ページ1に含まれる内容の要旨
CTK7000_e_Cover1-4.fm 1 ページ ２０１０年７月２１日 水曜日 午後５時１７分
E
USER’S GUIDE
Please keep all information for future reference.
This recycle mark indicates that the packaging conforms to
Safety Precautions
the environmental protection legislation in Germany.
Before trying to use the keyboard, be sure to read the
separate “Safety Precautions”.
K MA1008-A Printed in China
CTK7000/WK7500E1A
CTK7000/WK7500E1A
ページ2に含まれる内容の要旨
CTK7000_e_Cover1-4.fm 2 ページ ２０１０年７月２７日 火曜日 午後３時５６分 NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio commu
ページ3に含まれる内容の要旨
CTK7000_e.book 3 ページ ２０１０年７月２１日 水曜日 午後５時１５分 Important! Please note the following important information before using this product. � Before using the optional AC Adaptor to power the unit, be sure to check the AC Adaptor for any damage first. Carefully check the power cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor that is seriously damaged. � Never attempt to recharge batteries. � Do not use rechargeable batteries. � Never mix old batterie
ページ4に含まれる内容の要旨
CTK7000_e.book 2 ページ ２０１０年７月２１日 水曜日 午後５時１５分 Contents General Guide ............................. E-4 Using the Mixer .........................E-36 Reading the Display ............................................... E-6 Mixer Overview..................................................... E-36 Modes..................................................................... E-7 Mixer Operation.................................................... E-37 Menus.................................................
ページ5に含まれる内容の要旨
CTK7000_e.book 3 ページ ２０１０年７月２１日 水曜日 午後５時１５分 Contents Using the Pattern Reference.................................E-148 Error Messages .................................................. E-148 Sequencer ............................... E-102 Troubleshooting.................................................. E-150 About the Pattern Sequencer ............................. E-102 Specifications ..................................................... E-152 Creating a User Rhythm..........................
ページ6に含まれる内容の要旨
CTK7000_e.book 4 ページ ２０１０年７月２１日 水曜日 午後５時１５分 General Guide • Illustrations in this User’s Guide show the WK-7500. L-1 - L-18 C-1 - C-17 Dial S-2 S-1 D-1 - D-12 R-1 - R-20 T-1 - T-9 Back E-4
ページ7に含まれる内容の要旨
CTK7000_02_e.fm 5 ページ ２０１０年８月２日 月曜日 午前１１時１６分 General Guide • In this manual, the term “Digital Keyboard” refers to the CTK-7000/WK-7500. • This manual uses the numbers and names below to refer to buttons and controllers. � The following explains the meanings of the # and $ symbols that appear on the product console and with the key names below. # : Indicates a function that is enabled by holding down the R-13 (FUNCTION) button when pressing a button. For example, SONG SEQUENCER, # EDIT means
ページ8に含まれる内容の要旨
CTK7000_e.book 6 ページ ２０１０年７月２１日 水曜日 午後５時１５分 General Guide Tempo, measure, beat area Reading the Display Tempo is shown as the current setting value, as beats per minute. Auto Accompaniment, the metronome (page This section explains the contents of the Digital Keyboard’s E-19), and other playback is performed at the tempo display screen. shown here. The MEASURE and BEAT values are counted up as Auto Accompaniment, the metronome, or 1 2 other playback progresses. Currently Selected Item
ページ9に含まれる内容の要旨
CTK7000_e.book 7 ページ ２０１０年７月２１日 水曜日 午後５時１５分 General Guide Modes Menus Your Digital Keyboard has three modes: a rhythm mode, a You can use the same operations to display mode and card mode, and a song sequencer mode. The currently function specific menus. To display a menu, hold down the selected mode is shown as an indicator on the display. R-13 (FUNCTION) button as you press the C-17 (MENU) button. For example, the “Performance” menu shown below will appear if you perform the above operat
ページ10に含まれる内容の要旨
CTK7000_e.book 8 ページ ２０１０年７月２１日 水曜日 午後５時１５分 General Guide Saving Settings Your Digital Keyboard is equipped with a song sequencer and other features that you can use to store data you create. This stored data is retained even when the Digital Keyboard is * turned off. However, the tone, rhythm, and other settings you configure on the Digital Keyboard’s console normally are returned to their initial power on defaults whenever you turn off power. You can configure the Digital Keyboard so it
ページ11に含まれる内容の要旨
CTK7000_02_e.fm 9 ページ ２０１０年８月４日 水曜日 午後１２時１７分 Getting Ready to Play Using a Household Power Outlet Preparing the Music Stand Make sure that you use only the AC adaptor (JEITA Standard, with unified polarity plug) specified for this product. Use of a Music stand different type of AC adaptor can cause malfunction. Specified AC Adaptor: AD-A12150LW Use the supplied power cord to connect the AC adaptor as shown in the illustration below. T-7 (DC 12V) jack Household power outlet Power Supply Prep
