ページ1に含まれる内容の要旨
INSTALLATION INSTRUCTIONS FOR PART 95-2009
APPLICATIONS
GM/SUZUKI
MULTI KIT
95-2009
KIT FEATURES
• Double DIN Radio Provision
• Stacked ISO Mount Units Provision
KIT COMPONENTS
• A) Double DIN Brackets • B) Double DIN Trim Plate • C) Spacers • D) (4) Carriage Bolts
• E) (4) Kep Nuts • F) (3) Screws-(3) Speed Clips
B
C
A
D
WIRING AND ANTENNA CONNECTIONS
(Sold Separately)
• Wiring Harness - Please see www.metraonline.com
for specific interface applications
E
F
• Antenna Adapter -
• 40
ページ2に含まれる内容の要旨
95-2009 VEHICLE APPLICATION CONTENTS *Note: Refer also to the instructions included with the aftermarket radio. HUMMER Dash Disassembly H2 2003-2007 30,31 BUICK ISUZU Century 1997-2005 3 Ascender 2003-2009 28 Amigo 1998-2000 29 Le Sabre 1995-2005 4 I-290/I370 2007-2008 16 Park Avenue 1995-2005 5 I-280/I350 2006 16 Rainier 2004-2007 28 Rodeo 1998-2004 29 Regal 1995-2004 3 Rodeo Sport 2001-200
ページ3に含まれる内容の要旨
95-2009 DASH DISASSEMBLY BUICK • CENTURY 1997-2005 / REGAL 1995-2004 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Remove the plastic trim piece to the left of the glove box and (1) Phillips screw exposed. 3 Unsnap the top edge of the knee bolster panel. 4 Remove (1) Phillips screw from the panel. 5 Remove the ashtray cluster and (2) Phillips screws from each side. 6 Unclip the entire dash trim bezel and remove. 7 Open doors and unsnap end caps from
ページ4に含まれる内容の要旨
95-2009 DASH DISASSEMBLY BUICK • LESABRE / PARK AVENUE 1995-1999 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unsnap the climate control trim panel (from door to door) and remove (4) Phillips screws exposed. 3 Pop out the a/c vents and remove (1) Phillips screw exposed in each vent cavity. 4 Unclip the radio trim bezel and remove. 5 Remove the screws securing the fac- tory head unit and disconnect the wiring. Continue to kit assembly. 4
ページ5に含まれる内容の要旨
95-2009 DASH DISASSEMBLY BUICK • LESABRE / PARK AVENUE 2000-2005 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Open drivers door and unsnap and remove dash end cap. 3 Unsnap and remove trim along center of dash. (One piece on right and one on left of wheel) 4 Unsnap and remove radio/instrument bezel. 5 Remove (2) screws in order to remove radio. Continue to kit assembly. 5
ページ6に含まれる内容の要旨
95-2009 DASH DISASSEMBLY BUICK • RENDEZVOUS 2002-2007 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Open center console and remove 2 screws at front of console opening. 3 Remove liners from cup holders and storage pocket next to cup holders, then remove screws. Unsnap and remove panel. 4 Remove (2) screws from bottom of radio/climate control bezel, unclip and remove. 5 Remove (3) 9/32" hex head screws to remove radio. Continue to kit assembly. 6
ページ7に含まれる内容の要旨
95-2009 DASH DISASSEMBLY BUICK • RIVIERA 1996- 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unsnap left side panel exposing (1) Phillips screw to remove. 3 Remove (1) Phillips screw and unsnap right side panel to expose (1) Phillips screw beneath panel and remove. 4 Unsnap underside of overhanging dash to unsnap (6) plastic rivets and remove panel. 5 Remove (5) hex head screws now exposed under overhang. 6 Unsnap bottom edge of trim bezel, then while holdi
ページ8に含まれる内容の要旨
95-2009 DASH DISASSEMBLY BUICK • ROADMASTER 1995-1996 Disconnect the negative battery terminal to prevent an accidental short circuit. 1 2 Unclip dash panel sides and remove. 3 Unclip panel below steering column and remove. 4 Remove (2) 7mm screws above instrument cluster. 5 Set parking brake, turn car on, and move shifter to the lowest gear. Tilt steering wheel down then unsnap entire instrument cluster/radio panel and remove. 6 Remove (3) 7mm screws to remove radio. Continue to kit assembly.
