ページ1に含まれる内容の要旨
RC456
WHEEL RAKE CARRIER
Published 02/11 Part No. 4702C
OPERATOR’S MANUAL
This Operator's Manual is an integral part of the safe operation of this machine and must
be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety
and Operation Instructions contained in this manual before operating the equipment. C01-
Cover
RHINO
1020 S. Sangamon Ave.
Gibson City, IL 60936
800-446-5158
$0.00
© 2011 Alamo Group Inc.
ページ2に含まれる内容の要旨
To the Owner/Operator/Dealer All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents. BEFORE YOU START! Read the safety messages on the implement and shown in your manual. Observe the rules of safety and common sense!
ページ3に含まれる内容の要旨
TABLE OF CONTENTS SAFETY SECTION ......................................................................................... 1-1 General Safety Instructions and Practices..........................................................................................................1-2 Operator Safety Instructions and Practices ........................................................................................................1-3 Equipment Operation Safety Instructions and Practices..................
ページ4に含まれる内容の要旨
DISCONNECTING THE IMPLEMENT FROM THE TRACTOR........................................................................4-21 RAKE STORAGE..............................................................................................................................................4-22 TRANSPORTING THE TRACTOR AND IMPLEMENT ....................................................................................4-22 Transporting................................................................................
ページ5に含まれる内容の要旨
SAFETY SECTION Safety Section 1-1 © 2011 Alamo Group Inc.
ページ6に含まれる内容の要旨
SAFETY General Safety Instructions and Practices A careful operator is the best operator. Safety is of primary importance to the manufacturer and should be to the owner/operator. Most accidents can be avoided by being aware of your equipment, your surroundings, and observing certain precautions. The first section of this manual includes a list of Safety Messages that, if followed, will help protect the operator and bystanders from injury or death. Read and understand these Safety Messages before
ページ7に含まれる内容の要旨
SAFETY SAFETY Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. (SG-30) Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. (SG-31) Operator Safety Instructions and Practices Never operate the Tractor or Implement until you
ページ8に含まれる内容の要旨
SAFETY KEEP AWAY FROM ROTATING ELEMENTS to prevent entanglement and possible serious injury or death. (SG-24) Never allow children to play on or around Tractor or Implement. Children can slip or fall off the Equipment and be injured or killed. Inadvertent contact with controls can cause the Implement to shift or fall crushing themselves or others. (SG-25) DO NOT use drugs or alcohol immediately before or while operating the Tractor and Implement. Drugs and alcohol will affect an operator’s al
ページ9に含まれる内容の要旨
SAFETY SAFETY Extreme caution should be used by the Tractor operator when operating near passersby. Stop raking if anyone comes within 25 feet of the Implement to prevent possible passerby injury or death from being struck from a thrown object, entanglement with the rakes, or run over. (SRK-01) Equipment Operation Safety Instructions and Practices Do not back up with this implement. Backing could damage the machine or its components. (S3PT-4) Use extreme care when lowering or unfolding the imp
ページ10に含まれる内容の要旨
SAFETY BEFORE leaving the tractor seat lower the implement, set the parking brake and/or set the tractor transmission in parking gear, disengage the PTO, stop the engine, remove the key, and wait for all moving parts to stop. Place the tractor shift lever into a low range or parking gear to prevent the tractor from rolling. Never dismount a Tractor that is moving or while the engine is running. Operate the Tractor controls from the tractor seat only. (SG-9) Never allow children or other pers
ページ11に含まれる内容の要旨
SAFETY SAFETY Never run the Tractor engine in a closed building or without adequate ventilation. The exhaust fumes can be hazardous to your health. (SG-23) Do not exceed the rated PTO speed for the Implement. Excessive PTO speeds can cause Implement driveline or blade failures resulting in serious injury or death. (SG-26) Operate the Tractor and/or Implement controls only while properly seated in the Tractor seat with the seat belt securely fastened around you. Inadvertent movement of th
ページ12に含まれる内容の要旨
SAFETY Connecting or Disconnecting Implement Safety Instructions and Practices DO NOT use a PTO adapter to attach a non-matching Implement driveline to a Tractor PTO. Use of an adapter can double the operating speed of the Implement resulting in excessive vibration, thrown objects, and blade and implement failure. Adapter use will also change the working length of the driveline exposing unshielded driveline areas. Serious bodily injury and/or equipment failure can result from using a PTO ad
ページ13に含まれる内容の要旨
SAFETY SAFETY Transporting Safety Instructions and Practices Be particularly careful when transporting the Implement with the Tractor. Turn curves or go up hills only at a low speed and using a gradual steering angle. Rear mounted implements move the center of gravity to the rear and remove weight from the front wheels. Make certain, by adding front ballast, that at least 20% of the tractor’s weight is on the front wheels to prevent rearing up, loss of steering control or Tractor tip-over.
