ページ1に含まれる内容の要旨
4/16-Channel
H.264 Digital Video Recorder
DVR-470
DVR-1670
USER’S MANUAL
Page 1
ページ2に含まれる内容の要旨
Copyright Copyright © 2007 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET. PLANET makes no representations or warranties, either expressed or implied, with respect to the contents hereo
ページ3に含まれる内容の要旨
Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20 cm (8 inches) during normal operation. Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid
ページ4に含まれる内容の要旨
Content Chapter1 Product Introduction..................................................................................................6 1.1 Summary ...................................................................................................................6 1.2 Features .....................................................................................................................6 Chapter2 Installation.............................................................................
ページ5に含まれる内容の要旨
5.18 Transaction Information..........................................................................................76 Chapter6 Utilities....................................................................................................................80 6.1 Save Parameters ......................................................................................................80 6.2 Restore Parameters............................................................................................
ページ6に含まれる内容の要旨
Chapter1 Product Introduction 1.1 Summary DVR-470/DVR-1670 H.264 network digital video recorder is an excellent digital surveillance product. It uses the embedded MCU and real time operating system, combining the most advanced technology in Information Industry such as video and audio encoding/decoding, hard disk record and TCP/IP. The firmware is burned in the flash, more stable and reliable. DVR-470/DVR-1670 has both the features of digital video recorder (DVR) and digital v video serv
ページ7に含まれる内容の要旨
Support cycle or none cycle record. Support backup the recorded files and clips. Support USB memory, USB HDD, USB CD-R/W, USB DVD-R/W, IDE CD-R/W and IDE DVD-R/W. Preview and playback Support analog monitor and VGA output. Support multiple preview modes. Support sensitive area mask. Support camera spiteful block alarm. Support one channel play back by files or by time. Display local record status. PTZ Support many kinds of PTZ protocol. Support preset, sequence and crui
ページ8に含まれる内容の要旨
Chapter2 Installation Warning：Before you install the DVR, please make sure the power of DVR is off. 2.1 Checking the DVR and Its Accessories When you get the product, check that all the items are included in your product package. There is a list in the package. If any of the items is missing, please contact your dealer. 2.2 HDD Installation Installation notice The DVR has not HDD when leaving factory. Based on the record schedule, you can calculate the total capacity you need (refer to A
ページ9に含まれる内容の要旨
2.3 Rear Panel Description Notice：Please refer to real product for different model. DVR-470 Rear Panel DVR-1670 Rear Panel Index Physical Interface Description 1 Video Input Standard BNC. Video Output Connect monitor, output video and menu. 2 Audio Output 1 channel RCA (1.0 Vp-p, 75Ω) 3 Audio input 4 channel RCA (1.0 Vp-p, 75Ω) DVR-1670 uses DB15 connectores. DVR-470 uses on 4 Video Loop out board BNC connectors. VGA Interface VGA display. 5 Connect RS-232 devices. Re
ページ10に含まれる内容の要旨
External Alarm Input 4/8/16 Alarm in. Relay Output 2/4 Alarm out 8 AC Input 100V~240VAC 2.4 External Alarm In/Out Connection Alarm input port： G (GND)：Conenct the GND of sensor. 1~16：Alarm input, support normal open/normal close. 0：Reserved. Alarm output： 1G~4G：4 relay output. Alarm output connection Please note the usage of jumper JJ1. If you use DC, either of connections is OK. We suggest you to use those DC under 12V, 1A. If you use AC, please open the jumper. The
ページ11に含まれる内容の要旨
Chapter3 Operational Instructions 3.1 Front Panel Index Type Name Description READY DVR is ready. State STATUS Green means you can use IR remote control. 1 Lamps ALARM Red means there is alarm. RECORD Twinkle in red means reading or writing HDD. NETWORK Network status. 2 Lamp IR receiver. Numeric Input number, lower case, upper case character and Keys symbols.
