ページ1に含まれる内容の要旨
®
AVerMedia
+
AVerDiGi EB1304 MPEG4
Operation Manual
ページ2に含まれる内容の要旨
FCC NOTICE (Class A) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Federal Communications Commission Statement NOTE- This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
ページ3に含まれる内容の要旨
WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION IF THERE IS ANY DAMAGE, SHORTAGE OR INAPPROPRIATE ITEM IN THE PACKAGE, PLEASE CONTACT WITH YOUR LOCAL DEALER. WARRANTY VOID FOR ANY UNAUTHORIZED PRODUCT MODIFICATION
ページ4に含まれる内容の要旨
Table of Contents Chapter 1 Introduction......................................................................1 1.1 Package Content........................................................................................2 1.2 Features and Specifications.......................................................................2 1.3 Front Panel ................................................................................................3 1.4 Back Panel..........................................
ページ5に含まれる内容の要旨
Chapter 1 Introduction + EB1304 MPEG4 is a 4-channel stand-alone DVR unit that provides real-time monitoring and digital recording of surveillance video. Up to four video cameras and four sensor devices can be hooked up to this DVR unit. It is also equipped with an output relay that allows connection of an alarm device. Surveillance, digital recording and playback are controlled through the front panel buttons. With the On-Screen-Display (OSD) menu, user can customize video recording sett
ページ6に含まれる内容の要旨
1.1 Package Content (1) (2) (3) (5) (4) (6) (7) (8) + (1) AVerDiGi EB1304 MPEG4 unit (2) Remote Control (batteries included) (3) Quick Installation Guide (4) Power Cord * The power cord varies depending on the standard power outlet of the country where it is sold. (5) Power Adapter (6) DVR accessories (including 4 screws) (7) Software CD (User Manual included) (8) USB Cable 1.2 Features and Specifications Non-PC stand-alone security dig
ページ7に含まれる内容の要旨
MPEG4 video compression Auto-detect NTSC or PAL video system Supports 1 hard disk drive (not included) Full-screen resolution: Display: 720 x 480 (NTSC), 720 x 576 (PAL) Recording: 720 x 480 (NTSC), 720 x 576 (PAL) Display and recording frame rate: D1 mode: 60/50fps(NTSC/PAL) CIF mode: 120/100 fps (NTSC/PAL) Scheduled recording (00:00~23:00 set by hour ) Search for recorded videos by date/time/event Input/Output: 4 sensor inputs and 1 relay output control Multiple
ページ8に含まれる内容の要旨
1.4 Back Panel Name Function (1) Audio Out : Output the audio signal to a speaker (2) Audio In : Input the audio signal from a microphone or audio output device. The audio is embedded with channel 1 (3) CH1 : Input the video camera signal and display it on channel 1 (4) CH2 : Input the video camera signal and display it on channel 2 (5) CH3 : Input the video camera signal and display it on channel 3 (6) CH4 : Input the video camera signal and display it on channel 4 (7) Video Out
ページ9に含まれる内容の要旨
Follow the illustrated instructions below to install the hard disk: 1. Loosen all screws 2. Push the cover backward and lift 3. Loosen the hard disk rack 4 screws 4. Secure the brackets on the hard disk 5. Connect the end of the IDE cable 6. Secure the hard disk inside the unit and the power connector to the hard then replace unit cover disk 5
ページ10に含まれる内容の要旨
7. Push the cover forward 8. Secure the cover 9. You may now connect all the cables. When the power is connected, the Power LED light turns on 6
ページ11に含まれる内容の要旨
1.5.2 Connecting Devices The back panel of the DVR unit, you can connect up to 4 video cameras, 4 sensor devices, 1 alarm device and output video to a TV or CRT/LCD monitor. Connecting the unit to a PC, through USB connection, the bundled software enables you to transfer, playback and segment the video. Follow the illustration below to make the connection: Microphone CRT/LCD Monitor - The DVR unit support 2 video output ports and you can only select ONE to output the video either from
ページ12に含まれる内容の要旨
