ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
SAFETY PRECAUTIONS EXPLANATION OF SYMBOLS This symbol is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying the appliance. This symbol is intended to alert the user to the presence of unprotected “dangerous voltage” within the product’s enclosure that may be strong enough to cause a risk of electric shock persons. WARNING To reduce a risk of fire or electric shock, do not expose this product to rain or moi
ページ3に含まれる内容の要旨
The bellow safety precautions must be followed. WARNING Do not use if the unit emits smoke, strange sounds is heard, or odor is emitted. Make sure the power cable is not damaged. Make sure there is no dust accumulation on the power plug or the outlet. Disassembly prohibited Do not place any foreign objects inside the unit. Do not place a container holding water or other liquids above the unit when it is connected to power. Do not allow the unit to get wet. Do not use during thunder/thund
ページ4に含まれる内容の要旨
Precautions for supplied AC Adaptor CAUTION Never disassemble or modify. Never get the adaptor wet. CAUTION Use only the supplied AC adapter. Do not connect to other appliances. Do not connect this unit with the AC adapter in areas reachable to children or where pets move freely. Never touch the AC adapter with wet hands. If the unit emits smoke, strange sounds or smells immediately remove the AC adapter from the outlet. Do not use during thunder/thunder storms. CAUTION Make
ページ5に含まれる内容の要旨
Main features H.264 Video compression TRIPLEX operation (recording, playback, and networking) Instant and convenient data backup & firmware upgrade using USB flash drive Simple user interface Individual channel setting and operation Motion detection 5
ページ6に含まれる内容の要旨
System components and Installation Requirements for installation and safety This chapter is for the requirements for safe installation and use. This kit should be installed on a flat table or in a rack. The location in which the DVR is installed in the room is very important for proper operation of the system. When the DVR is installed too closely together or the location is poorly ventilated, the DVR may not operate properly and maintenance of the DVR may be difficult. Mak
ページ7に含まれる内容の要旨
Components of DVR Package The package contains the main unit and its components as specified below. When you purchase the package, please check to ensure the components specified below are included. DVR Set Remote Control Battery1.5V (AAA x 2EA) Adaptor and Power cable Client Software CD User Guide HDD Power & SATA Cable HDD Screws Audio Cable (for 16ch) Mouse (Option) 7
ページ8に含まれる内容の要旨
Basic function of the MOUSE : Left button: SELECT function : Right button: ESC function : Double click: Go to sub menu Mounting the HARD DISK 1. Unfasten the cover of the unit. 2. Fix the supplied HDD mounting bracket to the hard disk using the supplied mounting bracket screws. 3. Connect the supplied SATA cable and power cable to the hard disk and fix the hard disk to the unit using the supplied HDD fixing screws. 8
ページ9に含まれる内容の要旨
SPECIFICATIONS ITEM 4CH 8CH 16CH Channel, Input Level 4CH, Composite 8CH, Composite 16CH, Composite Input Signal Format NTSC/PAL Video Video Loss Check Yes Main Monitor Output 1 CH BNC, 1CH VGA: Selectable Output Signal Format NTSC/PAL & VGA Input & Output 4 CH Line input & 1 CH Line output Audio Audio Codec G.711(ADPCM) Sensor Input ((NC/NO Selectable) 4 4 4 Alarm Alarm Output 1 Alarm out by Alarm, Motion, Video Loss Compression H.264 Multi-operation TRIPLEX (Playback/Record/Network) 352x240 35
ページ10に含まれる内容の要旨
Termination Yes Dynamic DNS Yes (Free DDNS) Network Network Interface 10/100 base-TX Ethernet (RJ-45) Client Software (1:1) Live, Search, Backup, PTZF Camera Control Network Web viewer (1:1) Live, Search, Backup, PTZF Camera Control Access Multi-sites Monitoring System (1:n) Live, Search, Backup, PTZF Camera Control DLS (Day Light Saving) Yes Internal Beep By Alarm, Motion, Video Loss, HDD error Features Multi-Language Yes S/W Upgrade USB Flash drive Water - mark Yes (Exclusive viewer) Power P
ページ11に含まれる内容の要旨
INDEX 1. NAME & FUNCTION ..................................................................................................... 14 1-1. Front panel ...............................................................................................................................................14 1-2. Remote control ........................................................................................................................................15 1-3. Rear panel and connection..................
