ページ1に含まれる内容の要旨
DVR-X1
Operating Instructions
Single Input DVR System
Speco Technologies
200 New Highway
Amityville. NY 11701
Tel. 631-957-8700
Fax. 631-957-9142
www. specotech.com
ページ2に含まれる内容の要旨
DVR-X1 User Manual Contents 1. Features………………………………………………………. 2 2. Specification…………………………………………………... 3 3. Rear Panel Description……………………………………… 4 4. Function Key Description……………………………………. 5 5. Playback Mode……………………………………………….. 6 5.1 Play Mode……………………………………................ 6 5.2 Search……………………………………..................... 7 6. Recording Mode………………………………………………8 7. Menu Set Up………………………………………………….. 9 7.1 Enter Main Menu……………………………………..... 9 7.2 System St
ページ3に含まれる内容の要旨
DVR-X1 User Manual 1. Features Automatically detects NTSC/PAL. (Please connect the video source before powering the DVR-X1.) Digital recording replaces conventional time-lapse recorder. Video compression MJPEG. Motion detection recording. Various recording modes - continuous, schedule, motion detection and external sensor modes. One external alarm input and one output. Automatic recording after alarm is triggered. 1 channel audio recording. Quic
ページ4に含まれる内容の要旨
DVR-X1 User Manual 2. Specification Operation Mode Front panel, OSD Recording Speed 720 x 240 : 1–10 Frames/sec (adjustable) 360 x 240 : 1–15 Frames/sec (adjustable) Recording Mode Manual Schedule Motion Detection (Sensitivity Adjustable) External Sensor Audio Recording / 1 ch Live Audio Compression MJPEG Video Input 1 channel BNC (NTSC/PAL) Video Output Composite video (BNC) x 2 Playback Function Playback — forward、reverse Fast forward Fast reverse
ページ5に含まれる内容の要旨
DVR-X1 User Manual 3. Installation Rear panel Power Supply： 12V DC，4A. VIDEO IN： Image signal input, connected to the video source. VIDEO OUT：“VIDEO OUT” is connected to monitor ”VIDEO IN”. VCR OUT：“VCR OUT” can be connected to the ”VIDEO IN” of a VCR. AUDIO IN：For a MIC connection. AUDIO OUT：Line Level for live and Audio playback. SENSOR/ALARM： There is a DB9 connector on the right side of the rear panel, which is connected to any external sensors and ala
ページ6に含まれる内容の要旨
DVR-X1 User Manual 4. Function Key Description Front Panel MENU：Menu set up ENTER：Enter to sub-menu or editing procedure. EXIT：Press this function key to return to the previous selection. ←：Move to the left (up) item during editing procedure. →：Move to the right (down) item during editing procedure. ＋：Next value. －：Previous value. SEARCH：Under normal mode, press this key to display log file lists. REC< >：Under normal mode, press this key to enter record m
ページ7に含まれる内容の要旨
DVR-X1 User Manual 6
ページ8に含まれる内容の要旨
DVR-X1 User Manual 5. Playback Mode 5.1 Play Mode In normal or sequence mode, press key to enter the playback mode, or press key to enter the log files list (including: date, time), then press key or key to display image. Quick Image Search： Press key, for quick fast forward search image (x2, x4). Press key, for quick fast reverse image (x1, x2, x4). Press key once again to return to normal speed. Skip
ページ9に含まれる内容の要旨
DVR-X1 User Manual 5.2 SEARCH According to date and time to perform searching function, press key to display the image below： Use <←>、<→> key to move the cursor (Highlight) up and down to the area to be modified, press <＋>、<－> key to make changes. Year、Month： Enter the year / month by pressing <＋> or <－> key to select the year / month. Day、Hour、Minute： Enter the above setting by pressing <＋> and <－> key or < > and < > key.
ページ10に含まれる内容の要旨
DVR-X1 User Manual 9
ページ11に含まれる内容の要旨
DVR-X1 User Manual 6. Recording Mode Manual Recording：Under Normal mode, pressing the key will start recording and pressing the key will stop manual recording. Note: It takes 5 seconds to stop manual recording. For other functions including: Schedule Recording, Motion Detection Recording, Sensor Input Recording, please refer to Menu Setup. During recording, all items under the Main Menu may not be accessed to make adjustments, except System
ページ12に含まれる内容の要旨
DVR-X1 User Manual 7. Menu Set Up 7.1 Enter Main Menu Press the
