ページ1に含まれる内容の要旨
QSD2014 User’s Manual
Rev031309
ページ2に含まれる内容の要旨
INDEX Chapter 1 ： DVR Features .................................................................................................................................... 1 Chapter 2 ：Layout .................................................................................................................................................. 2 2.1 Front Panel ..................................................................................................................................................
ページ3に含まれる内容の要旨
Chapter 7 ：Playback ............................................................................................................................................ 14 7.1 Playback Control ......................................................................................................................................... 14 Chapter 8 ： USB Program .................................................................................................................................. 15 8.1
ページ4に含まれる内容の要旨
QSD2014 User’s Manual Chapter 1 ： DVR Features DVR Features MPEG4 Compression; Video Input / Output ：4-CH Video Input- 1-CH Video Output; Good Image quality, High definition; System Format: NTSC/PAL ； Uses SOC chip with high stability; Linux operation System; Supports Multiple recording Modes: Continuous, Motion Detection, Time Schedule Supports Event List and Search/Playback by specified time; Supports Hidden Channel and Playback display; Missing Video s
ページ5に含まれる内容の要旨
QSD2014 User’s Manual Chapter 2 ：Layout IR Receiver 2.1 Front Panel Stop #10 Stop recording / playing CH1 #1 Channel #1 REC #11 CH2 #2 Channel #2 Record CH3 #3 Channel #3 Menu/Esc #12 Enter / exit setup menu CH4 #4 Channel #4 SEL/Edit #13 Select / modify item Up #14 Quad #5 Quad View Move up REW #6 Down #15 Rewind/Move Left Move down Pause #7 PWR #16 Pause Power indicator LED Play #8 Hard drive indicator HDD #17 Play recorded video FWD #9
ページ6に含まれる内容の要旨
QSD2014 User’s Manual 2.3 Remote Control 1-9 Channel Select and numbers 1-9 0 Number ALL Display all Channels Menu Enter or Exit Menu Move Up ▲ ▼ Move Down SEL Select /Modify Item Rewind/Move Left Fast Forward Move Left Play Recording/Move Right ● Record Pause Stop Recording/Playback ■ Audio Audio Input/Output Mute Mute Audio 3
ページ7に含まれる内容の要旨
QSD2014 User’s Manual Chapter 3 ： DVR Installation 3.1 Hard Disk Installation Notice: Don’t take out the HDD when DVR is running. (1) Remove the top cover carefully; (2) Connect the power cord and data cable to hard drive; (3) Replace the top cover; 3.2 Connecting Camera and Monitor Attach the Camera cable to the DVR’s BNC video inputs, and DVR’s video output signal to Monitor’s video input jack respectively (refer to Chapter-2.2 Rear Panel shown) 3.3 Connecting Power Supply
ページ8に含まれる内容の要旨
QSD2014 User’s Manual Chapter 4 ：Starting the DVR 4.1 Firmware version After turning on the unit, DVR will boot-up and display the current version and release date of the DVR firmware. V2.X V-EN-BG 2008.XX.XX 4.2 Detecting Installed Hard Drive During start up, DVR will automatically detect the installed hard drive and show the hard drive MASTER [MAXTOR STM3250310A] information. SLAVE…… 4.3 Format Hard Drive When detecting a new
ページ9に含まれる内容の要旨
QSD2014 User’s Manual Chapter 5 ： DVR Menu System 5.1 Browsing the Main Menu When start up is finished, please press [MENU] to MAIN MENU enter the Main Menu. CAMERA SETUP RECORD SETUP RECORD FRAMERATE VIDEO QUALITY HIGH RECORD SCHEDULE SENSOR SETUP HARD DRIVE SETUP MISCELLANEOUS SETUP RESET MENU ( ) MOVE (SEL) SELECT (MENU)EXIT 5.2 Menu Directory Camera Setup Record Setup Record Framerate Change Password Set Time Video Quali
ページ10に含まれる内容の要旨
QSD2014 User’s Manual Note ：If a channel is disabled in Channel Setup, DVR will not record or set frame rate. 5.4 Record Setup Record Setup allows you to set up recording channels. 1 ON 2 NO Press [▲ ， ▼ ， ◄◄ and ►►] to select a channel, and then Record Setup press [SEL] to change the setting to on or off. If a channel is disabled in Camera Setup, it will not be recorded, and the characters “NOCAM” will be displayed 3 ON
ページ11に含まれる内容の要旨
