ページ1に含まれる内容の要旨
Divar MR Digital Video Recorder
Type numbers DVR-8K, DVR-16K, DVR-8L, DVR-16L
en Operation Manual_en
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Digital Video Recorder Table of contents | en 1 Table of contents 1 Safety 3 1.1 Important safety instructions 3 1.2 Safety precautions 4 1.3 Important Notices 4 2 Introduction 9 2.1 Features 9 2.2 Accessories 10 2.3 Front panel 11 2.4 Back panel 13 2.5 Remote Control 14 3 Connections and settings 17 3.1 Basic connection overview 17 3.2 Camera connections 18 3.3 Monitor connections 18 3.4 Connecting the RS-232C (COM 1) Port 18 3.5 CCTV keyboard connections 19 3.6 Network conn
ページ4に含まれる内容の要旨
2 en | Table of contents Digital Video Recorder 5.4 EXPORT 80 6 Control Center 83 6.1 PC minimum Requirements 83 6.2 Control Center installation 83 6.3 Connecting to the DVR 83 6.4 Main screen of DVR Control Center Program 86 6.5 Live Mode 88 6.6 Search mode 93 6.7 Remote Setup mode 97 6.8 Remote Export Settings 107 7 Additional programs 109 7.1 Alarm Notifi er program 109 7.2 Main Screen of Alarm Notifi er program 110 7.3 Archive Player program 112 7.4 Web Viewer program 115 8 REFERENCE 119 8.
ページ5に含まれる内容の要旨
Digital Video Recorder Safety | en 3 1 Safety 1.1 Important safety instructions Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operating the unit. 1. Cleaning - Unplug the unit from the outlet before cleaning. Follow any instructions provided with the unit. Generally, using a dry cloth for cleaning is sufficient, but a moist fluff-free cloth or leather shammy may also be used
ページ6に含まれる内容の要旨
4 en | Safety Digital Video Recorder – unit does not operate normally when the user correctly follows the operating instruc- tions. 14. Replacement parts - Be sure the service technician uses replacement parts specified by the manufacturer, or that have the same characteristics as the original parts. Unauthorized substi- tutions could void the warranty and cause fire, electrical shock, or other hazards. 15. Safety check - Safety checks should be performed upon completion of service or repa
ページ7に含まれる内容の要旨
Digital Video Recorder Safety | en 5 All-pole power switch - Incorporate an all-pole power switch, with a contact separation of at least 3 mm in each pole, into the electrical installation of the building. If it is needed to open the hous- ing for servicing and/or other activities, use this all-pole switch as the main disconnect device for switching off the voltage to the unit. Battery replacement - A lithium battery is located inside the unit enclosure. To avoid danger of explosion, rep
ページ8に含まれる内容の要旨
6 en | Safety Digital Video Recorder Moving - Disconnect the power before moving the unit. Move the unit with care. Excessive force or shock may damage the unit and the hard disk drives. Outdoor signals - The installation for outdoor signals, especially regarding clearance from power and lightning conductors and transient protection, must be in accordance with NEC725 and NEC800 (CEC Rule 16-224 and CEC Section 60). Permanently connected equipment - Incorporate a readily accessible disconnec
ページ9に含まれる内容の要旨
Digital Video Recorder Safety | en 7 Trademarks All hardware and software product names used in this document are likely to be registered trade- marks and must be treated accordingly. NOTICE! This operation manual has been compiled with great care and the information it contains has been thoroughly verified. The text was complete and correct at the time of printing. The ongoing development of the products may mean that the content of the user guide can change without notice. Bosch Securi
ページ10に含まれる内容の要旨
8 en | Safety Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
ページ11に含まれる内容の要旨
Digital Video Recorder Introduction | en 9 2 Introduction 2.1 Features • Stable embedded operating system. • Small fi le sizes with MPEG-4 compression. • Internal storage capacity to 2TB. • NTSC and PAL selectable video format. • Full realtime recording: - Up to 480IPS@352 X 240: DVR-16K, DVR-16L NTSC - Up to 400IPS@352 X 288: DVR-16K, DVR-16L PAL - Up to 240IPS@352 X 240: DVR-8K, DVR-8L NTSC - Up to 200IPS@352 X 288: DVR-8K, DVR-8L PAL • Various recording resolutions and quality level
