ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
RC-20XL_e.book 2 ページ ２００４年４月２８日 水曜日 午後４時１２分 Contents Main features.............................................................................................3 Panel Descriptions....................................................................................4 Front Panel........................................................................................................ 4 Rear Panel .........................................................................................
ページ3に含まれる内容の要旨
RC-20XL_e.book 3 ページ ２００４年４月２８日 水曜日 午後４時１２分 Main features ■ Simple and reliable loop play The new “loop quantize” function automatically adjusts the timing of the loop end. This makes it easy for anyone to create looped phrases of an accurate length. ■ Up to 16 minutes of extended phrase recording You can save up to eleven different loop phrases for a total of 16 minutes of recording. ■ Overdubbing undo/redo capability If you make a mistake in overdubbing, you can can
ページ4に含まれる内容の要旨
RC-20XL_e.book 4 ページ ２００４年４月２８日 水曜日 午後４時１２分 Panel Descriptions Front Panel fig.02-01 1 2 3 4 5 10 6 7 8 9 1 * The light flashes rapidly to indicate there is not enough memory to save the phrase. LEVEL Knob * The light flashes rapidly while the loop phrase is This knob adjusts the play volume of the read from memory. Be careful not to turn off the phrase. power while this light is flashing rapidly. * This knob does not adjust the input level from ONE SHOT PHRASE Indicator th
ページ5に含まれる内容の要旨
RC-20XL_e.book 5 ページ ２００４年４月２８日 水曜日 午後４時１２分 Panel Descriptions 4 7 MIC Knob WRITE Button This knob adjusts the input level from the •This button is used to save a recorded MIC jack. phrase into internal memory (p. 29). INST Knob •When this button is pressed while the SHIFT This knob adjusts the input level from the (EXIT) button is held down, it functions as the INST jack. DELETE button, allowing you to delete the PEAK Indicator phrase on the selected track (p. 31). This
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
RC-20XL_e.book 7 ページ ２００４年４月２８日 水曜日 午後４時１２分 Panel Descriptions Rear Panel fig.02-03 15 16 17 18 19 20 21 15 19 INST Jack REVERSE Jack A guitar or other instrument can be If you wish to use a pedal to play back the connected to this jack. phrase in reverse, connect a pedal switch (sold separately; e.g., FS-5U) to this jack. 16 20 MIC Jack Accepts connection of a microphone. OUTPUT Jack Used when you wish to record a vocal or Connect a guitar amp or monitor speaker to instrum
ページ8に含まれる内容の要旨
ページ9に含まれる内容の要旨
ページ10に含まれる内容の要旨
RC-20XL_e.book 10 ページ ２００４年４月２８日 水曜日 午後４時１２分 Making connections * Howling could be produced depending on the location of microphones relative to amp. This can be remedied by: 1. Changing the orientation of the microphone(s). 2. Relocating microphone(s) at a greater distance from speakers. 3. Lowering volume levels. * If the amp and microphone are close together, the sound played back from the amp may be picked up by the microphone. If you record or overdub in such a state, the amp p
ページ11に含まれる内容の要旨
RC-20XL_e.book 11 ページ ２００４年４月２８日 水曜日 午後４時１２分 Making connections Important Before you turn off the power, make sure that the following conditions are met. All saved data may be lost if the power is turned off inappropriately. • You must not be playing/recording/overdubbing a phrase (The REC, PLAY, and OVERDUB indicators must not be lit) • The WRITE indicator or EXIT indicator must not be lit • The LOOP PHRASE or ONE SHOT PHRASE indicator is not flashing rap
ページ12に含まれる内容の要旨
ページ13に含まれる内容の要旨
RC-20XL_e.book 13 ページ ２００４年４月２８日 水曜日 午後４時１２分 Recording a guitar or vocal performance to create a loop phrase * If the internal memory is used up, recording 1. Turn the PHRASE SELECT knob to or overdubbing may stop before you are select an empty phrase track 1–11. finished. If this occurs, erase unnecessary If there are any empty phrase tracks, phrases (p. 31), and try the operation again. both the LOOP PHRASE and ONE SHOT PHRASE indicators remain off. 7. Press t
ページ14に含まれる内容の要旨
ページ15に含まれる内容の要旨
RC-20XL_e.book 15 ページ ２００４年４月２８日 水曜日 午後４時１２分 Recording a phrase from CD/MD to create a loop phrase 1. Turn the PHRASE SELECT knob to select an empty phrase track 1–11. If there are any empty phrase tracks, both the LOOP PHRASE and ONE SHOT PHRASE indicators remain off. If there are no empty phrase tracks, or when the LOOP PHRASE and ONE SHOT PHRASE indicators flash, indicating that the memory is full, delete any unnecessary phrases to free up some memory (p. 31). 2. Press t
ページ16に含まれる内容の要旨
RC-20XL_e.book 16 ページ ２００４年４月２８日 水曜日 午後４時１２分 Recording a phrase from CD/MD to create a loop phrase 5. To have recording start simultaneously with playback of a CD or MD, set the AUTO START button to ON (with the indicator lit). When AUTO START button is on, stop the CD/MD player for now, and put it in playback-ready mode. 6. Press the left pedal to begin recording. If the AUTO START button is on, recording will begin the moment the CD/MD begins to play. If the AUTO START butt
ページ17に含まれる内容の要旨
ページ18に含まれる内容の要旨
RC-20XL_e.book 18 ページ ２００４年４月２８日 水曜日 午後４時１２分 Playing/overdubbing along with a saved phrase fig.06-02 1 3 3 ( ) 2 ( ) 8 4 ( ) 5, 6 4 , 7 1. Select a phrase track 2. Select the recording method 3. Adjust the recording level 4. (Adjust the tempo) 5. Start playback 6. Start/stop overdubbing 7. Stop playback 8. (Save the phrase) 1. Turn the PHRASE SELECT knob to select the phrase track in which the desired phrase is saved. The LOOP PHRASE or ONE SHOT PHRASE indicator flashes rapidly
ページ19に含まれる内容の要旨
RC-20XL_e.book 19 ページ ２００４年４月２８日 水曜日 午後４時１２分 Playing/overdubbing along with a saved phrase 3. Turn the MIC knob or INST knob to adjust the recording level. 4. If necessary, press the TAP TEMPO button several times to set the tempo. You can also set the tempo by pressing the right pedal instead of the TAP TEMPO button. * For details on setting the tempo, refer to “Setting the tempo” (p. 33). * It is not possible to adjust the tempo beyond a certain limit. 5. Press the left
ページ20に含まれる内容の要旨
