ページ1に含まれる内容の要旨
User Manual
ECOR264-4X1 DVR
ECOR264-4X1 DVR
ECOR264-9X1 DVR
ECOR264-9X1 DVR
ECOR264-16X1 DVR
ECOR264-16X1 DVR
ページ2に含まれる内容の要旨
E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N ECOR264-4X1 DVR ECOR264-9X1 DVR ECOR264-16X1 DVR Instruction Manual 2010 EverFocus Electronics Corp www.everfocus.com All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form or by any means without written permission of the Everfocus Electronics Corporation. Release Date: Apr. 2010 QuickTime is a registered trademark of the Apple Computer, Inc.
ページ3に含まれる内容の要旨
Safety Precautions Refer all work related to the installation of this product to qualified service personnel or system installers. Do not block the ventilation openings or slots on the cover. Do not drop metallic parts through slots. This could permanently damage the appliance. Turn the power off immediately and contact qualified service personnel for service. Do not attempt to disassemble the appliance. To prevent electric shock, do not remove screws or covers. There
ページ4に含まれる内容の要旨
Unplug the unit from the outlet before cleaning. Do not use liquid cleaners, abrasive or aerosol cleaners. Use a damp cloth for cleaning Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards. Water and Moisture Do not use this unit near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, near a swimming pool, in an unprotected outdoor installation, or any area which is classified as a
ページ5に含まれる内容の要旨
WEEE This Product is RoHS compliant. The information in this manual was current upon publication. The manufacturer reserves the right to revise and improve his products. Therefore, all specifications are subject to change without prior notice. Manufacturer is not responsible for misprints or typographical errors. Please read this manual carefully before installing and using this unit. Be sure to keep it handy for later reference.
ページ6に含まれる内容の要旨
TABLE OF CONTENTS 1 PRODUCT OVERVIEW ..................................................................................................... 1 1.1 FEATURES ....................................................................................................................... 1 1.2 PACKAGE CONTENTS................................................................................................... 2 1.3 SPECIFICATIONS .........................................................................
ページ7に含まれる内容の要旨
3.6 PTZ .................................................................................................................................. 24 3.6.1 General PTZ control (if PTZ cameras are installed)..................................................................................24 3.6.2 Express Control of PTZ.........................................................................................................................25 3.7 LAYOUT..................................................
ページ8に含まれる内容の要旨
4.10 SYSTEM SETTING ..................................................................................................... 90 4.10.1 Date/Time..............................................................................................................................................90 4.10.2 Daylight Saving .....................................................................................................................................91 4.10.3 User ......................................
ページ9に含まれる内容の要旨
Chapter 1 1 PRODUCT OVERVIEW This new EverFocus digital video recorder is based on H.264 compression technology, resulting in increased recording capacity and improved network image transmission speed while retaining high image quality. Comprehensive features and extended event recording settings enable the almost universal application of this DVR. The ECOR264-4/ECOR264-9/ECOR264-16 DVRs permits multiple control inputs. These inputs include mouse control, front panel control, IR remote
ページ10に含まれる内容の要旨
- Remote configuration support from the built-in web interface - 10/100M Ethernet interface for remote network viewing and control - On-screen PTZ control via mouse or front panel - Support for up to 1 Hot Swappable HDD or 2 fixed internal HDD* - Built-in DVD burner* - 2 USB 2.0 ports (1 located on front panel, 1 located on back panel) for video archive and mouse usage - Multi-language support - Watermark capabilities to identify intentional modifications to exported data - 19” Rack mo
ページ11に含まれる内容の要旨
