ページ1に含まれる内容の要旨
Dedicated Fax Line
Setup Guide
MX360 or MX410
Next
ページ2に含まれる内容の要旨
Connecting The Phone Lines Previous Next
ページ3に含まれる内容の要旨
Connecting The Phone Lines Before Wall jack After Wall jack (Phone Cord included with Canon printer) Next Previous 3
ページ4に含まれる内容の要旨
If Your Wall Plate Has Two Jacks Use the jack that supports the fax line. Previous Next 4
ページ5に含まれる内容の要旨
If Your Wall Plate Has One Jack For Two Lines If your wall jack provides one jack for two phone lines, it would be best to use a “2 Line 3 Way Adapter.” This adapter can be purchased at most stores that sell electronics. This device creates three plugs where there was one. One jack will be for your voice line. The other jack can be used for your fax transactions. In most cases, line 1 (L1) is used for phone calls; L2 is used of faxing. The third jack (L1+L2) allows access to both lines. Thi
ページ6に含まれる内容の要旨
Fax to Phone Line Connection First, connect one end of the supplied telephone cord to the telephone jack on the wall. Wall Jack (Phone Cord included with Canon printer) Previous Next 6
ページ7に含まれる内容の要旨
Fax to Phone Line Connection Next, connect the other end of the supplied telephone cord to the lower jack (labeled “L”) on the MX360 or MX410. Wall Jack (Phone Cord included with Canon printer) Previous Next 7
ページ8に含まれる内容の要旨
Setting Up The Receive Mode Previous Next
ページ9に含まれる内容の要旨
Step 1 Step 2 Turn on the MX360 or MX410 by Press the FAX button. pressing the ON button. MX360 MX410 Previous Next 9
ページ10に含まれる内容の要旨
Step 3 Step 4 Press the Menu button Use the Left or Right Arrow button to select “Receive mode set”. Previous Next 10
ページ11に含まれる内容の要旨
Step 5 Step 6 Press the OK button The “Receive mode set” screen will appear Previous Next 11
ページ12に含まれる内容の要旨
Step 7 Step 8 Use the Left or Right arrow button Ensure that “Fax only mode” is to select “Fax only mode” displayed Previous Next 12
ページ13に含まれる内容の要旨
Step 9 Step 10 Press the OK button The “Make advanced settings?” screen will appear Previous Next 13
ページ14に含まれる内容の要旨
Step 11 Step 12 Press the FAX button Your MX360 or MX410 is now set to FAX only mode. Notice that the mode is listed on the fax standby screen. Previous Next 14
ページ15に含まれる内容の要旨
To Receive A Fax When a call comes in on the fax line, the MX360 or MX410 will answer the call and begin receiving the fax. You do not have to be home or interact with the MX360 or MX410 to receive a fax. Previous 15
