ページ1に含まれる内容の要旨
PC Pro Series
User Manual
ページ2に含まれる内容の要旨
P/N: 300AC2FA-CPM MADE IN TAIWAN
ページ3に含まれる内容の要旨
FCC NOTICE (Class A) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Federal Communications Commission Statement NOTE- This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These lim
ページ4に含まれる内容の要旨
THE MARK OF CROSSED-OUT WHEELED BIN INDICATES THAT THIS PRODUCT MUST NOT BE DISPOSED OF WITH YOUR OTHER HOUSEHOLD WASTE. INSTEAD, YOU NEED TO DISPOSE OF THE WASTE EQUIPMENT BY HANDING IT OVER TO A DESIGNATED COLLECTION POINT FOR THE RECYCLING OF WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT. FOR MORE INFORMATION ABOUT WHERE TO DROP OFF YOUR WASTE EQUIPMENT FOR RECYCLING, PLEASE CONTACT YOUR HOUSEHOLD WASTE DISPOSAL SERVICE OR THE SHOP WHERE YOU PURCHASED THE PRODUCT. Battery Safety Inform
ページ5に含まれる内容の要旨
WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION IF THERE IS ANY DAMAGE, SHORTAGE OR INAPPROPRIATE ITEM IN THE PACKAGE, PLEASE CONTACT WITH YOUR LOCAL DEALER. WARRANTY VOID FOR ANY UNAUTHORIZED PRODUCT MODIFICATION. Manual Conventions The following conventions are used throughout this manual Caution symbol is intended to alert the user of the important installation and operating instructions. Fail to comply may damage
ページ6に含まれる内容の要旨
TABLE OF CONTENTS Chapter 1 Introduction.......................................................................1 1.1 Package Contents..................................................................................1 1.2 Specification...........................................................................................2 1.3 Software Features..................................................................................3 1.4 Front Panel............................................
ページ7に含まれる内容の要旨
4.5.1 Set schedule at specific portion of time ..................................59 4.6 Backup Setting.....................................................................................59 4.6.1 To Backup file..........................................................................59 4.6.2 Setup Quick Backup................................................................60 4.7 Sensor Setting......................................................................................61 4.7.1 To
ページ8に含まれる内容の要旨
Chapter 8 Image Verification.........................................................105 8.1 To Run the ImageVerification program...............................................105 Chapter 9 iEnhance........................................................................106 9.1 To Use iStable ....................................................................................108 Chapter 10 Web Tools......................................................................109 10.1 Dispatch Serv
ページ9に含まれる内容の要旨
Chapter 1 Introduction The SPECO PC Pro is a professional series of standalone DVR units that provide up to 16 channels of hybrid and real-time monitoring and digital recording of surveillance video. It can connect to 4 sensors and relays and also provide up to 16 audio inputs. No software and hardware installation required. Simply connect the cables and start the video surveillance process. Through the USB port, user can backup the recording video and playback within the bundled software
ページ10に含まれる内容の要旨
1.2 Specification PC Pro Series Model PC Pro 16 PC Pro 8 Operating system WinXP embedded Video input 16 8 Video loop output 16 8 Display rate(NTSC/PAL) 480/400 fps 240/200 fps Recording frame rate(CIF) 480 (FPS@352*240) 240 (FPS@352*240) Audio input 16 8 Sensor/Relay 4/4 4/4 DVD-RW Yes Yes Removable HDD tray 1 HDD tray(support up to 4 HDD) DOM 2 GB H/W accesorry Remote controller Ethernet RJ-45, 10/100/1000 Mbps USB 2.0 Front 2 ports, Rear 4 ports LCD Display Temperature/ Sys
ページ11に含まれる内容の要旨
1.3 Software Features Continuous Recording Smart Recording Motion Recording Voice detection Recording Alarm Recording Recording Modes Manual Recording All modes can be triggered by schedule i De-interlace Optimize for dynamic or static camera scenes Options Support Dual Monitor environment for independent preview and Dual-monitor playback or EMAP output PTZ control/ channel select/ split select/ playback control/ mode Operation via select front panel Motion Detection
ページ12に含まれる内容の要旨