QSD2014 User’s Manual 5.7 Record Schedule Setting the Record Schedule allows you to customize the type of recording you want to use depending on the time of day. The time line indicates 24 hours of a day based on Record Schedule AM/PM (0=12). AM PM Press [▲ ，▼ ，◄◄ and ►►] buttons to select a 0… 3… 6… 9… 0… 3…. 6… 9… time point, press [SEL] to modify the recording mode. NO-RECORD NORMAL-RECORD S SENSOR -RECORD
ページ12に含まれる内容の要旨
QSD2014 User’s Manual Area Selection ：Press [▲ ，▼ ，◄◄ and ►►] buttons to select a block and then press [SEL] button to set the block to detect motion. The area is detectable when it is clear, the area is not detectable when it is covered by shadow. Press “Stop” button to disable all areas, and press “Quad” button to select all areas. 5.10 Hard Drive Setup OVERWRITE ENABLED ： Hard Drive Setup ON: System overwrites oldest files when hard drive OVERWRITE ENABL
ページ13に含まれる内容の要旨
QSD2014 User’s Manual 5.12 Miscellaneous Setup – Set Time The system date and time format is YYYY/MM/DD and HH:MM:SS. SET TIME Press [◄◄] or [►►] buttons to select a data, press [SEL] button to modify the data, and press [MENU] button to save 2008/11/11 17:50:01 and return to previous menu. ( ) MOVE (SEL) SELECT (MENU) ESC 5.13 Miscellaneous Setup – Hidden Channel The system provides a function to hide a channel Miscellaneous Setup
ページ14に含まれる内容の要旨
QSD2014 User’s Manual 5.15 Miscellaneous Setup – Password Enable Miscellaneous Setup When Password Enable is set to “on”, the password will be required and must be entered CHANGE PASSWORD SET TIME correctly; otherwise, you will not be able to enter the [OFF] HIDDEN CHANNEL system. [ CH1 ] IMAGE PARAMETERS [ OFF] Entering the password will not be required if you PASSWORD ENABLE [ ON ] KEYPAD TONES set to “off” (except of formatting hard drive and
ページ15に含まれる内容の要旨
QSD2014 User’s Manual 5.19 RESET MENU System allows you to reset all your settings to the DVR factory default. You need to enter your password to reset the menu. 5.20 NTSC/PAL Output Select Change the jumper JS1 to select NTSC or PAL video output format shown on the silkscreen shown in the picture on the left. The picture shows the setting for PAL, move the jumper to the right side for NTSC Chapter 6 ：Record 6.1 Starting Recording Press [●REC
ページ16に含まれる内容の要旨
QSD2014 User’s Manual [●] ：Indicates that the channel is being recorded. [A-REC] ：Indicates the current record schedule is set to NORMAL-RECORD mode. [S-REC] ：Indicates the current record schedule is set to SENSOR-RECORD mode. [N-REC] ：Indicates the current record schedule is set to NO-RECORD mode. [39%] ：Indicates the percentage of hard disk space used. [M] ：HDD info ([M] MASTER HDD ；[S] SLAVE HDD). 6.2 Audio Recording [ ] ：indicates this video channel is assigned an audio po
ページ17に含まれる内容の要旨
QSD2014 User’s Manual Chapter 7 ：Playback 7.1 Playback Control Press the [►] PLAY button to go into PLAYBACK mode. The newest recorded event will be played. Press the [MENU] button in Playback SEACH VIDEO mode ， the system will list all the recorded DISK: MASTER SLAVE [NONE] events. The latest record will be on top of the 08/09/19 11:16:31 - 08/09/19 15:05:48 TYPE: EVENT TIME list. Press the ［▲UP ］or [▼DOWN ］ buttons PLAY ： EVENT LIST 00006
ページ18に含まれる内容の要旨
QSD2014 User’s Manual Chapter 8 ： USB Program 8.1 Software Installation Insert software CD to your CD-ROM drive; Open CD directory; Run “Installation” program; Follow the setup wizard to finish the installation. 8.2 Program Interface Button functions ： NOTE: Since this DVR does not support PTZ cameras the functions marked as 1 and 2 will not work. 1. PTZ Control(NO Function) 11. Convert Streams to AVI file 12. Fast Rewind 60s 2 Z i Z
ページ19に含まれる内容の要旨
QSD2014 User’s Manual 10. Capture Image 20. Audio Slider 8.3 Program Running 8.3.1 HDD Play Mode System will detect HDD automatically when you connect DVR to your PC with USB cable. An icon “ ” will appear in the system tray (right bottom corner of the screen). After seeing this icon, double-click the “ ” icon on your desktop to run the program. Note: If you do not strictly follow above-mentioned steps, the program may fail to read recorded files. Press the “ ” button to open the video
ページ20に含まれる内容の要旨
QSD2014 User’s Manual Press the “ ” button to play video. 8.3.2 FILE Play Mode (Only when you have saved files to your PC.) Press the “ ” button to open a folder, select the file which you want to Play and double click to play video. 17
