blick TV V- V-c ch hiip p programs based on these ratings. To set the TV rating: MPAA Rating 1 Press or to select TV Rating, then press ENTER. TV Rating Downloadable Rating V-chip V-chip Clear Downloadable Rating New Password FV V S L D TV-MA TV-14 TV-PG TV-G TV-Y7 5 Press or to select a pa