ページ14に含まれる内容の要旨
SAFETY Transport only at speeds where you can maintain control of the equipment. Serious accidents and injuries can result from operating this equipment at high speeds. Understand the Tractor and Implement and how it handles before transporting on streets and highways. Make sure the Tractor steering and brakes are in good condition and operate properly. Before transporting the Tractor and Implement, determine the proper transport speeds for you and the equipment. Make sure you abide by the foll
ページ15に含まれる内容の要旨
SAFETY SAFETY Secure the Implement for transport before traveling on public roads. For pull-type Implements, secure the center axle using cylinder stops or transport pin and properly attach a safety chain between the Implement and Tractor. Secure wings in upright position on folding Implements using wing transport locks. (STI-7) Always keep a careful lookout and use extreme care when working around overhead obstructions and electrical power lines. The Implement wing can be over 10 feet high.
ページ16に含まれる内容の要旨
SAFETY Do not modify or alter this Implement. Do not permit anyone to modify or alter this Implement, any of its components or any Implement function. (SG-8) Never work under the Implement, the framework, or any lifted component unless the Implement is securely supported or blocked up to prevent sudden or inadvertent falling which could cause serious injury or even death. (SG-14) Never attempt to lubricate, adjust, or remove material from the Implement while it is in motion or while tracto
ページ17に含まれる内容の要旨
SAFETY SAFETY Storage and Parking Safety Instructions and Practices A rear Implement can fall if not properly supported. Always use the stand on the front hitch (if equipped) or block up securely to prevent falling and possible crushing injury and/or other injury from holding or lifting heavy components. Use the stand to stabilize the implement during storage. (S3PT-3) To prevent tipping of Implement when stored in folded position, use carrying wheels or adequate stands on center frame. (S
ページ18に含まれる内容の要旨
SAFETY ITEM PART NO. QTY TYPE DESCRIPTION 1. 999200 1 WARNING To Avoid Serious Injury or Death 2. 00760657 1 IMPORTANT Use Genuine Rhino Parts 3. 00763977 1 INFORMATION Notice to Owner 4. 00725746 1 PELIGRO Spanish Translation 5. 3048304 1 WARNING Multi-Hazard 6. D302 2 LOGO Rhino Logo 7. 3048302 2 LOGO Model Name - RC456 8. 02962765 2 WARNING Multi-Hazard 9. 3048303 2 WARNING Stay Clear 10. 5W119 1 WARNING Speed Restriction 11. 999001 1 WARNING Multi-Hazard 12. 2738332 2 REFLCTR Red Oblong Refl
ページ19に含まれる内容の要旨
SAFETY SAFETY Decal Location NOTE: Rhino supplies safety decals on this product to promote safe operation. Damage to the decals may occur while in shipping, use, or reconditioning. Rhino cares about the safety of its customers, operators, and bystanders, and will replace the safety decals on this product in the field, free of charge (Some shipping and handling charges may apply). Contact your Rhino dealer to order replacement decals. RC456 02/11 Safety Section 1-15 © 2011 Alamo Group Inc.
ページ20に含まれる内容の要旨
SAFETY Decal Description WARNING!- Multiple Hazard and General Safety P/N 999200 For safety and to guarantee optimum product reliability always use genuine RHINO replacement parts. P/N 00760657 Operator's Manual (with repair parts) and warranty was attached to this implement during final inspection. P/N 00763977 Peligro Translation, If you do not know how to read English, please find someone who knows how to read English. P/N 00725746 RC456 02/11 Safety Section 1-16 © 2011 Alamo Group Inc. SAFE
