ページ1に含まれる内容の要旨
RD-MD5(B)-Cover.fm Page 1 Wednesday, December 2, 1998 11:39 AM
POWERED WOOFER CD-MD SYSTEM
RD-MD5
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial No.
which are located either on the rear, bot-
tom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT0107-006A
[B]
ページ2に含まれる内容の要旨
RD-MD5(B)-Warning.fm Page 1 Wednesday, December 2, 1998 11:41 AM Warnings, Cautions and Others IMPORTANT FOR LASER PRODUCTS IMPORTANT for the U.K. DO NOT cut off the mains plug from this equipment. If the plug fit- REPRODUCTION OF LABELS ted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. 1 CLASSIFICATION LABEL, PLACED ON EXTERIOR SURFACE BE SURE to replace the
ページ3に含まれる内容の要旨
RD-MD5(B)-Warning.fm Page 2 Wednesday, December 2, 1998 11:41 AM SAFETY INSTRUCTIONS “SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT” This equipment has been disigned and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. ✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮ Do read the operating instructions before you attempt to use the equipment. Do ensure that all electri
ページ4に含まれる内容の要旨
RD-MD5(B)-e.fm Page 1 Wednesday, December 2, 1998 11:40 AM Thank you for purchasing the JVC Powered Woofer CD-MD System. We hope it will be a valued addition to your home, giving you years of enjoyment. Be sure to read this instruction manual carefully before operating your new stereo system. In it you will find all the information you need to set up and use the system. If you have a query that is not answered by the manual, please contact your dealer. Features Here are some of the things t
ページ5に含まれる内容の要旨
RD-MD5(B)-e.fm Page 2 Wednesday, December 2, 1998 11:40 AM Getting Started ■ ■ Accessories Check that you have all of the following items, which are supplied with the System. Power Cord (1) AM Loop Antenna (1) Remote Control (1) Batteries (2) If any of these items are missing, contact your dealer immediately. How To Put Batteries In the Remote Control Match the polarity (+ and –) on the batteries with the + and – markings in the battery compartment. R6P(SUM-3)/AA(15F) CAUTION: Handle batter
ページ6に含まれる内容の要旨
RD-MD5(B)-e.fm Page 3 Wednesday, December 2, 1998 11:40 AM CAUTION: Make all connections before plugging the System into an AC power outlet. Connecting the FM Antenna If reception is poor, connect an FM outside antenna (not supplied) FM broadcast reception is made with the telescopic antenna. Fully as follows. extend and turn it to obtain the best reception. 'LVFRQQHFW#WKH#FDEOH#ZLUH#IURP#WKH#)0#:80RKP#&2$;,$/#WHUPL0 QDO#RQ#WKH#EDFN#RI#WKH#6\VWHP1#7KHQ/#FRQQHFW#D#:80RKP#DQWHQQD#ZLWK FRD[LDO
ページ7に含まれる内容の要旨
RD-MD5(B)-e.fm Page 4 Wednesday, December 2, 1998 11:40 AM CAUTION: Make all connections before plugging the System into an AC power outlet. Connecting Auxiliary Equipment Connect an (not supplied) signal cord between the AUX IN terminal on the System and the output terminals of your auxiliary equipment (e.g. turntable). You can listen to this source. Pin-plug x 2 Turntable (with built-in equalizer) (not supplied) Stereo mini plug Signal cord (not supplied) Connecting the AC Power Cord F
ページ8に含まれる内容の要旨
RD-MD5(B)-e.fm Page 5 Wednesday, December 2, 1998 11:40 AM Common Operations ■ ■ ACTIVE CLEAR SOUND PHONES SUPER DISPLAY WOOFER VOLUME+,– VOLUME+,– ACTIVE CLEAR MID/TREBLE SOUND indicator SUPER DISPLAY ACS WOOFER /CHARA. VOLUME+,– VOLUME+,– STANDBY indicator MID+,– TREBLE+,– For private listening Turning the Power On and Off Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers. Turning the System On —————— Be sure to turn down the volume before connecting or put
ページ9に含まれる内容の要旨
RD-MD5(B)-e.fm Page 6 Wednesday, December 2, 1998 11:40 AM ACS (Active Clear Sound) Effect The Active Clear Sound circuitry emphasizes the high frequency range level in conjunction with the bass level so that you can obtain clear sound at high frequencies. You can use this effect only for playback. To get the effect, press the ACTIVE CLEAR SOUND button on the Unit or the ACS button on the Remote Control. The "ACS" indicator lights up and "ACS ON" appears on the dis- play for 3 seconds. The "A
ページ10に含まれる内容の要旨
RD-MD5(B)-e.fm Page 7 Wednesday, December 2, 1998 11:40 AM Using the Tuner ■ ■ TUNER BAND Number Keys AUTO PRESET JOG dial FM MODE TUNER BAND 4 ¢ FM mode 4 ¢ Band, Frequency, Preset channel indicator When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section. You can listen to FM and AM (MW/LW) stations. Stations can be JOG dial: Turn it to the right or left to increase or decrease the tuned in manually, automatical
ページ11に含まれる内容の要旨