Make a phone call Send files to FTP SMS and MMS PTZ preset point tracking Alarm SOP wizard Enlarge camera view (Full screen) Central Central Management System(CMS) Management IE browser Remote Console Remote Access Smart phone viewer PDA viewer Dispatch Server Share transmission loading; enable more clients remote access and high-speed data transmission PDA Viewer 4-cam view, full screen and live audio Smart phone Supports Symbian and Windows smart phone system/ support
ページ13に含まれる内容の要旨
1.4 Front Panel (4) (7) (8) (9)(10)(11)(12)(13) (5) (19) (3) (20) (2) (1) (6) (14) (15)(16) (17)(18) Name Function 2 x USB 2.0 ports for connecting any USB interface devices, ex: (1) USB 2.0 port USB pen drive, external hard disk, keyboard, mouse…and so on. (2) IR Sensor Receive signal from the remote control to operate the unit (3) IR Sensor To connect extended IR sensor cable (4) System power button A functional key for multiple system control Press to enable multiple function
ページ14に含まれる内容の要旨
Name Function + : To freeze the live preview video screen. To 9 unfreeze press again. User 9 can snapshot the freeze screen while freezing. + : To backup recorded video file to pen 10 drive(see Chapter 4.6.2) + : Allow user to set a video segment from A 11 to B point and play on the surveillance screen until user stop. 1. Switch to Playback mode 2. Press to enter multiple function mode 3. During the playback, press to set the A point of 11 video segment. User will see a t
ページ15に含まれる内容の要旨
Name Function - With button can switch to different screen display modes and ~ 1 (6) Number button enable auto scan function - To call out 1~ 8 map figures in E-map 12 mode Display DVR system status such as temperature and opearate (7) LCD Display status (8) Confirm or make a selection (9) To start recording video (10) To enable network connection (11) To reset alarm status (12) Cancel a selection PTZ control button (13) To move PTZ camera lens to left, right, up an
ページ16に含まれる内容の要旨
Name Function (18) Auto Pan To enable auto pan function system status indicators: : System power indicator. Indicate running state of system. Lights when the system is running. : Removable hard disk indicator. Indicate running state of (19) Status LEDs the hard disk. Lights when the HDD is running : Recording status indicator. Lights when the system is recording. : Network status indicator. Lights when the system network connection is enabled. Playback control button in playb
ページ17に含まれる内容の要旨
1.4.1 The Front Panel Control Buttons in Guest Mode When user uses Guest account to operate DVR server, the front panel control buttons of DVR are limited to preview and playback function only. The following table lists the control buttons that are available while in Guest mode. In the Guest mode, user only can use remote controller and front panel control buttons i to operate DVR server. Mode Function A functional key for multiple system control Press to enable multiple function
ページ18に含まれる内容の要旨
1.5 Back Panel 1.5.1 8 Channels (4) (2) (3) + - + - + - + - + - + - + - + - 1234 5678 AUDIO IN TV OUT 1 2 3 4 5 6 7 8 (1) 1 2 3 4 5 6 7 8 DUAL-VGA OUT 2 1 G1GGG 2 3412 1 N/ 2 N/334 N/ 4 N/ A A A A SENSOR IN RELAY OUT (10) (9) (8) (7) (6) (5) Name Function (1) Video Loop Out Output the video signal to a CCTV monitor. Only output one channel signal at a time. (2) CH1~8 Input the video camera signal and display it on channel 1~ 8 (3) Audio In Input the audio signal from a microphone or
ページ19に含まれる内容の要旨
1.5.2 16 Channels (1) (2) (3) + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - TV OUT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 AUDIO IN 1 2 3 4 5 6 7 8 VIDEO IN 9 10 11 12 13 14 15 16 DUAL-VGA OUT 2 1 VIDEO LOOP OUT 2 1 N N N N G123412 GG G 1 /A 2 /A334 /A 4 /A SENSOR IN RELAY OUT (10) (9) (8) (7) (6) (5) (4) Name Function (1) CH1~16 Input the video camera signal and display it on channel 1~ 16 (2) Audio In Input the audio signal from a microphone or audio output device. S
ページ20に含まれる内容の要旨
Chapter 2 Hardware Installation 2.1 Connecting Device The DVR unit can connect up to 16 video cameras, 4 sensor devices, 4 relay devices and output video to a TV or CRT/LCD monitor. Connecting the unit to a DVD-RW/ external hard disk through USB connection, the bundled software enables you to transfer and back up the recorded video. Also, the bundled software can playback and segment the backup recorded video. Follow the illustration below to make the connection: Microphone Camera 1 ~ 1
