ページ1に含まれる内容の要旨
4-096-858-42 (1)
R
LCD Colour TV
GB
Operating Instructions
Before operating the TV, please read the “Safety Information”
section of this manual. Retain this manual for future reference.
BG
Инструкции за използване
Преди да използвате телевизора, прочетете раздела
"Информация за безопасността" на това ръководство.
Запазете това ръководство за бъдещи справки.
CZ
Návod k použití
Před zapnutím televizoru si prosím pozorně přečtěte část
"Bezpečnostní upozornění" v tomto návodu. Návod si uschovejt
ページ2に含まれる内容の要旨
Introduction Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. • Symbols used in the manual: Important information. Buttons shaded white on the remote control show you the buttons you have to press to follow the sequence Information on a feature. of the instructions. 1,2... Sequence of instructions. Informs you of the result of the instructions. Table of Contents Introduction ........
ページ3に含まれる内容の要旨
Safety Information For environmental and safety reasons, it Never push objects of any kind into the is recommended that the TV set is not This set is to operate on a 220-240V AC set as this could result in a fire or electric left in standby mode when not in use. supply only. Take care not to connect shock. Never spill liquid of any kind on Disconnect from the mains. However, too many appliances to the same power the set. If any liquid or solid object does some TVs may have features wh
ページ4に含まれる内容の要旨
Additional Safety Information Do not block or cover the ve ntilation opening situated on the bottom rear of the left hand side of the TV set. For ventilation, leave a space of at least 10 cm from the wall. If after transporting the TV set, directly from a cold to a warm location, or if the room temperature has changed suddenly, pictures may be blurred or show poor colour over portions of the picture. This is because condensation has formed on the mirrors or lenses inside the TV set. Let t
ページ5に含まれる内容の要旨
Checking the Accessories supplied 2 Batteries (AAA size) 2 Brackets 1 Hexagon key 1 PC input cable 2 Screws 1 Cleaning cloth 1 Remote control (RM-906) Inserting Batteries into the Remote Control Make sure you insert the supplied batteries using the correct polarities. Always remember to dispose of used batteries in an environmental friendly way. 6 Overview & Installation
ページ6に含まれる内容の要旨
Overview of Remote Control Buttons 1 TV I/ : To Temporarily Switch Off TV (standby mode): 1 wf Press this button to temporarily switch off TV (the standby indicator on the TV wd 2 lights up). Press again to switch on TV from standby mode. ws 3 To save energy we recommend switching off completely when TV is not in use. 4 After 15 minutes without TV signal and without any button being pressed, the TV switches automatically into standby mode. wa 5 w; 2 VCR or DVD on/off: press this button
ページ7に含まれる内容の要旨
Overview of the TV Buttons Remote control receiver To operate the remote control, pont it towards this receiver. Programme Up or Down Buttons (Selects TV channels) Volume control buttons Push up the flap Selecting on the front left On/Off Input source corner of the button TV. Power on indicator (green colour). Standby indicator (red colour). Power off indicator (amber colour). Lamp indicator (see page 28). Video Input jack Headphones jack S video Audio Input Input jack jacks Ove
ページ8に含まれる内容の要旨
Connecting the Aerial and VCR Connecting cables are not supplied. For more details of VCR conne ctions as well as other connections, please refer to page 24. or VCR OUT IN GB The Scart lead is optional. If you use this optional connection it can improve picture and sound quality when using a VCR. If you do not use a Scart lead, you will need to manually tune the VCR to a spare channel once the autotune procedure has been completed. Refer to “Manual Programme Preset” on page 20. Also refer
ページ9に含まれる内容の要旨
Switching On the TV and Automatically Tuning The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose the language of the menu screen 2) Choose the country in which you are going to operate the TV, 3) check how to connect optional equipment to your TV, 4) search and store all available channels (TV Broadcast) and 5) change the order in which the channels (TV Broadcast) appear on the screen. However, if you need to change any of these setting
ページ10に含まれる内容の要旨
4 A diagram will appear showing you how to connect a wide range Please connect your equipment according to this chart of equipment to your TV set. Follow the instructions and finally press the OK button to remove the picture and continue the automatic process. After the automatic tuning process has finished and the DVD optional equipment has been connected at this stage, we OK recommend you follow the instructions explained on the section "Connection Guide" on page 17 to get the optimum
ページ11に含まれる内容の要旨
