ページ1に含まれる内容の要旨
SERVICE MANUAL
FACSIMILE
GD-1150/1151/1200/1201/1160/1260
Model: GD-1150/1151/1200/1201/1160/1260
Publish Date: Novemver 2003
File No. SME030007F0
R03102142202-TTEC
Ver06_2008-12
ページ2に含まれる内容の要旨
Trademarks • The official name of Windows 95 is Microsoft Windows 95 Operating System. • The official name of Windows 98 is Microsoft Windows 98 Operating System. • The official name of Windows Me is Microsoft Windows Millennium Edition Operating System. • The official name of Windows 2000 is Microsoft Windows 2000 Operating System. • The official name of Windows XP is Microsoft Windows XP Operating System. • Microsoft, Windows, Windows NT, Windows Vista and the brand names and product names of
ページ3に含まれる内容の要旨
GENERAL PRECAUTIONS REGARDING THE INSTALLATION AND SERVICE FOR e-STUDIO3511/4511, e-STUDIO281c/351c/451c, e-STUDIO350/352/450/452, e-STUDIO200L/202L/230/230L/232/280/280S/282/282S AND GD-1150/1151/1200/1201/1160/1260 The installation and service should be done by a qualified service technician. 1) Transportation/Installation - Be sure to transport the equipment with the number of people given in the following table holding the positions as indicated below. Pay full attention when h
ページ4に含まれる内容の要旨
2) Service of Machines - Basically, be sure to turn the main switch OFF and unplug the power cord during service. - Be sure not to touch high-temperature sections such as the exposure lamp, the fuser unit, the damp heater and their periphery. - Be sure not to touch high-voltage sections such as the chargers, transfer belt, 2nd transfer roller, developer, IH control circuit, high-voltage transformer, exposure lamp control inverter, inverter for the LCD backlight and power supply unit. Especial
ページ5に含まれる内容の要旨
8) Precautions against Static Electricity - The PC board must be stored in an anti-electrostatic bag and handled carefully using a wrist- band, because the ICs on it may become damaged due to static electricity. Caution: Before using the wristband, pull out the power cord plug of the equipment and make sure that there are no uninsulated charged objects in the vicinity. Caution: Dispose of used batteries and RAM-ICs including lithium batteries according to this manual. Attention: Se débarrasser
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
CONTENTS GD-1150/1151/1200/1201/1160/1260 1. SPECIFICATIONS AND OUTLINE OF SYSTEM ......................................................... 1-1 1.1 FAX Options ........................................................................................................................ 1-1 1.2 Specifications....................................................................................................................... 1-2 1.3 Features ............................................................
ページ8に含まれる内容の要旨
GD-1150/1151/1200/1201/1160/1260 © 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved CONTENTS 2
ページ9に含まれる内容の要旨
1. SPECIFICATIONS AND OUTLINE OF SYSTEM 1 1.1 FAX Options e-STUDIO3511/4511/350/450/200L/202L/203L/230/232/233/280/282/283 can be used as a FAX by installing the FAX unit (GD-1150/1151). e-STUDIO281c/351c/451c/352/353/452/453 can be used as a FAX by installing the FAX unit (GD- 1200/1201). Some options can be added when the FAX unit is installed or to extend the FAX functions ( P. 1-8 "1.5 Options"). Be sure to use the FAX unit and the 2nd line for the FAX board only in the following combinat
ページ10に含まれる内容の要旨
1.2 Specifications 1) Main system - Type Desktop type transceiver -Operation Transmission Manual/Automatic Reception Manual/Automatic 2) Scanner [ ]: at rotation transmission - Horizontal direction 16 lines/mm, 8 lines/mm [15.4 lines/mm, 7.7 lines/mm, 3.85 lines/mm] - Vertical direction 15.4 lines/mm, 7.7 lines/mm, 3.85 lines/mm [16 lines/mm, 8 lines/mm] - Combination U-Fine: 16 x 15.4 lines/mm [15.4 x 16 lines/mm] Semi-U-Fine:8 x 15.4 lines/mm [15.4 x 8 lines/mm] Note Note: :
ページ11に含まれる内容の要旨
3) Transmission system Circuits to be used: Subscriber line/FAX communication network (G3) - Calling automatic transmission (including the sequential multi-address transmission) 1 - Calling automatic reception (polling reception) - Called automatic transmission (polling transmission) - Called automatic reception - Calling manual transmission - Calling manual reception - Called manual transmission - Called manual reception Communication mode High-speed mode (Toshiba original procedure mode) G3 m
ページ12に含まれる内容の要旨