ページ12に含まれる内容の要旨
CTK7000_e.book 10 ページ ２０１０年７月２１日 水曜日 午後５時１５分 Getting Ready to Play ■ Low Battery Indication Using Batteries The following shows the approximate battery life. You can use six D-size batteries for power. * 4 hours on alkaline batteries � Use alkaline or zinc-carbon batteries. * The above values are standard battery life at normal Never use oxyride or any other nickel based batteries. temperature, with the volume at medium setting. Temperature extremes or playing at very loud volume 1. Open t
ページ13に含まれる内容の要旨
CTK7000_02_e.fm 11 ページ ２０１０年８月５日 木曜日 午後３時３８分 Connections Connecting Headphones Outputting Digital Keyboard Sound to Audio Equipment or an Using headphones cuts off output from the built-in speakers, which means you can practice playing even late at night Amplifier without disturbing others. • Be sure to turn down the volume level before connecting You can connect audio equipment or a music amplifier to the headphones. Digital Keyboard and then play through external speakers for more powe
ページ14に含まれる内容の要旨
CTK7000_e.book 12 ページ ２０１０年７月２１日 水曜日 午後５時１５分 Connections Output of External Device Input that is Outputting Input from an External Affected by the Digital Keyboard’s Effects Device or a Microphone through Use a commercially available connecting cord to connect the the Digital Keyboard’s Speakers external device to the Digital Keyboard’s T-5 (INST IN) jack. The connecting cord should have a standard plug (monaural) You can use the Digital Keyboard’s speakers to output sound on one end an
ページ15に含まれる内容の要旨
CTK7000_02_e.fm 13 ページ ２０１０年８月２日 月曜日 午前１１時１８分 Selecting and Playing a Tone R-1 - R-12 L-1 L-1 L-4 L-4 R-1 R-12 R-1 R-12 L-2 L-2 R-14 R-14 L-14 L-14 L-17 L-17 R-19 R-19 L-15 L-15 L-18 L-18 R-20 R-20 To turn on Digital Keyboard power � Under its initial configuration, the Digital Keyboard will 1. Rotate the L-2 (MAIN VOLUME) knob towards return to its default settings whenever you turn it off. MIN to set the volume to a low level. You can change the initial configuration to have the Di
ページ16に含まれる内容の要旨
CTK7000_e.book 14 ページ ２０１０年７月２１日 水曜日 午後５時１５分 Selecting and Playing a Tone ■ To disable Auto Power Off Selecting a Tone 1. While the Digital Keyboard is turned on, press The tones of this Digital Keyboard are divided among groups, the L-1 (POWER) button to turn it off. each of which corresponds to one of the 12 TONE buttons. You can specify a tone by its group and its tone number. 2. While holding down the L-4 ([A] POPS/ROCK/ Use the following procedure to select a single tone that is DANCE
ページ17に含まれる内容の要旨
CTK7000_e.book 15 ページ ２０１０年７月２１日 水曜日 午後５時１５分 Selecting and Playing a Tone � Three tones, two layered tones for the right range and 5. Now you can play on the keyboard using the one tone for the left range of the keyboard (page E-17) tone you selected. This configuration uses the UPPER 1 part, UPPER 2 part, and LOWER part (Layer: On, Split: On). � You also can use the R-14 (–, +) buttons to select a tone. Holding down either button will scroll through tone numbers at high speed. Pressing b
ページ18に含まれる内容の要旨
CTK7000_02_e.fm 16 ページ ２０１０年８月２日 月曜日 午前１１時１８分 Selecting and Playing a Tone R-14 R-14 R-19 R-19 R-20 R-20 To layer two tones To split the keyboard between two tones 1. Refer to the separate “Appendix” to look up the 1. Refer to the separate “Appendix” to look up the group(s) and numbers of the two tones (UPPER group(s) and numbers of the tones (UPPER 1 1 part tone and UPPER 2 part tone) you want to part tone and LOWER part tone) you want to use. use. 2. Check to make sure that the @ and A 2.
ページ19に含まれる内容の要旨
CTK7000_e.book 17 ページ ２０１０年７月２１日 水曜日 午後５時１５分 Selecting and Playing a Tone To specify the keyboard split point To use layer and split together 1. While holding down the R-19 (SPLIT) button, 1. Perform steps 1 through 6 of the procedure press the keyboard key that you want to be the under “To layer two tones” (page E-16). leftmost key in the right side (UPPER 1 part) 2. Refer to the separate “Appendix” to look up the range. group and the number of the tone you want to LOWER part UPPER 1 part
ページ20に含まれる内容の要旨
CTK7000_e.book 18 ページ ２０１０年７月２１日 水曜日 午後５時１５分 Selecting and Playing a Tone Raising and Lowering Keyboard Using Octave Shift Tuning (Transpose) You can use octave shift to individually change the octave of the UPPER 1, UPPER 2, and LOWER parts. You can use The transpose feature lets you raise or lower the overall octave shift to raise or lower the octave of a song, to assign tuning of the keyboard in semitone steps. You can use this different octaves to the left side and right side keyboard