ページ12に含まれる内容の要旨
REC 1. Manual record; 2. 【SHOT】in PTZ control (adjust preset). PTZ 1. Enter into PTZ control mode; 2. 【IRIS-】in PTZ control.. PREV 1. Multi screen preview switch; 2. Switch menu mode into preview; A 【FOCUS-】in PTZ control. 1. Input switch (number, lower case, upper case and symbol); 2. 【FOCUS+】in PTZ control; 3. In preview mode, display or hide the channel status bar. SHIFT Switch between numeric keys and function keys Direction Composed of 【 】,【 】,【 】 and 【 】
ページ13に含まれる内容の要旨
3.2 IR Controller Index Name Description 1 POWER Turnoff device. 2 DEV Enable/Disable IR remote control 3 Numeric Keys Same as numeric keys of front panel. 4 EDIT Same as EDIT key of front panel. 5 A Same as A key of front panel. 6 REC Same as REC key of front panel. 7 PLAY Same as PLAY key of front panel. 8 INFO Same as INFO key of front panel. 9 VOIP Same as VOIP key of frint panel. 10 MENU Same as MENU key of front panel. 11 PREV Same as PREV key of front panel. Direction Key
ページ14に含まれる内容の要旨
15 Reserved 16 F1 Same as【F1】key of front panel. IRIS, FOCUS ZOOM for lens 17 Lens control control. 18 F2 Same as【F2】key of front panel. Loading the batteries into the IR controller 1. Remove the battery cover. 2. Insert the battery. Please take care that the poles (+ and -) are correctly positioned. 3. Replace the battery cover. Start to use IR controller Press【DEV】key, input the DVR device ID (default is “88”, can be changed in “Display” menu) and then press【ENTER】 key. If
ページ15に含まれる内容の要旨
3.3 Menu Description 3.3.1 Menu Items Menu Menu Function Function Name Name Camera name and position setup Unit name Adjust Brightness, Contrast, Hue Device ID and Saturation Require password OSD Display mode, position and Screen saver OSD format setup Video standard Display Image Mask area setup Brightness View tampering area and Menu transparency response setup VGA resolution Video signal loss DST Motion detection sensitivity, area Date and Time and response setup Ove
ページ16に含まれる内容の要旨
Restore parameters Upgrade firmware Text input mode HDD management Transaction ATM IP address Utilities Clear alarm output ATM type Reboot Text information Power off View log System information 3.3.2 Menu Operation How to enter into menu mode Press【MENU】key to enter into DVR main menu. Press【PLAY】short key to enter into playback menu. Perss【REC】short key to enter into manual record menu. Perss【PTZ】short key to enter into PTZ control interface. Notes：You must input user name a
ページ17に含まれる内容の要旨
Each menu contains different kinds of items. There is a small rectangular frame named “Active Frame” which is pointing to the selected item. This “Active Frame” can be moved by 【 】or【 】keys. There are such kinds of menu items： 1. Check Box：Provide 2 options, “ ” means enable and “×” means disable. You can use 【ENTER】or【EDIT】key to switch over. 2. List Box： Provide more than 2 options. However, only one of them can be selected. You can use【↑】and【↓】to select one option. For example,
ページ18に含まれる内容の要旨
3.4 Character Input In the menu interface, if you enter into edit status (for example, in the “camera name” edit box), at the bottom of screen, the input status is appeared： Here it means you can press numeric keys to input digital number. Press【A】 key to change input methods. You can select “number”, “Uppercase”, “Lowercase” or “Symbol”. Uppercase Lowercase Symbol There are 24 symbols in all. They are divided into 4 pages, and you can use【0】key to turn ov
ページ19に含まれる内容の要旨
Chapter4 Basic Operation Guide 4.1 Power on Note：Please make sure the power supply matches DVR and AC cable connected correctly. Before switch DVR on, please connect one monitor with VOUT or VGA interface. Otherwise, you can not see graphic user interface and can not operate. If【POWER】lamp is off, please do as following： Step1：Connect AC cable correctly; Step2：Switch on the power button on the real panel. If【POWER】lamp is in red, just press【POWER】button to start DVR. When DVR i
ページ20に含まれる内容の要旨
Camera record status is following： Icon Icon Color Status Description White No video signal Yellow Vdieo input Pink Manual recording Green Real time recording Blue Motion detect recording Red External alarm recording Page 20
