ページ1に含まれる内容の要旨
Portable Fish Finder
Model 96902
set uP and oPerating instructions
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
distributed exclusively by harbor Freight t ools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
sa Ve this Manual.
© ®
C
ページ2に含まれる内容の要旨
sa Ve this Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. Warning! read all instructions Failure to follow all instructions listed below may result in serious injury. sa Ve these i
ページ3に含まれる内容の要旨
12. Position batteries in proper polarity and do not install batteries of different types, charge levels, or capacities together. 13. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. sa Ve these instructions. sPeciFications Depth Range
ページ4に含まれる内容の要旨
6. The Transducer can be used directly in the water to look for Fish, but the Display unit should never be immersed. settings 1. Each option is selected by using the right or left arrow buttons. Toggle through the options by pushing the Menu PoWer button. The menu screen turns off automatically, saving any changes, after five seconds. 2. light allows the backlight to be turned on or off. Continuous operation of the backlight significantly decreases battery lifespan. 3. sensitivity adjus
ページ5に含まれる内容の要旨
• Place the transducer in 1/2” of water on the bottom of the boat, or • coat the face of the transducer with petroleum jelly and apply it firmly to the bottom of the boat, or • place it in a plastic bag filled with water. (See Figure 1) 2. do not immerse the entire Fish Finder, this unit is water resistant but not waterproof. immersing the display will permanently damage the unit. 3. Monitor the Display to observe underwater objects and fish. using the Fish Finder “freehand”: 1. Hold the t
ページ6に含まれる内容の要旨
3. Dispose of batteries properly, in a manner consistent will all State, local, and Federal laws and regulations. Please read the FolloWing careFully THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS lIST AND ASSEMBly DIAgRAM IN THIS MANUAl AS A REFERENCE TOOl ONly. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANy REPRESENTATION OR WARRANTy OF ANy KIND TO THE BUyER THAT HE OR SHE IS qUAlIFIED TO MAKE ANy REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS qUAlIFIED TO REPlACE ANy PARTS
ページ7に含まれる内容の要旨
asseMbly diagraM t ransducer (29) display record Product’s serial number here: note: If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 96902 For technical questions, please call 1-800-444-3353. Page 7