ページ12に含まれる内容の要旨
2-8-3. Saving Setup of Network setup ..........................................................................................................39 2-9. Setup - CONFIG Mode.............................................................................................................................40 3. SAVING SETUP ............................................................................................................ 42 4. LIVE, SEARCH, AND PLAYBACK.............................................
ページ13に含まれる内容の要旨
8-2. Installing the network viewer .................................................................................................................56 8-3. Live monitoring mode and functions. ...................................................................................................57 8-4. Bi directional audio .................................................................................................................................59 8-5. Remote search mode and functions ..........
ページ14に含まれる内容の要旨
1. NAME & FUNCTION 1-1. Front panel SEQ: To start auto sequencing of the screen in full screen mode. (Toggle) PTZ: To control PTZ operation SETUP: To launch SETUP menu. CAPTURE: To start operations of backup in live or playback mode. SEARCH: To go to the search menu. REC: To start and stop manual recording. PLAY/PAUSE: To play or to pause the footage in playback mode. REW: To rewind the footage at 1x, 2x, 4x, and 8x speed during playback. F/REW : During playback - To move the playback p
ページ15に含まれる内容の要旨
1-2. Remote control ID: When a remote control ID number is set in DVR, press it before number. REC: To start and stop manual recording. Number: To select channel (1, 2, 3, & 4) or to enter DVR ID number. F/REW: During playback - To move the playback position 60 seconds backward. During pause - To move the playback position 1 frame backward. F/ADV: During playback - To move the playback position 60 seconds forward. During pause - To move the playback position moves 1 frame forward. REW: To
ページ16に含まれる内容の要旨
1-3. Rear panel and connection 1-3-1. Basic connections Do not power this system on before all the connections are completed. Make sure all the connections are properly. Faulty connection may result in the system being damaged. The DC plug of the AC adaptor is easy to be unplugged. Please make sure that the plug is removed. 4CH 8CH 16CH 16
ページ17に含まれる内容の要旨
Cooling fan AUDIO IN: Audio input terminal (* Use the audio cable which is provided with the 16ch dvr package) AUDIO OUT: Audio output terminal (* Use the audio cable which is provided with the 16ch dvr package) VIDEO IN: Video input terminal VIDEO OUT: Video output terminal VGA: VGA (Video Graphics Array) output terminal. Connects to the PC VGA monitor. ETHERNET: Network terminal SENSOR IN & ALARM OUT: External sensor terminal & External alarm out terminal RS-485 TERMINATION ON/OFF: T
ページ18に含まれる内容の要旨
ADSL Modem Internet IP Router or HUB NOTICE If you have a IP line with one IP address (whether it is dynamic IP or fixed IP), but you have more than one internet device (such as PC/PCs and a DVR); to use Router (It is different from a simple Network Hub); you must set up the Router to work with DVR; and you must use a network capable PC within the local Ro
ページ19に含まれる内容の要旨
---: Not operational N/O: Normally open type sensor. When magnetic sensor is closed, sensor sends a signal. N/C: Normally closed type sensor. When magnetic sensor is opened, sensor sends a signal. ALARM OUTPUT: Use Maximum current: 0.5A/125VAC, Maximum voltage: 1A/30VDC. When controlling lamp and AC operated equipment, control it using separate outside relay. During normal operation the control output contact is maintained at “Open” status, and during control output the output contact is chang
ページ20に含まれる内容の要旨
1-4-2. VGA: Select VGA to connect computer VGA monitor The general TV monitor terminal and the computer VGA monitor terminal can not be used simultaneously. 2. Setting up the DVR The following sections detail the initial setup of a DVR. 2-1. Setup – Main Screen To enter the setup menu, select MENU and SETUP on the screen using the mouse or press the SETUP button on the front panel. Then select a user type. User can select one of user types (A