ページ9に含まれる内容の要旨
95-2009 DASH DISASSEMBLY BUICK • SKYLARK 1996-1998 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Remove (6) 9/32" screws inside glove box. 3 Under glove box and drivers knee bol- ster, remove (2) plastic panels by turning (2) 1/4 turn fasteners per side. 4 Remove (4) 9/32" screws revealed. (2 per side). 5 Unsnap panel from driver's side to passenger's side. 6 Remove (3) 9/32" screws to remove radio. Continue to kit assembly. 9
ページ10に含まれる内容の要旨
95-2009 DASH DISASSEMBLY CADILLAC • ESCALADE 2003-2006 CHEVROLET • AVALANCHE 2003-2006 SILVERADO 2003-2007 / SUBURBAN 2003-2006 TAHOE 2003-2006 GMC • SIERRA 2003-2007 YUKON / DENALI / XL 2003-2006 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unsnap and remove dash bezel. 3 Remove (3) 9/32" screws and remove radio. Continue to kit assembly. 10
ページ11に含まれる内容の要旨
95-2009 DASH DISASSEMBLY CADILLAC • FLEETWOOD FLEETWOOD BROUGHAM 1990-1996 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Carefully unsnap trim panel above a/c controls. 3 Remove (2) 7mm screws at the top of the radio/air conditioning bezel, then unclip panel and remove. 4 Remove (4) 7mm screws that hold the radio in, slide radio out, unplug the radio harnesses and remove radio. Continue to kit assembly. 11
ページ12に含まれる内容の要旨
95-2009 DASH DISASSEMBLY CADILLAC • FLEETWOOD FLEETWOOD BROUGHAM 1990-1996 RADIO BRACKET DISASSEMBLY 1 Remove (4) 10mm nuts, (2) on top of the radio and (2) on the bottom of the radio, that hold the factory mounting brackets on. save brackets and nuts for kit assembly. 12
ページ13に含まれる内容の要旨
95-2009 DASH DISASSEMBLY CADILLAC • ELDORADO 1992-1995 SEVILLE 1992-1995 1 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Using a panel removal tool, pry out on the radio trim ring and remove. Use extreme care when removing). 3 Gently pry up on the ashtray/gear shifter trim bezel and remove. (CAUTION: Some models are equipped with bezels made of real wood. 4 Remove (2) nuts securing the bottom of the factory head unit and discon- nect the wiring. Continue
ページ14に含まれる内容の要旨
95-2009 DASH DISASSEMBLY CHEVROLET • BLAZER 2002-2005 S-10 2002-2004 (WITH DOUBLE DIN RADIO) GMC • SONOMA 2002-2004 OLDSMOBILE • BRAVADA 1998-2001 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Remove (2) 9/32" hex-head screws from the knee bolster panel. 3 Pull down on the panel and remove the 9/32" hex-head screws exposed on the bottom of the dash trim bezel. 4 Remove (1) Phillips screw above the instrument cluster. 5 Unclip the dash trim bezel and
ページ15に含まれる内容の要旨
95-2009 DASH DISASSEMBLY CHEVROLET • CAVALIER 2000-2005 Disconnect the negative battery terminal to prevent an accidental short circuit. 1 2 Open drivers door and remove fuse panel on end of dash. 3 Open passenger door and remove panel on end of dash. 4 Remove (1) Phillips screw from each side exposed. 5 Remove (3) screws from top of glove box liner. 6 Remove (2) screws from the top-left corner of the glove box cavity. 7 Remove (1) Phillips screw from the defroster duct. 8 Remove the ductw
ページ16に含まれる内容の要旨
95-2009 DASH DISASSEMBLY CHEVROLET • COLORADO 2004-2010 GMC • CANYON 2004-2010 ISUZU • I-290/I-370 2007-2008 I-280/I-350 2006 Disconnect the negative battery terminal to prevent an accidental short circuit. 1 2 Unsnap and remove the entire panel surrounding the radio and A/C controls. (Figure A) 3 Remove (3) 9/32”screws securing the radio to remove. (Figure B) Continue to kit assembly. 16
ページ17に含まれる内容の要旨
95-2009 DASH DISASSEMBLY CHEVROLET • EXPRESS VAN 2001-2002 GMC • SAVANNA 2001-2002 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unsnap and remove small trim panel below steering column. 3 Unsnap radio/climate/instrument panel. 4 Move shift lever to first gear position. 5 Rotate panel counterclockwise to lift over steering column and remove. 6 Remove (3) 9/32" hex head screws to remove radio. Continue to kit assembly. 17
ページ18に含まれる内容の要旨
95-2009 DASH DISASSEMBLY CHEVROLET • EXPRESS VAN 2003-2007 GMC • SAVANNA 2003-2007 Disconnect the negative battery terminal to prevent an accidental short circuit. 1 2 Remove (2) 10mm bolts from below knee bolster under steering column and remove panel. 3 Remove (2) 10mm bolts from panel below passenger dash airbag and remove panel. 4 Remove (2) 10mm nuts from inside center pocket between power outlets. 5 Unsnap and remove radio and instrument cluster panel. (May not be necessary to completely
ページ19に含まれる内容の要旨
95-2009 DASH DISASSEMBLY CHEVROLET • IMPALA 2000-2005 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip each side of the dash trim bezel (fuse access) and remove (1) Phillips screw exposed on each side. 3 Remove (2) Phillips screws under the instrument cluster. 4 Unclip the trim panel above the pedals. (It is not necessary to remove the panel it can be left hanging). 5 Remove (2) Phillips screws from the knee panel. 6 Unclip the knee panel and re
ページ20に含まれる内容の要旨
95-2009 DASH DISASSEMBLY CHEVROLET • MALIBU 2001-2003 MALIBU CLASSIC 2004 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unsnap and remove radio bezel. 3 Remove (3) bolts and remove radio. Continue to kit assembly. 20