ページ12に含まれる内容の要旨
10 en | Introduction Digital Video Recorder • Covert camera protection. • User management (User level control). • PTZ Control: - For more details see "8.2.4 Supported PTZ camera list". - Dome camera telemetry control (Dome OSD control). Note: Model DVR-16L (16 Channel) is used for the description, operation and details provided in this operation manual. 2.2 Accessories Remote Control AAA Type Batteries for Remote Rack Mount Bracket Control Mouse Divar MR PC software Screws for rack mount br
ページ13に含まれる内容の要旨
Digital Video Recorder Introduction | en 11 2.3 Front panel DVR-16K / DVR-16L ab c d ef gh i j k l DVR-8K / DVR-8L ab c d ef gh i j k l Figure 2.2 Front panel a Arrow Buttons (b B v V): Select or move between the menu options. (ENTER): Confi rms menu selections. b Function Buttons : Displays the setup menu. : Display the monitor A control menu to set the screen mode to full, 4, 6, 8, 9 or 16 screens. Set the video output signal to VGA mode. : Display the monitor B control menu. Set the
ページ14に含まれる内容の要旨
12 en | Introduction Digital Video Recorder c Disc Tray (DVR-8L and DVR-16L only) Insert a disc here. d Channel Buttons You can input a number with the channel buttons. You can also use the channel buttons for sub-function with ALT button (The COPY, IRIS +, SET, CLEAR, MOVE and TOUR buttons of 8 channel DVR are used for subfunction without ALT button.). • The LED in the button indicates the status as follows: - Off: The current status is for live mode. - Red: Recording mode. Blinks when an
ページ15に含まれる内容の要旨
Digital Video Recorder Introduction | en 13 2.4 Back panel DVR-16K / DVR-16L ab c de f g h i j kflm n o DVR-8K / DVR-8L ab c de f g h i j k lm n o Figure 2.3 Back panel a VIDEO INPUT: Connect the camera’s video output to these BNC connectors. b LOOP OUT: The signal from VIDEO INPUT connector is looped out to this connector. c Power Cord Inlet (AC IN): Connect the power plug. d AUDIO OUT: Connect the audio input signal of an external device. e BIPHASE: Connect a pan/tilt/zoom control unit vi
ページ16に含まれる内容の要旨
14 en | Introduction Digital Video Recorder m MON A (BNC Type Connector): Connect to main monitor or display device. n VGA: Connect a VGA monitor. o USB Ports: Connect optional extension USB devices (e.g. mouse, memory stick). 2.5 Remote Control Figure 2.4 Remote control. • LOCK: Displays the lock menu to change user type or disable system operation. • ACK: Cancels alarm activation and returns the system to the condition before the alarm was activated. • : Display the monitor A control me
ページ17に含まれる内容の要旨
Digital Video Recorder Introduction | en 15 • ENTER: Confi rms menu selections or go to full screen of a selected camera in multiscreen. Pressing this key again to return from full screen to multiscreen. • COPY: Copies the recorded data to an external device. • SEARCH: Displays the search menu. • MARK: Sets the mark point for recording search. You can set the mark point during the single channel playback of recorded data. • PAUSE (X): Pauses playback. • STOP(x): Stops playback. • REC
ページ18に含まれる内容の要旨
16 en | Introduction Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
ページ19に含まれる内容の要旨
Digital Video Recorder Connections and settings | en 17 3 Connections and settings Precautions • There are various ways to connect the unit, depending on the camera and other equipment. Please refer to the camera manual or the manuals for other devices as necessary for additional connection information. • Be sure to switch off the camera before installation and connection. • Default the main monitor (MON A) will start up in VGA mode. See section 3.12 for selection of the main monitor
ページ20に含まれる内容の要旨
18 en | Connections and settings Digital Video Recorder a Connect the cameras to the BNC loop-through camera inputs (automatically terminated). b Connect the Monitor, DVR, VCR, or others to the video out BNC. c Connect the power cord to the unit. d Connect an audio amplifi er. e Connect a pan/tilt/zoom control unit via the supplied 15-pole D-type connector board. f Connect up to 16 (alarm) inputs or connect up to 8 alarm output relays via the supplied 25-pin D-type connector board. g Connect
