ページ1に含まれる内容の要旨
INSTRUCTION MANUAL
20-INCH
TFT-LCD MONITOR
ADMNLCD20
Please read this manual thoroughly before use, and keep it handy for future reference.
Part Number 8200-0394-00 A 0
ページ2に含まれる内容の要旨
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS. CAUTION: CAUTION Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric sh
ページ3に含まれる内容の要旨
- 2 - FCC COMPLIANCE STATEMENT INFORMATION TO THE USER: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL INSTALLATION. THIS EQUIPMENT GENERATES, USES AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTIONS, MAY CAUSE HARMFUL INTERFEREN
ページ4に含まれる内容の要旨
- 3 - IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS -- All the safety and operating 10 OWER CORDS -- Do not allow anything to rest on the power instructions should be read before the appliance is operated. cord. Do not locate video monitor or equipment where the cord will be abused by persons walking on it. 2. RETAIN INSTRUCTIONS -- The safety and operating instructions should be retained for future reference. 11 HEED WARNINGS -- Follow all instructions marked on the video monitor or
ページ5に含まれる内容の要旨
- 4 - TABLE OF CONTENTS l Warning……………..…………………………………………………………………… 2 l FCC Compliance Statement………………………………………………………….. 3 l Important Safeguards………………………………………………………………….. 4 l Table Of Contents………………………………………………………………………. 5 l Features……….……………………………………………..………………………….. 6 l Operating Instructions-Controls ……………………………………………………….. 7 l Backside Connections………………………………………………………………….. 8 l Remote Control…………………………………………………………………………. 9 l OSD Architecture……………………………………………………………………… 12 A.
ページ6に含まれる内容の要旨
- 5 - Feature s l 20-inch LCD monitor with multiple inputs (Composite video, Y/C (SVHS) and D-sub computer) l High brightness of 500 cd/? l High contrast of 480 :1 l Wide viewing angle of 160 degrees, both vertically and horizontally l Fast LCD response time of 16ms, allowing excellent rendering of motion l Latching power supply automatically restores power after interruption or remote switching l Control button lock-out using the OSD, to minimize tampering in public view applicatio
ページ7に含まれる内容の要旨
- 6 - Operating Instructions-Control 6 5 4 3 2 1 1. Power Monitor power ON / OFF. At OFF mode, monitor will be at standby status. Green Light – Power On Red Light – Standby mode 2. 3. Adjust / Increase or decrease the value on OSD menu. Increase value or turn ON / OFF function Decrease value or turn ON / OFF function 4. Item Chose sub menu from Audio / Video / Image. 5. Menu OSD menu ON / OFF control. 6. Source
ページ8に含まれる内容の要旨
Select input signal from AV1, AV2, S-Video or PC. - 7 - Backside Connections A. BACK PANEL CONTROL 1, 2 AUDIO 2 IN (L, R) Stereo Audio Signal Input, this input is for AV2 or PC (refer to Note below) 3, 4 AUDIO 2 OUT (L, R) Audio looping outputs for AUDIO 2 5, 6 AUDIO 1 IN (L, R) Stereo Audio Signal Input, this input is for AV1 or Y/C (refer to Note below) 7, 8 AUDIO 1 OUT (L, R) Audio looping outputs for AUDIO 1 16 9 Y/C IN (SVHS) Y/C separated
ページ9に含まれる内容の要旨
- 8 - Remote Control Key Function Power Turn ON / OFF monitor. At OFF mode monitor will be standby status. Scan Provide CATV channel auto scanning. Power Scan Set Sel. (Is there a TV tuner in this model?) Set (Restricted Channel S etting) TV Channel lock for restricted program. (Unlock / Lock 1 2 3 PC channel must require password, default password: 4 5 6 0000). AV1 9 7 8 Sel.
