Metra Electronics 99-9223の取扱説明書

ページ1に含まれる内容の要旨

9 9 - 9 2 2 3
VEH IC LE AP P LIC ATIO N S
Housing •
Volvo S60 / V70 2001-04
• DIN Head Unit
Provision with
Pocket
• Phillips screw
driver
• T-25 Torx Driver
Questions?
Call the Help Line
(800)253 TECH
1-800-221-0932 • www.metraonline.com
INST 999223
rev. 06-18-07 COPYRIGHT© 2002-07 METRA ELECTRONICS CORPORATION
INSTALLATION INSTRUCTIONS
TOOLS REQUIRED
KIT COMPONENTS
KIT FEATURES

ページ2に含まれる内容の要旨

9 9 - 9 2 2 3 • Dash Disassembly 1 • Kit Assembly Volvo S60 / V70 • DIN Head Unit Provision with Pocket 2 • Final Assembly •All Vehicles 4 T ABLE OF CONTENTS

ページ3に含まれる内容の要旨

9 9 - 9 2 2 3 9 9 - 9 2 2 3 9 9 - 9 2 2 3 Vo lv o S 6 0 / V 7 0 9 9 - 9 2 2 3 Vo lv o S 6 0 / V 7 0 A A 1 Disconnect the negative battery terminal to prevent an accidental A) Strip wire ends back 1/2" short circuit. B) Twist ends together 2 Unsnap gearshift trim C) Solder bezel and slide back. D) Tape B See figure A 3 Remove (2) T-25 Torx from climate control 1 Locate the factory wiring harness in the assembly, angle the dash. Metra recommends using the climate cont

ページ4に含まれる内容の要旨

9 9 - 9 2 2 3 9 9 - 9 2 2 3 9 9 - 9 2 2 3 Vo lv o S 6 0 / V 7 0 9 9 - 9 2 2 3 Vo lv o S 6 0 / V 7 0 1 With a Phillips screwdriver, Snap the Radio Housing 5 A E remove the kit rear support into radio bracket and bracket. replace rear support brackets removed in See figure A step #1. See figure E After removing radio, with a Slide the DIN cage into 6 2 B T-25 Torx driver remove (5) the radio opening, secure F screws from radio bracket. by bending the metal locking tabs down.* See figure B See f