1.3 SPECIFICATIONS ECOR264X1 Channels 16 9 4 Compression Format H.264 480 NTSC /400 PAL (CIF) 270 NTSC /225 PAL (CIF) 120 NTSC /100 PAL (CIF) 240 NTSC /200 PAL 240 NTSC /200 PAL Recording Rate/Resolution 120 NTSC /100 PAL (2CIF) (2CIF) (2CIF) (Max. total)(FPS rates per camera can be set independently up to the max total rate) 120 NTSC /100 PAL (D1) 480 NTSC /400 PAL (CIF) 270 NTSC /225 PAL (CIF) 120 NTSC /100 PAL (CIF) 240 NTSC /200 PAL 240 NTSC /200 PAL Playback Rate/Resoluti
ページ12に含まれる内容の要旨
YES RS-232 Terminal connector RS-485 12VDC – Power Supply Included Power Source 353.0 x 354.8 x 70.60 mm / 13.89" x 13.96" x 3.055" Dimensions (L x W x H) 0°C~40°C / 32°F~104°F (20~80% humidity) Temperature CE, FCC, UL Certifications EverFocus, Pelco D, Pelco P, Samsung, Transparent Supported PTZ Protocols 4
ページ13に含まれる内容の要旨
1.4 FRONT PANEL Your primary interaction with your new DVR will be through the Front Panel buttons and their corresponding buttons on the included IR Remote Control. Take a moment to learn where the keys are as the remainder of the manual will refer to them often. 5 6 7 8 9 16 18 ○ ○ ○ ○ ○ ○ ○ 3 19 ○ ○ 1 ○ 20 ○ 21 ○ 22 ○ 17 ○ 23 ○ 2 4 ○ ○ 15 ○ 10 11 12 ○ ○ 13 14 ○ ○ ○ Figure 1-1 Front Panel 1) Remote Control Receiver: Receiver for IR remote control. 2) USB 2.0 (fron
ページ14に含まれる内容の要旨
10) View: Press this key to switch between 4x, PiP (Picture In Picture),full screen, 9x, 10x, 13x and 16x. Note: PIP display is not available in playback mode. 11) SEQ: Press this key to enter the auto sequential switching mode. The sequence dwell time can be set in “Display Setting” tab of the Menu. For more detail about SEQ, please see “Section 4.9.2 Display Setting-Main M/T SEQ”. 12) Display: Press this key to switch display of channels and status bar. 13) Monitor: Swit
ページ15に含まれる内容の要旨
1.5 REAR PANEL During initial setup you will be connecting your DVR to multiple input and output devices. This is done through the rear panel. 1 ○ 2 3 ○ ○ 15 ○ 13 14 ○ ○ 4 ○ 12 ○ 5 6 7 8 9 10 11 ○ ○ ○ ○ ○ ○ ○ Figure 1-2 Rear Panel 1 ○ ○ ○ ○ Video In: Connect camera’s video output or other composite video source to the video input connection. 2 ○ ○ ○ ○ eSATA: Used for external SATA HDD bay. Note: Hot-swappable model does not support eSATA. 3 ○ ○ ○ ○ Audio In: Connect
ページ16に含まれる内容の要旨
8 ○ ○ ○ ○ RS485 socket: For remote control via RS-485 keyboards and telemetry control for attached PTZ devices 9 ○ ○ ○ ○ Main: Main monitor for live and playback display and on-screen display. 10 ○ ○ Call: Call monitor output. Spot monitor for full screen live display, sequence mode and alarm ○ ○ camera switching. 11 ○ ○ ○ ○ Main VGA: Main monitor - connect a VGA monitor to the VGA output connection. VGA resolution is 800x600. 12 ○ ○ ○ ○ Alarm In: Connect up to 4 alarm inputs,
ページ17に含まれる内容の要旨
1.6 VIDEO INPUTS/OUTPUTS INSTALLATION Cameras and CCTV monitors must use copper center conductor/copper braid 75 Ohm video cable (e.g. RG-59, RG-6, RG-11) with BNC connectors. To avoid impedance mismatch and undesired loss/reflections, 50 Ohm coax cable (e.g. RG-58), or 75 ohm foil shield antenna cable and other types of coaxial cable are not compatible. All connected video sources must provide a 1 Vpp NTSC or PAL standard video signal. When converting other transmission types (twist
ページ18に含まれる内容の要旨
Alarm input with N.O. (Normal Open) contact Alarm input with N.C. (Normal Closed) contact in idle state in idle state All settings are programmed in the ALARM menu (Section 0). 1.8.2 Alarm Output Relay The relay output provides either Normally Open or Normally Closed dry contacts. Output relay in idle state 1.9 RS-485 keyboard / PTZ Installation All functions can be remote-controlled by the EKB-500 universal keyboard. Using the EEPbus protocol, digital vide
ページ19に含まれる内容の要旨
RS-485 bus serial wiring with connector boxes and connection cable Direct RS-485 bus star wiring is not supported unless using an EverFocus Model EDA997A (see below). Improper RS-485 bus star wiring An EDA997A RS-485 signal distributor may be used to use a star wiring configuration. Star wiring with RS-485 signal distributor A RS-485 distributor can also be used to increase the maximum number of devices on the bus as well as the total range. Each distributor output prov
ページ20に含まれる内容の要旨
ATTENTION: EDA997A signal distributors are unidirectional! This means that the signal only flows from the input towards the outputs. Therefore, e.g. the interconnection of several keyboards is not possible with these types of signal distributor! 1.9.2 RS-485 socket pin assignment The RS485 pin assignment is as follows: + I 1.9.3 EKB-500 connection with network patch cable For a simple, short distance installation, recorder and keyboard can be connected directly using a
