ページ1に含まれる内容の要旨
Quick Setup Guide
1 EZ Record
HDD & DVD RECORDER
2 Getting Connected
3 DTV Functions DVD-893M/895M/897M
4 Basic Operation
1 EZ Record
Recordable Discs
This function allows you Initialise and Finalise a disc automatically. DVD-RAM/±RW/±R
(Refer to page 48 of the Instruction Manual for more information.)
1. With the unit in Stop mode, press the MENU button.
2. Press the buttons to select Setup, then press the OK or ► button.
3. Press the buttons to select Recording, then press the
ページ2に含まれる内容の要旨
Antenna + VCR/Satellite receiver + HDD & DVD Recorder + TV Before making or changing any rear panel connections, make sure that all components are switched off and unplugged from the wall outlet. Wall Connect the cable from the antenna/cable TV outlet to HDD & AV amplifier (receiver) ▼ DVD Recorder. Connect the AV1 connector on HDD & DVD Recorder to the SCART AV connector on TV using a SCART cable. Also use the Video/Audio Cable to connect AUDIO OUT(R/L)/VIDEO OUT jacks on the HDD
ページ3に含まれる内容の要旨
1. With the unit in Stop mode, press the MENU button. 2. Press the buttons to select “Disc Manager”, then 3 DTV Functions press the OK or ► button. 3. Press the ◄ ► buttons to select “Format”, then press Display Screen the OK button. HDD/DVD-RAM/DVD+RW After the television channels have been stored, you will see the • You will be prompted with the confi rmation message following picture(banner) each time you switch channels. “Current media : Do you want to format?”. *** ◆ Banner Elem
ページ4に含まれる内容の要旨
5. Press the REC button. Finalising a Disc Information concerning the channel being recorded is displayed on the screen and then recording begins. After you record titles onto a DVD-RW/±R disc with your Icon (● REC) is displayed on the front panel. HDD & DVD Recorder, it needs to be fi nalised before it can be played back on external devices. To stop recording 1. With the unit in Stop mode, press the MENU button. Press the STOP ( ) button to stop or fi nish a recording in progress. 2.