Introducing and Using the Menu System Your LCD TV uses an On-Screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system: Picture Adjustment 1 To switch on the menu screens: Picture Mode: e Liv ast: Contr Reset Noise Reduction: On Colour one: T Cool Picture Adjustment Picture Mode: e Liv Press the MENU button to switch the first level menu on. ast: Contr Reset Noise Reduction: On o T Select: E nter : OK Exit: MENU Select: E
ページ12に含まれる内容の要旨
The Picture Adjustment Menu The “Picture Adjustment” menu allows you to alter the picture settings. To do this: Picture Adjustment Picture Adjustment Press the MENU button and then press OK to Picture Mode: e Liv Picture Mode: e Liv enter this menu. Next press v or V to select the ast: Contr ast: Contr Reset Reset Noise Reduction: On Noise Reduction: On desired option and press OK. Finally read below Colour one: T Cool Colour one: T Cool , how to operate into each option. OK MENU OK Select:
ページ13に含まれる内容の要旨
The Sound Adjustment Menu The “Sound Adjustment” menu allows you to Picture Adjustment alter the sound settings. Picture Mode: e Liv ast: Contr Reset Noise Reduction: On To do this: Colour one: T Cool Press the MENU button and press v to select , then press OK to enter this menu. Next press v or V to select the desired option and Select: Enter : OK Exit: MENU press OK. Finally read below how to operate into each option. m Sound Adjustment Sound Adjustment Sound Effect: Dolby Virtual Sou
ページ14に含まれる内容の要旨
Auto Volume Press v or V to select On (the volume level of the channels will stay the same, independent of the broadcast signal, e.g. in the case of advertisements) or Off (the volume level changes according to the broadcast signal). Next press OK to store. If you select “Dolby Virtual” on the “Sound Effect” option, the “Auto Volume” option will automatically be switched to “Off” and vice versa. TV Speakers This option allows you to select if you want to listen the TV from the TV speakers or
ページ15に含まれる内容の要旨
The Features Menu The “Features” menu allows you to alter vari- Picture Adjustment ous settings of the TV. Picture Mode: e Liv ast: Contr Reset Noise Reduction: On To do this: Colour one: T Cool Press the MENU button and press v twice to select , then press OK to enter this menu. Next press v or V to select the desired option Select: Enter : OK Exit: MENU and press OK. Finally read below how to m operate into each option. eatures F eatures F uto A or mat F On uto A ro mat F On V3 A Output T
ページ16に含まれる内容の要旨
AV3 OUTPUT This option allows you to select the source to be output from the Scart connector S 3/ 3 so that you can record from this Scart any signal coming from the TV or from an external equipment connected to the Scart connector 1/ 1, 2/ 2 or front connectors S 4 or 4 and 4. If your VCR supports SmartLink, this procedure is not necessary. To do this: Once you have entered into the "Features" menu as it is explained in the previous page and after selecting the option, press OK. Then pr
ページ17に含まれる内容の要旨
The Set Up Menu The “Set Up” menu allows you to alter various Picture Adjustment options on this TV. Picture Mode: e Liv ast: Contr Reset Noise Reduction: On To do this: Colour one: T Cool Press the MENU button and press v three times to select , then press OK to enter this menu. Next press v or V to select the desired Select: Enter : OK Exit: MENU option and press OK. Finally read below how to operate into each option. m Set Up Set Up Language Language Country Country Auto Tuning Auto Tu
ページ18に含まれる内容の要旨
PROGRAMME LABELS This option allows you to name a channel using up to five characters (letters or numbers). To do this: 1 Once you have entered the "Set Up" menu as it is explained in the previous page and after selecting the option, press OK, then press v or V to select the programme number with the channel you wish to name. Next press OK. 2 With the first element of the Label column highlighted, press OK and v, V, B or b to select the letter, next press OK. When you have finished, press v,
ページ19に含まれる内容の要旨
MANUAL PROGRAMME PRESET This option allows you to: a) Preset channels or the VCR channel one by one to the programme order of your choice. To do this: 1 Once you have entered the “Set Up”menu as it is explained on page 18 and after selecting the "Manual Programme Preset" option, press OK. Next with Programme option highlighted press OK. Press v or V to select which programme number you want to preset the channel on (for VCR, select programme number “0”). Then press B. 2 The following option i
ページ20に含まれる内容の要旨
PAP (PICTURE AND PICTURE) PAP divides the screen into two to watch two pictures in format 4:3 simultaneously. Switching PAP on and off 1 Press to display PAP. 03 One of the screens will be framed to indicate that this is the active screen. It means that when you want to select egador v Na ación Configur del Sistema the PAP source, you will be doing it in the active screen. Aceptar ersión V 2 Press again to remove PAP. Select: OG+ PR OG- PR e v Mo ame r F Select: On the screen appears a ba