RD-MD5(B)-e.fm Page 8 Wednesday, December 2, 1998 11:40 AM Presetting Stations To Change the FM Reception Mode Presetting Stations You can preset up to 30 FM stations and up to 15 AM (MW/LW) When you are tuned in an FM broadcast, the "STEREO" indicator stations. lights up and you can hear stereo effects. Note: Preset numbers may have been set to factory test frequen- If an FM stereo broadcast is hard to receive or noisy, you can select cies prior to shipment. This is not a malfunction. You
ページ12に含まれる内容の要旨
RD-MD5(B)-e.fm Page 9 Wednesday, December 2, 1998 11:40 AM Using the CD Player ■ ■ Number Keys DISPLAY/CHARA. REPEAT JOG dial CD 6 PROGRAM RANDOM 0 CD CD 6 CD 0 4 ¢ 7 4 ¢ 7 Track number, Playing Repeat time, Preset number Play mode indicator indicator When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section. CD indicator Music calender OVER indicator which lights up if the number of tracks of the CD exceeds 20
ページ13に含まれる内容の要旨
RD-MD5(B)-e.fm Page 10 Wednesday, December 2, 1998 11:40 AM • Press the 4 button or turn the JOG dial to the left by 1 click To delete all the tracks in the program, press the 7 button re- to skip to the beginning of the track being played. Press the 4 peatedly until all the tracks are cleared. Turning off the power or button twice quickly or turn the JOG dial to the left by 2 clicks pressing the 0CD button to open the tray will also clear the pro- quickly to skip to the beginning of the prev
ページ14に含まれる内容の要旨
RD-MD5(B)-e.fm Page 11 Wednesday, December 2, 1998 11:40 AM (Listening to an MD) Using the MD Player ■ ■ Number Keys DISPLAY/CHARA. DISPLAY MD 6 JOG dial RANDOM PROGRAM 0 MD REPEAT 0 MD MD 6 4 ¢ Track number, Playing time, 4 ¢ 7 7 Play mode indicator Preset number Repeat indicator When the System is in use, the display shows other items as well. MD indicator Music calender OVER indicator which lights For simplicity, we show here only the items described in this section. up if the number
ページ15に含まれる内容の要旨
RD-MD5(B)-e.fm Page 12 Wednesday, December 2, 1998 11:40 AM Locating a Track with Remote Con- 6. Repeat step 5 to select the other tracks for ■ trol Directly ———————————— the program. During playback or in Stop mode, press the number keys on the Re- You can see the total playback time of programmed tracks on mote Control to directly play a track. the display. Also, you can see the programmed tracks on the To directly play the track 5, press 5. music calender. To directly play the track 15,
ページ16に含まれる内容の要旨
RD-MD5(B)-e.fm Page 13 Wednesday, December 2, 1998 11:40 AM Repeating Tracks You can repeat the tracks or individual track as many times as you like. Press the REPEAT button on the Remote Control. The Repeat indicator changes with each press of the button, as shown below. = ALL= blank display = (back to the beginning) : Repeats one track. ALL : In Normal Play mode, repeats all the tracks. In Program Play mode, repeats all the tracks in the program. In Random Play mode, repeats all the track
ページ17に含まれる内容の要旨
RD-MD5(B)-e.fm Page 14 Wednesday, December 2, 1998 11:40 AM Recording onto an MD ■ ■ DISPLAY /CHARA. MD 6 DISPLAY CD 6 MD REC indicator Track number, Playing time CD 6 MD REC MD 6 7 When the System is in use, the display shows other items as well. OVER indicator which lights MD indicator Music calender up if the number of tracks of For simplicity, we show here only the items described in this section. the MD exceeds 20. Recording onto an MD from any of the sound sources is simple. Just (Se
ページ18に含まれる内容の要旨
RD-MD5(B)-e.fm Page 15 Wednesday, December 2, 1998 11:40 AM Track Marking for Tuner/AUX Re- One Track Recording ———————— cording ——————————————— 1. Insert an MD with its label side up. ■ • Whenever no sound at the playback side continues for 3 or more seconds, the track number at the MD side is automati- 2. Play the track on the CD you wish to ■ cally increased by 1. record. • The track number at the MD side is automatically increased by 3. Press the MD REC button on the Unit. ■ 1 by press
ページ19に含まれる内容の要旨
RD-MD5(B)-e.fm Page 16 Wednesday, December 2, 1998 11:40 AM Moving tracks (MOVE function) Erasing all the tracks (ALL ERASE Tracks can be moved around so that they are in the desired se- function) quence. All the tracks can be erased at once without recording fresh material Track No. over them. Track No. Track A Track B Track C Track D MOVE Track A Track B Track C Track D ALL ERASE Track A Track C Track D Track B New tracks can be recorded. Erasing tracks (ERASE function) This enables unnece
ページ20に含まれる内容の要旨
RD-MD5(B)-e.fm Page 17 Wednesday, December 2, 1998 11:40 AM • You can also complete editing operation by pressing the 3. Press the EDIT button until "MOVE ?" is dis- ■ button to turn off the power. played. To cancel the operation, press the CANCEL button in step 4, 5, Each time you press the button, the display changes as follows. or 7 until the display returns to the original display before editing the track. Current display=DIVIDE=JOIN=MOVE=ERASE=ALL Note: While “UTOCwriting” is displaye