4) Recording paper - Recording method Electrophotographic recording method by LSU (Laser Scanning Unit) - Horizontal printing density 24 lines/mm (96 lines/mm with the smoothing processing) [23.1 lines/mm (92.4 lines/mm with the smoothing processing)] - Vertical printing density 23.1 lines/mm (24 lines/mm with the smoothing processing) - Recording paper size and the effective printing area Unit: mm (inch) Paper size Dimension (width x length) Printing area A5-R 148 x 210 143 x 204.5 B5-R 182 x 2
ページ13に含まれる内容の要旨
1.3 Features • A3/LD scanning 1 Scans data across A3/LD width and transmits in A3/LD actual size. • High-speed scanning Inputs an A4/LT-size transmitted document in about 0.7 seconds (A4/LT document transmitted widthwise). • High-speed transmission 33.6 Kbps high speed modem Toshiba original high-speed communication modes EX and HS JBIG encoding system • Dual Access - FAX transmission There are two types of FAX transmission: Page-by-page direct transmission and memory trans- mission that all pa
ページ14に含まれる内容の要旨
• Phone Book (1,000 addresses) Up to 1,000 addresses can be registered in the Phone Book using the large LCD control panel. • Multi-address transmission function Data are sent to multiple addresses (400 destinations) in sequence in a single operation. There are three ways to choose/enter the address - Choose from the Phone Book (up to 400 destinations) - Direct dialing (up to 400 destinations) - Mix operation (Phone Book, Direct dialing, Group destinations: up to 400 destinations) • Memory recep
ページ15に含まれる内容の要旨
1.4 Accessories and Parts The following accessories and parts come with the FAX unit: 1 Accessory Qty Operator’s manual (for facsimile function) 1 pc. Modular cord (2 m) 1 pc. Unpacking instruction 1 set Parts Qty Fax unit 1 pc. SG3 label 1 pc. FCC Part 68 label (U.S.A.): NA only 1 pc. IC label (Canada): NA only 1 pc. DTS label (EU): EU only 1 pc. Teleprompt label (New Zealand): AU only 1 pc. Notice to users label (New Zealand): AU only 1 pc. Screw 4 pc. Ground plate 1 pc. * Apply the each label
ページ16に含まれる内容の要旨
1.5 Options Extends the FAX functions when the FAX unit is installed. e-STUDIO3511/4511/350/450 Option Function Model Reversing Automatic Feeds originals MR-3015 Document Feeder (RADF) Finisher Sorts out documents to be output for the MJ-1022 FAX/copying operation (e-STUDIO3511/350) MJ-1023/1024 2nd line for FAX board Adds one extra communication line GD-1160NA/TW/EU/C Job Separator Sorts out documents to be output for the MJ-5004 FAX/copying operation e-STUDIO230/280 Option Function Model Rever
ページ17に含まれる内容の要旨
e-STUDIO352/353/452/453 Option Function Model 1 Reversing Automatic Feeds originals MR-3018 Document Feeder (RADF) Finisher Sorts out documents to be output for the MJ-1022/1101 FAX/copying operation (e-STUDIO352) MJ-1023/1024 2nd line for FAX board Adds one extra communication line GD-1160NA/TW/EU/C GD-1260NA/TW/EU/C Job Separator Sorts out documents to be output for the MJ-5004 FAX/copying operation e-STUDIO202L/203L/232/233/282/283 series Option Function Model Reversing Automatic Feeds origin
ページ18に含まれる内容の要旨
1.6 System List e-STUDIO3511/4511/350/450 Finisher ( ) Hanging type e-STUDIO3511/350 only MJ-1022 Reversing Automatic Document Feeder MR-3015 Finisher ( ) Console type MJ-1023 Finisher ( ) Console saddle stitch type MJ-1024 Bridge Kit KN-3511 e-STUDIO3511/4511 only FAX Board GD-1150NA/TW/EU Job Separator /AU/AS/C MJ-5004 e-STUDIO350/450 2nd Line for FAX Board only GD-1160NA/TW/EU/C Bridge Kit KN-3520 e-STUDIO350/450 only Drawer Module Desk Paper Feed Large Capacity MY-1021 Pedestal (PFP) Feeder
ページ19に含まれる内容の要旨
e-STUDIO230/280 Finisher 1 Reversing Automatic ( ) Hanging type Document Feeder MJ-1022 MR-3016 Finisher ( ) Console saddle stitch type Bridge Kit MJ-1025 KN-3520 FAX Board Job Separator GD-1150NA/TW/EU MJ-5004 /AU/AS/C 2nd Line for FAX Board GD-1160NA/TW/EU/C Drawer Module Paper Feed Large Capacity Desk MY-1021 Pedestal (PFP) Feeder (LCF) MH-1700 KD-1012 A4/LT KD-1011 Fig. 1-2 © 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved GD-1150/1151/1200/1201/1160/1260 SPECIFICATIONS AND OUTLINE
ページ20に含まれる内容の要旨
e-STUDIO281c/351c/451c Finisher ( ) Hanging type e-STUDIO281c/351c only MJ-1022 Reversing Automatic Document Feeder MR-3018 Finisher ( ) Console type MJ-1023 Finisher ( ) Console saddle stitch type MJ-1024 Bridge Kit KN-3511 FAX Board FAX Board GD-1200 GD-1201 2nd Line for 2nd Line for FAX Board FAX Board GD-1160 GD-1260 Drawer Module Paper Feed Large Capacity Desk MY-1021 Pedestal (PFP) Feeder (LCF) MH-1700 KD-1012 A4/LT KD-1011 Fig. 1-3 GD-1150/1151/1200/1201/1160/1260 © 2003 - 2008 TOSHIBA