1.5.3 Connecting the Sensor/Relay device The Sensor and Alarm ports enable you to connect (4) sensor inputs and (1) relay outputs. Just connect the external sensor and relay pin directly to the pinhole. Check the table below and locate which pinhole is assigned to sensor input and relay output. 1.5.3.1 I/O Card Sensor and Relay pinhole allocation: The signal from the sensor (i.e., infrared sensors, smoke detectors, proximity sensors, door sensors, etc.) is being transmitted to the u
ページ13に含まれる内容の要旨
+ Chapter 2 Operating the EB1304 MPEG4 + 2.1 Using the EB1304 MPEG4 for the First Time Upon connecting the power, the unit automatically detects the status of the hard + disk. The hard disk must be formatted before you can use it with EB1304 MPEG4 . If you are prompt to format the hard disk, press (select) for YES to format the hard disk and (menu) for NO to remain unchanged. HARD DISKS INFORMATION VERSION 1 . 2. 10 HDD CHECKING . . . HDD SIZE 76GB 509MB HDD FORMA
ページ14に含まれる内容の要旨
Full Screen Preview 4-Channel Preview When you are in full screen preview, press the following buttons on the remote control to switch to different channel, or preview all 4 channels: CH1: Camera1 QUAD: 4-Channel CH2: Camera 2 CH3: Camera 3 CH4: Camera 4 2.3 Playback the Video If the unit is recording the video, you may have to stop video recording in order to do video playback. To stop video recording, press . 2.3.1 To Playback Video SEARCH METHOD 1. Press TIME SEARC
ページ15に含まれる内容の要旨
time. Then press or again to make the selection. 3. To start video playback, the time in second must be set. Use the or buttons to move the selection to the left most. Use the and or and buttons and select the time in second. Then press or . EVENT LIST (search by condition): EVENT LIST S 2006 / 05 / 03 13 : 26 : 34 13 : 26 : 50 1. Use the and or and A 2006 / 05 / 03 13 : 00 : 01 13 : 16 : 46 A 2006 / 05 / 03 12 : 00 : 01 13 : 00 : 01 11 : 48 : 37 12 : 00 : 00 B 2006 / 05 /
ページ16に含まれる内容の要旨
Chapter 3 OSD Navigation Tree MAIN MENU MAIN MENU RECORD SCHEDULE RECORD SCHEDULE RECORD SCHEDULE RECORD SCHEDULE CAMERA SELECT CAMERA SELECT 1 1 2 2 3 3 4 4 00 : 00 - 01 : 00 00 : 00 - 01 : 00 ALWAYS REC ALWAYS REC 13 : 00 - 14 : 00 13 : 00 - 14 : 00 ALWAYS REC ALWAYS REC RECORD SELECT RECORD SELECT 1 1 2 2 3 3 4 4 01 : 00 - 02 : 00 01 : 00 - 02 : 00 ALWAYS REC ALWAYS REC 14 : 00 - 15 : 00 14 : 00 - 15 : 00 ALWAYS REC ALWAYS REC RECORD MODE RECORD MODE D1 02 : 00 - 03 :
ページ17に含まれる内容の要旨
3.1 Remote Control Function Use the Remote control to operate the OSD menu on surveillance screen. (11) (12) (1) (2) (3) (15) (13) (4) (14) (5) (8) (7) (10) (6) (9) Button Function To enter the OSD Main menu / Exit from the main menu or (1) sub-menu display (2) To go up and down and select the items in the menu list or change the settings (3) (4) Make a selection / Enter sub-menu (5) To go up and down and select the items in the menu list or change the settings (6) (7)
ページ18に含まれる内容の要旨
3.2 Menu Function If the unit is currently recording the video, user may have to stop video recording to change the settings. Use remote control to navigate in the OSD menu. The red frame turns yellow when you are making a selection. OSD MENU Description MAIN MENU CAMERA SELECT : CAMERA SELECT 1 2 3 4 RECORD SELECT 1 2 3 4 Enable/disable the channel number to display the video RECORD MODE D1 on the surveillance screen VIDEO FORMAT MPEG4 RECORD FRAMERATE 10 RECORD SELECT
ページ19に含まれる内容の要旨
OSD MENU Description RECORD SCHEDULE RECORD SCHEDULE: 00 : 00 - 01 : 00 ALWAYS REC 01 : 00 - 02 : 00 ALWAYS REC By default, in 24 hours, the recording schedule is set to 02 : 00 - 03 : 00 ALWAYS REC always record every hour. Refer to the table below to 03 : 00 - 04 : 00 ALWAYS REC 04 : 00 - 05 : 00 ALWAYS REC customize the recoding condition 05 : 00 - 06 : 00 ALWAYS REC 06 : 00 - 07 : 00 ALWAYS REC Condition Description 07 : 00 - 08 : 00 ALWAYS REC 08 : 00 - 09 : 00 ALWAYS REC 09 : 00
ページ20に含まれる内容の要旨
OSD MENU Description SUBMENU PASSWORD SETUP : PASSWORD CHANGE VIDEO ADJUSTMENT Enable/disable full system password protection. This DATE 2006 / 04 / 20 would prevent unauthorized user to stop video TIME 17 : 54 : 50 AUTO RECORD ON recording, change system settings and formatting the AUTO SCAN ON hard disk PASSWORD SETUP NO AUDIO RECORD ON AUDIO RECORD : AUDIO MUTE OFF AUDIO SYSTEM PAL COLOR STABILITY OFF Enable/disable audio recording. To record sound, make sure the m
