ページ1に含まれる内容の要旨
DIGITAL RECORDER
USER’S MANUAL
MODEL
DX-TL5716E
THIS INSTRUCTION MANUAL IS IMPORTANT TO YOU. PLEASE READ IT BEFORE USING YOUR DIGITAL RECORDER.
1
OTHERS NEDERLANDS ITALIANO ESPAÑOL FRANÇAIS DEUTSCH ENGLISH
ページ2に含まれる内容の要旨
Before use / Contents How to use this User's Guide Contents Beginning About this User's Guide Before use / Contents • • • • • • • • • • • • • • • • • •2 The manual of this recorder consists of the following two manuals. Caution and care • • • • • • • • • • • • • • • • • • • • •3 Installation Manual Note • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •10 This manual describes connections of devices as well as functional settings and operations to use this unit. Software License Agr
ページ3に含まれる内容の要旨
Caution and care HEAVY OBJECTS SHOULD NEVER BE PLACED ON THE UNIT (E.G., MONITOR) NEVER TOUCH OR INSERT ANY OBJECT INSIDE THE UNIT Touching the inside of the cabinet or inserting foreign objects of any kind through the disc loading slot or ventilation holes not only creates a safety hazard but can also cause extensive damage. PROTECT THE POWER CORD Damage to the power cord may cause fi re or shock hazard. If the power cord is damaged, turn OFF the MAIN switch and carefully unplug the cord by ho
ページ4に含まれる内容の要旨
Caution and care (continued) Warning This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Note: This symbol mark is for EU countries only. This symbol mark is according to the directive 2002/96/EC Article 10 Information for users and Annex IV, and/or to the directive 2006/66/EC Article 20 Information for end-users and Annex II. Your MITSUBISHI ELECTRIC product is designed and manufacture
ページ5に含まれる内容の要旨
Installation location and handling • Before you fi rst use this unit, supply power to it for at least 48 hours to charge the built-in backup battery so that the built-in power compensator circuit can be activated. When the battery isn't charged suffi ciently, the built-in clock may go wrong or the unit may not able to recover in case of a power failure. • Don't plug this unit and high current devices (such as copier and air conditioning) into the same wall socket. • Place this unit on a level a
ページ6に含まれる内容の要旨
Caution and care (continued) Changing installation location • When moving this unit, be sure to turn off the MAIN switch, make sure that the unit is completely stopped, and then unplug the power cord. When this unit is exposed to excessive shock while being energized, the internal electronic parts or HDD may be damaged. Be careful especially while the power indicator or access indicator is blinking. • Don't move this unit for at least one minute after you turn off the power. Even after the pow
ページ7に含まれる内容の要旨
For important recordings • Be sure to perform test recording before starting the practical operation of this unit, and also check regularly that the recording is performed correctly according to the settings during the practical operation. • Mitsubishi doesn't compensate for data not recorded or not played back correctly because of a failure occurring in this unit or connected devices during the use of this unit. • As a preparation for unexpected breakdown or accident, you are recommended to m
ページ8に含まれる内容の要旨
Caution and care (continued) Maintenance of DVD drive (laser pickup) • Dust or dirt on the recording/playback lens causes image disturbance and sound skipping, making it impossible to perform recording or playback correctly. Ask your Mitsubishi dealer for cleaning. Don't use commercially available lens cleaning discs because they may damage the lens. • The DVD drive may be prone to have an error in recording or playback when its operating time for recording and playback exceeds 1000 hours. CL
ページ9に含まれる内容の要旨
Network • It is recommended to confi rm with your network administrator about the network settings in advance. • As this unit is operated through network, you may suffer from damage as follows. (1) Leakage or drain of information through this unit. (2) Unauthorized operation of this unit by malicious third parties. (3) Disturbance or deactivation of this unit by malicious third parties. To prevent damage listed above, take suffi cient network security measures on your own responsibility. • Set a
ページ10に含まれる内容の要旨
