ページ1に含まれる内容の要旨
INSTALLATION INSTRUCTIONS FOR PART 95-5026
APPLICATIONS
2001-2004 Ford Mustang
2003-2006 Ford Expedition
2002-2005 Ford Explorer
2003-2006 Lincoln Navigator
2002-2005 Lincoln Aviator
2002-2005 Mercury Mountaineer
95-5026
KIT FEATURES
• Double DIN head unit provision
• Stacked ISO DIN head unit provision
KIT COMPONENTS
A) DDIN Trim Plate | B) DDIN Brackets | C) Rear Support Bracket
C
B
A
TOOLS REQUIRED:
Phillips Screwdriver I Socket wrench
1-800-221-0932 www.metraonline.com
© C
ページ2に含まれる内容の要旨
95-5026 TABLE OF CONTENTS Dash Disassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 Kit Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
ページ3に含まれる内容の要旨
DASH DISASSEMBLY 95-5026 2001-2004 FORD MUSTANG A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove shift lever trim panel. (Figure A) 3 Unclip and remove the entire panel surrounding the radio and climate controls including the vents. (Figure B) 4 Remove (2) 9/32” screws securing radio. (Figure B) B 1
ページ4に含まれる内容の要旨
DASH DISASSEMBLY 95-5026 2003-2006 FORD EXPEDITION A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Remove (2) 9/32” screws from above instrument cluster. (Figure A) Unclip and remove entire panel sur- 3 rounding radio, climate controls, and instrument cluster. (Figure B) 4 Remove (2) 9/32” screws securing radio. B 2
ページ5に含まれる内容の要旨
DASH DISASSEMBLY 95-5026 2002-2005 FORD EXPLORER 2002-2005 MERCURY MOUNTAINEER A 1 Disconnect the negative battery ter- minal to prevent an accidental short circuit. 2 Unclip and remove entire panel sur- rounding radio including climate con- trols and vents. (Figure A) Remove (2) 9/32” screws securing 3 radio. (Figure B) B 3
ページ6に含まれる内容の要旨
DASH DISASSEMBLY 95-5026 2003-2006 LINCOLN NAVIGATOR A 1 Disconnect the negative battery ter- minal to prevent an accidental short circuit. 2 Open center console and remove (1) push pin from back of power window switch panel. (Figure A) INSIDE CENTER CONSOLE TOP VIEW Unclip and remove panel. 3 B 4 Remove (2) 9/32” screws exposed on shifter panel then unclip and move shifter panel off to side. (Figure B,C) TOP OF SHIFTER TRIM PANEL 5 Remove (2) 9/32” screws exposed under ashtray assembly. (Fi
ページ7に含まれる内容の要旨
105.9 DASH DISASSEMBLY 95-5026 2003-2005 LINCOLN AVIATOR A 1 Disconnect the negative battery ter- minal to prevent an accidental short circuit. 2 Unclip and remove vent panel above radio on top of dashboard. (Figure A) Remove (2) 9/32” screws exposed 3 under panel removed in step 1. B (Figure B) Unclip and remove panel around 4 radio with door in it. (Figure C) Unclip and remove vents below 5 radio. Figure D) Remove (2) 9/32” screws securing 6 radio. (Figure E) C D E 5
ページ8に含まれる内容の要旨
KIT ASSEMBLY 95-5026 DOUBLE DIN HEAD UNIT PROVISION A 1 Slide the appropriate bracket into the trim plate aligning the holes in the trim plate to the clips on the bracket. (Figure A) Slide the DDIN radio unit into the 2 trim plate bracket assembly and secure the unit to the kit using the screws supplied with the head unit. (Figure B) B Position the rear support bracket 3 with slide grooves facing down and secure to the back of the aftermar- ket radio with the hardware supplied with aftermarket
ページ9に含まれる内容の要旨
KIT ASSEMBLY 95-5026 STACKED ISO DIN HEAD UNIT PROVISION A 1 Slide the appropriate bracket into the trim plate aligning the holes in the trim plate to the clips on the bracket. (Figure A) Slide the stacked ISO DIN units into 2 the trim plate bracket assembly and secure the units to the kit using the screws supplied with the head units. (Figure B) B Position the rear support bracket 3 with slide grooves facing down and secure to the back of the aftermar- ket radio with the hardware supplied with
ページ10に含まれる内容の要旨
FINAL ASSEMBLY 95-5026 FINAL ASSEMBLY Locate the factory wiring harness in the dash and make the connection as shown. 1 Metra recomends using the proper mating adapter and making the connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.) Re-connect the negative battery terminal and test the unit for proper operation. 2 3 Reassemble radio and dash assemblies in reverse order of disassembly. FINAL WIRING CONNECTIONS Make wiring
ページ11に含まれる内容の要旨
95-5026 NOTES 9
ページ12に含まれる内容の要旨
95-5026 INSTRUCTIONS 1-800-221-0932 www.metraonline.com © COPYRIGHT 2004 METRA ELECTRONICS CORPORATION REV. 01/25/06 INST95-5026
