ページ1に含まれる内容の要旨
4-270-413-E3(1)
Getting Started
LCD
Using Your BRAVIA TV
Digital Colour TV
Network Setup
Operating Instructions
Additional Information
KDL-60NX725 / 55HX925 / 55HX825 / 55NX725 / 46HX925 / 46HX825 / 46NX725 / 40NX725
ページ2に含まれる内容の要旨
DiSEqC™ is a trademark of EUTELSAT. Introduction Trademark information This TV supports DiSEqC 1.0. This TV is Thank you for choosing this Sony product. is a registered trademark of the DVB not intended for controlling motorized Before operating the TV, please read this Project. antennas. manual thoroughly and retain it for future HDMI, the HDMI Logo, and High- reference. Definition Multimedia Interface are trademarks or registered trademarks of The manufacturer of this product is HDMI L
ページ3に含まれる内容の要旨
Austria, Belgium, Bulgaria, Cyprus, Czech Location of the Precautions Republic, Denmark, Estonia, Finland, identification label France, Germany, Greece, Hungary, Viewing the TV Labels for Model No., Production Date Iceland, Ireland, Italy, Latvia, � Some people may experience discomfort (month/year) and Power Supply rating (in Liechtenstein, Lithuania, Luxembourg, (such as eye strain, fatigue, or nausea) accordance with applicable safety Malta, The Netherlands, Norway, Poland, while wa
ページ4に含まれる内容の要旨
� The LCD screen contains a small � Handle the remote with care. Do not Disposal of amount of liquid crystal. Some drop or step on it, or spill liquid of any waste batteries fluorescent tubes used in this TV set also kind onto it. (applicable in the contain mercury (except for LED � Do not place the remote in a location backlight LCD TV). Follow your local near a heat source, a place subject to European Union ordinances and regulations for disposal. direct sunlight, or a damp room. and
ページ5に含まれる内容の要旨
GB 5
ページ6に含まれる内容の要旨
Table of Contents Getting Started Checking the accessories ........................................................................................................8 Inserting batteries into the remote............................................................................................8 1: Attaching the Table-Top Stand ............................................................................................9 2: Adjusting the viewing angle of the TV.......................................
ページ7に含まれる内容の要旨
After setting up your BRAVIA TV and learning basic operations with this manual, see the built-in manual (i-Manual) for further explanation of the features of your TV. This TV has a built-in manual (i-Manual). To access the i-Manual, press i-MANUAL on the remote, and select an item. For details, see page 20 of this manual. Contents of the i-Manual may differ depending on the model/region/area. Contents of the i-Manual How to Use i-Manual Using Other Equipment/ Internet “BRAVIA” TV Features VCR
ページ8に含まれる内容の要旨
Getting Started Checking the accessories Inserting batteries into the remote Remote (1) Size AAA batteries (R3 type) (2) *1 Table-Top Stand (1) Fixing screws for Table-Top Stand (M5 x 16) (3) (except KDL-60NX725) Assembling screws for Table-Top Stand (M6 x 14) (4) (KDL-60/55/46NX725, KDL-55/46HX925, KDL-55/46HX825 only) Assembling screws for Table-Top Stand (M6 x 14) (3) (KDL-40NX725 only) Hexagon wrench (1) 1 Remove the protection sheet. AV/Component Adapter (1) SCART Adapter (1) 2 Push a
ページ9に含まれる内容の要旨
Getting Started For KDL-60NX725 1: Attaching the Table-Top 1 Align with the two dowels of the Table- Stand Top Stand, and gently place the TV, checking the f mark is facing the front. For KDL-55/46HX925, KDL-55/46HX825, KDL-55/46/40NX725 1 Refer to the supplied Table-Top Stand leaflet for proper attachment for some TV models. 2 Place the TV set on the Table-Top Stand. Guide pins 2 Attach the TV and Table-Top Stand with the supplied screw and hexagon wrench. ~ � Align the TV from the top
ページ10に含まれる内容の要旨
Detaching the Table-Top Stand 2: Adjusting the viewing from the TV angle of the TV To detach the Table-Top Stand from the TV, This TV can be adjusted within the angles as remove the screws fixed in step 3. For illustrated. KDL-60NX725, be sure to remove the screws for detaching the head when the Table-Top Angle adjustment (Swivel) Stand is not attached to the TV. (except KDL-60NX725) ~ ~ � Do not remove the Table-Top Stand for any � When adjusting the angle, hold the stand with one r
ページ11に含まれる内容の要旨
Getting Started Connecting a Set Top Box/recorder 3: Connecting an antenna (e.g. DVD recorder) with HDMI (aerial)/Set Top Box/ recorder (e.g. DVD recorder) ~ � Use an antenna cable connector no greater than 14 mm in thickness. � Use an HDMI cable connector within 12 mm (thickness) × 21 mm (width). Connecting a Set Top Box/recorder (e.g. DVD recorder) with SCART SCART adapter (supplied) Set Top Box/recorder (e.g. DVD recorder) Recommendation of the F type plug The one based on the followin
