ページ1に含まれる内容の要旨
December 2002 • E-24
TECHNICAL DATA / COLOR FILM
KODAK VERICOLOR Slide Film
STORAGE AND HANDLING
—NOTICE—
High temperatures or high humidities may produce
These films are discontinued.
undesirable changes in VERICOLOR Slide Film. Store
unexposed film at 13°C(55°F) or lower in the original
sealed package. To prevent condensation on film that has
KODAK VERICOLOR SLIDE FILM / 5072 been refrigerated, allow the film to warm up to room
temperature before you open the package.
(Rolls)
Use the film
ページ2に含まれる内容の要旨
EXPOSURE Using KODAK WRATTEN Gelatin Filters Use an Exposure Index (EI) of 8 with no filters over the light Equipment source. Place the WRATTEN Gelatin Filter over the lens. Expose this film with optical- or contact-printing equipment. For large-scale production, you can use printers and copying Background KODAK WRATTEN Exposure equipment modified for production applications. * Color in Slide Gelatin Filter No. Adjustment Use exposing equipment that has a tungsten-halogen Red-brown None 0 (
ページ3に含まれる内容の要旨
Note: You can freeze exposed KODAK VERICOLOR Print KODAK VERICOLOR PRINT FILM / 4111 Film to minimize changes. If you cannot process this film (Sheets) within 4 hours after exposing it, store it in a moistureproof container and freeze it to avoid changes in the latent image. KODAK VERICOLOR Print Film is intended for producing Allow the film to warm up to room temperature before you positive transparencies from color negatives and process it. internegatives for displays or photo mechanic
ページ4に含まれる内容の要旨
KODAK VERICOLOR Slide Film PROCESSING MORE INFORMATION Process KODAK VERICOLOR Print Film in KODAK Kodak has many publications to assist you with information FLEXICOLOR Chemicals for Process C-41. Do not process on Kodak products, equipment, and materials. this film in washless minilab process cycles, i.e., Process The following publications are available from Kodak C-41B and C-41RA. This film is of an older design that customer service, or from dealers who sell Kodak products, requires a sta