ページ10に含まれる内容の要旨
- 9 - Remote Control Jump Return to previous channel. Memory Channel memory for TV/CATV. Select Selecting channel from memorized channels. ? Select channel forward. ? Select channel backward. - Menu OSD menu ON / OFF and selection. Item Chose sub menu from Audio / Video / Image list. + / - Increase or decrease the value on OSD menu. + Increase value or turn ON / OFF function - Decrease value or turn ON / OFF function MTS : Multi translati
ページ11に含まれる内容の要旨
- 10 - + Volume Used adjust +/- to increase / decrease volume.. + Increase volume value - Decrease volume value Channel ? Select channel forward. ? Select channel backward. 1 ~ 10 / +100 Number keys for TV/CATV channels.
ページ12に含まれる内容の要旨
- 11 - OSD Architecture A. Audio Function Audio Volume Balance Treble Bass Press the MENU button will bring up the OSD Menu. Press MENU a gain to select AUDIO. Then, press ITEM to choose functions that require proper adjustments. As shown, press key to adjust. + - Note: In remote control, press key to adjust. (After adjustment, the monitor will store new settings) Volume Controls built-in speakers’ output volumes. + Note: Volume control can als
ページ13に含まれる内容の要旨
- 12 - OSD Architecture B. Video Function Video Contrast Brightness Backlight Color Tint Color Temperature Sharpness CCD Mode Display On/Off Recall Under AV1, AV2, S-Video mode: Press the MENU button will bring up the OSD Menu. Press MENU again to select VIDEO. Then, press ITEM to choose functions that require proper adjustments. As shown, press key to adjust. + - Note: In remote control, press key to adj
ページ14に含まれる内容の要旨
- 13 - OSD Architecture Contrast Permits adjustment of contrast between light and dark areas of the picture. E xample: Setting Slide bar Brightness Adjusts the overall picture shade and brightness . Tip: Use the Brightness to make details in the dark areas of the picture to be just visible, and Contrast to “brighten” the picture without causing noises and foreheads to turn white. Back Light Adjusts panel backlight luminance. Color Adds coloring to the blac
ページ15に含まれる内容の要旨
- 14 - OSD Architecture CCD Mode If video signal source directly comes from CCD camera, using CCD Mode is suggested to obtain better picture performance. Display Displays video source title. RECALL Sets monitor to the original factory setting.
ページ16に含まれる内容の要旨
- 15 - OSD Architecture C. Image Function Image Auto Contrast Brightness Backlight H-Position V-Position Clock Phase DOS Mode Color Temperature White Balance Display Under Image mode: Press the MENU button will bring up the OSD Menu. Press MENU again to select IMAGE. Then, press ITEM to choose functions that require proper adjustments. As shown, press key to adjust. + - Note: In remote control, press key to a
ページ17に含まれる内容の要旨
(After adjustment, the monitor will store new settings) - 16 - OSD Architecture Auto Auto detect screen detail data such as clock and phase. Contrast Permits adjustment for contrast between light or dark areas of the picture. Brightness Adjusts the overall picture shade and brightness . Tip: Use the Brightness to make details in the dark areas of the picture to be just visible, and Contrast to “brighten” the picture without causing noises and foreheads to turn white. Back
ページ18に含まれる内容の要旨
- 17 - OSD Architecture Dos Mode Supports picture enhancement when using under DOS mode. Color Temperature Selects 9300 or 6500 color temperature for display. White Balance Allows the picture white balance adjustment. Display Displays video source title. Recall Sets monitor to the original factory setting.
ページ19に含まれる内容の要旨
- 18 - LCD monitor Mounting Guide A. Desktop Adjust the angle of LCD to provide comfortable viewing B. Wall mount able using two methods: 1) Using the 200 mm pre-cut holes 2) Using the VESA standard wall mount design and the 100mm hole pattern on the back panel to install the LCD monitor to the wall. C. Wall mount
ページ20に含まれる内容の要旨
- 19 - Connecting Device DVD or other video source Camera or other video source Loop out to another video device Camera or other video source PC a. Connect PC to Monitor through VGA connector as shown on the above picture b. Connect External device such as DVD or Game Player to Monitor as shown on the above picture c. Connect CCD Camera 1 and 2 to Monitor through Video Input 1 and 2 (BNC Connector) as showing on the above picture d. PC Resolution Supported 640 x 48