ページ12に含まれる内容の要旨
4: Connecting audio/video 5: Preventing the TV from devices toppling over AV/Component adapter (supplied) 1 Install a wood screw (4 mm in diameter, not supplied) in the TV stand. 2 Install a machine screw (M4, not supplied) into the screw hole of the TV. 3 Tie the wood screw and the machine screw with a strong cord (not supplied). The length of the M4 machine screw differs depending on the cord diameter. Please refer to below illustration. Screw M4 Cord Audio/video device 5-6 mm TV’s Table-
ページ13に含まれる内容の要旨
Getting Started 6: Bundling the cables 7: Performing the initial set-up ~ � Before bundling the cables, remove the cable holder from the AC cover (see step 1 and 2). Reuse the cable holder (see step 3) to bundle the other cables (see step 4). � Do not bundle the AC power cord (mains lead) together with other cables. 1 Connect the TV to your AC power 11 22 outlet (mains socket). 2 Check the ENERGY SAVING switch setting is on (z). 3 Press 1 on the TV. The = (power) 33 44 indicator will lig
ページ14に含まれる内容の要旨
Satellite Auto Tuning: – Or you can use DiSEqC command A (1st satellite) and B (2nd satellite), if The following procedures may be required your LNB or multi switch can handle depending on the area: these commands. 1 Please select “Preferred Satellite” or – For four satellite channels, DiSEqC “General Satellite”. control A, B, C, and D is required. 2 For “Preferred Satellite”, select your “LNB Low Band Frequency” and preferred operator. “LNB High Band Frequency”: – Specifies LNB frequenc
ページ15に含まれる内容の要旨
Getting Started Digital Auto Tuning: When you select “Cable”, we recommend that you select “Quick Scan” for quick tuning. Set “Frequency” and “Network ID” according to the information supplied from your cable provider. If no channel is found using “Quick Scan”, try “Full Scan” (though it may take some time). ~ � “Full Scan” may not be available depending on your region/country. Programme Sorting: Changes the order of analogue channels stored in the TV. 1 Press F/f to select the channel
ページ16に含まれる内容の要旨
Using Your BRAVIA TV Watching the TV Turn on the TV. 1 1 Switch ENERGY SAVING switch on (z). 2 Press 1 on the TV to turn on the TV. Select a mode. 2 Select a TV channel. 3 2 To use Digital Electronic Programme Guide GUIDE Press GUIDE in digital mode to display the programme guide. 3 Use with 0-9 to select digital channels. For channel numbers 10 and above, press the next digit quickly. z � The number 5, N, PROG + and AUDIO buttons on the remote have a tactile dot. Use the tactile dots as a
ページ17に含まれる内容の要旨
Using Your BRAVIA TV Parts and controls of the remote Use the supplied remote to control your TV. Basic remote operations are explained here. For details on all of the remote function, press i-MANUAL and see the built-in manual (i-Manual) (page 20). 1:/1 Press to turn the TV on and off from standby mode. 2 i-MANUAL Displays the built-in manual (i-Manual). 3 SYNC MENU Displays the BRAVIA Sync Menu to operate the BRAVIA Sync-compatible equipment that is connected to the TV. 4 F/f/G/g/ Moves the
ページ18に含まれる内容の要旨
Selecting various functions and settings (Home Menu) You can select all the features from the Home menu. See page 19 for the Home menu map. Press HOME. 1 Press F/f/G/g/ to select items. 2 2 1, 3 To select items in the Home menu (e.g., selecting “Settings”) 1 Press G/g to select “Settings”. The contents of “Settings” are displayed on the right. 2 Press F/f to select “Display”. 3 Press to launch the menu. According to the screen instruction, press F/f/G/g to select items and press to confirm
ページ19に含まれる内容の要旨
Using Your BRAVIA TV Home menu map After pressing HOME on the remote, following icons are displayed as categories. The categories are available depending on your TV model, region, country and broadcasting conditions. TV You can select a list of TV channels, or a programme guide. Media You can enjoy photo/music/video content via USB devices or the home network. Inputs You can select equipment connected to the TV. Favourites/History Provides quick access to your frequently used and recently vie
ページ20に含まれる内容の要旨
Displaying Operating Instructions (i-Manual) Operating instructions are built into your BRAVIA TV and can be displayed on the screen. To learn more about your TV features, access your i-Manual with the touch of a button. Press i-MANUAL. 1 1 Press F/f/G/g/ to select items. 2 2 To select items in the i-Manual 1 Press F/f to select an item. The contents in the item are displayed on the right as the second layer. 2 Press g to move to the second layer. 3 Press F/f to select an item from the second
