ページ1に含まれる内容の要旨
TECHNICAL DATA / PRINTED CIRCUIT BOARD FILM
KODAK PRECISION LINE
Contact Film UCA7
—High Complexity PCB Starts With the Right Phototools—
May 2005 • TI-2037
• Designed for making contact phototools from
DARKROOM RECOMMENDATIONS
photoplotter output or other line work.
This film can be safely handled for up to a total of
Negative working, slow speed, ultraviolet sensitivity 60 minutes, before or after exposure, in up to 40 footcandles
(430 lux) of roomlight illumination substantially free o
ページ2に含まれる内容の要旨
Recommended Starting Points: RECIPROCITY With recommended processing, the reciprocity speed change Developer Time Temperature (Seconds) is negligible (1/3-photographic stop or less) within exposure range of 1/1000 second to 100 seconds; there is no change in ACCUMAX Developer contrast. 38°C (100°F) 30 seconds 35°C (95°F) 45 seconds 32°C (90°F) 60 seconds PROCESSING RA 2000 Developer Repro Developer (Liquid) Notice: Observe precautionary information on product labels and on 35°C (95°F) 30 seco
ページ3に含まれる内容の要旨
DIMENSIONAL STABILITY CURVES Dimensional stability is an all-inclusive term. In Characteristic Curve photography, it applies to size changes caused by changes in 7.0 humidity and in temperature, and by processing and aging. Exposure: 26 sec The dimensional properties of ESTAR Base may vary Process: RA 2000 Developer and Replenisher, slightly in different directions within a sheet; the differences 6.0 95F, 22 sec Densitometry: Diffuse visual that may exist, however, are not always equal betw
ページ4に含まれる内容の要旨
KODAK PRECISION LINE Contact Film UCA7 MORE INFORMATION For the latest version of technical support publications for Kodak products, visit Kodak on-line at: http://www.kodak.com/go/PCBproducts If you have questions about Kodak products, call Kodak. In the U.S.A.: 1-800-242-2424, Ext. 19, Monday–Friday 9 a.m.–7 p.m. (Eastern time) In Canada: 1-800-465-6325, Monday–Friday 8 a.m.–5 p.m. (Eastern time) From outside the US/Canada: 1-716-724-4000 Note: The Kodak materials described in this public
