ページ1に含まれる内容の要旨
INSTALLATION INSTRUCTIONS FOR PART 99-3000
APPLICATIONS
CHEVROLET:
BLAZER 92-94/PICKUP 88-94/SUBURBAN 92-94
GMC:
C-SERIES 88-94/SUBURBAN 92-94/YUKON 92-94
99-3000
AW-333GM/DW-3000/CK-333GM
99-3000
KIT FEATURES
• DIN Mount Radio Provision
• ISO Mount Radio Provision
KIT COMPONENTS
A) Radio Housing • B) ISO Brackets
B
A
TOOLS REQUIRED:
Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2004-2008 METRA ELECTRONIC
ページ2に含まれる内容の要旨
99-3000 TABLE OF CONTENTS Dash Disassembly . . . . . . . . . . . .............................1 Kit Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Kit Assembly - DIN Mount Radio Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - ISO Mount Radio Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ3に含まれる内容の要旨
99-3000 DASH DISASSEMBLY C CH HE EV VR RO OL LE ET T:: B BL LA AZ ZE ER R 9 92 2- -9 94 4/ /P PIIC CK KU UP P 8 88 8- -9 94 4 S SU UB BU UR RB BA AN N 9 92 2- -9 94 4 G GM MC C:: C C- -S SE ER RIIE ES S 8 88 8- -9 94 4/ /S SU UB BU UR RB BA AN N 9 92 2- -9 94 4 Y YU UK KO ON N 9 92 2- -9 94 4 1 Disconnect the negative battery ter- A minal to prevent an accidental short circuit. 2 Pull out on the bottom of the radio trim bezel. Unhook the top corners of the bezel and remove. (Figure A) 3 Remove
ページ4に含まれる内容の要旨
99-3000 KIT PREPARATION C CH HE EV VR RO OL LE ET T:: B BL LA AZ ZE ER R 9 92 2- -9 94 4/ /P PIIC CK KU UP P 8 88 8- -9 94 4 S SU UB BU UR RB BA AN N 9 92 2- -9 94 4 G GM MC C:: C C- -S SE ER RIIE ES S 8 88 8- -9 94 4/ /S SU UB BU UR RB BA AN N 9 92 2- -9 94 4 Y YU UK KO ON N 9 92 2- -9 94 4 1 Remove the a/c vents from the fac- A tory dash panel by releasing the spring fastening clips securing them to the panel. Mount the vents to the Replacement Dash Panel by insert- ing the inner edge of the
ページ5に含まれる内容の要旨
99-3000 KIT ASSEMBLY C CH HE EV VR RO OL LE ET T:: BLAZER 92-94/PICKUP 88-94 BLAZER 92-94/PICKUP 88-94 S SU UB BU UR RB BA AN N 9 92 2- -9 94 4 G GM MC C:: C C- -S SE ER RIIE ES S 8 88 8- -9 94 4/ /S SU UB BU UR RB BA AN N 9 92 2- -9 94 4 Y YU UK KO ON N 9 92 2- -9 94 4 DIN MOUNT RADIO PROVISION Note: Refer also to the instructions included with the aftermarket radio. 1 Slide the DIN cage into the radio A housing and secure by bending the metal locking tabs outward. (Figure A) 2 Slide the af
ページ6に含まれる内容の要旨
99-3000 FINAL ASSEMBLY FINAL ASSEMBLY A (A) Strip wire ends back 1/2" B B) Twist ends together C) Solder D) Tape C D 1 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individ- ually tape off the ends of any unused wires to prevent electrical short circuit.) 2 Re-connect the negative battery terminal and test the unit for proper operation. 3 Reassemble radio and dash assemblies in reverse order of disas
ページ7に含まれる内容の要旨
99-3000 NOTES 5
ページ8に含まれる内容の要旨
99-3000 INSTRUCTIONS www.metraonline.com 1-800-221-0932 REV. 03/25/08 © COPYRIGHT 2004-2008 METRA ELECTRONICS CORPORATION INST99-3000