Note Open source software Thank you for purchasing Mitsubishi digital recorder DX-TL5716E (hereinafter referred to as “Product”). Before using this Product, please be sure to read the following Software License Agreement with regard to the software contained in this Product (hereinafter referred to as “Licensed Software”). By using this Product, you are agreeing to be bound by the terms and conditions of the following Software License Agreement. This Product contains software programs that ar
ページ11に含まれる内容の要旨
Software License Agreement This Software License Agreement (“Agreement”) is an agreement between you (“User”) and Mitsubishi Electric Corporation (“Licensor”) with regard to the license to use Licensed Software. Article 1 (Grant of license) Licensor hereby grants to User a nonexclusive, nontransferable license to use Licensed Software. Article 2 (License) 1. The license to use Licensed Software granted hereunder shall mean the User’s right to use Licensed Software sole- ly on this Product. U
ページ12に含まれる内容の要旨
Adjusting the built-in clock 1 Left-click the mouse to display . You can display also by pressing the SET UP button on the front panel. 2 Select “Setup” to display the screen. Setup 3 Select “Setting” next to “Clock and language Setup Clock and language setting Setting setting” to display the screen. 4 Click on each of day, month, year, hour, ? Clock and language minute, and second until the desired value Clock setting (SNTP is active
ページ13に含まれる内容の要旨
Playing back recorded images 1 Press the PLAY button on the front panel. 2 You can play back images even during recording. 2 Press the PAUSE button to pause playback. (Still image playback) 1 3 Press the STOP button to stop playback. 3 Notice • When you change the multiplexer, playback direction, or playback speed during playback, a black screen may be displayed. • When you change the multiplexer or the playback-related settings during playback, or when you play back data where recording st
ページ14に含まれる内容の要旨
Changing the screen mode to display images from cameras You can change the screen mode to display images on the monitor. Displaying images in the single screen mode 1 Press the button of the camera you want to display. Camera number buttons Displaying images in the split screen mode * The numbers shown in the figures indicate the factory-default camera number display positions. 1 Press the 4-split button. 4-split a 4-split b 12 56 Each time you press the button, the screen mode changes in th
ページ15に含まれる内容の要旨
Notice • You cannot switch the screen mode while the menu screen is displayed. To switch the screen mode, close the menu screen fi rst and then press the camera number button or a split button. Tips • To set the camera number to be displayed in each screen mode, use in the menu. You can set the camera number to be displayed differently for each of output A and output B. Convenient function Changing the screen mode using the mouse (single screen mode) Right-click
ページ16に含まれる内容の要旨
Searching for the desired image You can search for images by specifying the recording date and time. 1 Press the SEARCH button on the front panel to display . 1 2 Click the device name under “Play device” (for ? Search menu 1 12-01-2008 Sat example, HDD (Emergency)) until the desired Play device 13:35:17 HDD (Emergency) 2 device name appears. Start : 01-01-2008 09:24:31 Execute search You cannot select devices that are not set. End : 11-11-2008 02:50:08 Execute search 3 Camera
ページ17に含まれる内容の要旨
Convenient function Displaying using the mouse Right-click the mouse. 1 The mouse operation screen is displayed. Click the button to expand the menu. 2 3 Click the Search button ( ). is displayed. Specifying the search time using the calendar 1 Click “Time and date” of . ? Set the search start time 01/2008 Hour 2 The screen is displayed. SunMon Tue Wed Thu Fri Sat 02 1 345 12 3 4 5 68 7 91011 2 Click on each of year an
ページ18に含まれる内容の要旨
Copying recorded images You can copy the still image being displayed to a USB memory device or DVD/CD disc as a still or moving image (one-touch copy). This function is convenient to copy recording data for a short period of time. 1 Set a USB memory or a DVD/CD disc in the recorder. The recorder automatically detects the copy destination device. When both a USB memory device and DVD/CD disc are detected, the DVD/CD disc is used as the copy destination device. 2 Display the image you want
ページ19に含まれる内容の要旨
Convenient function Displaying using the mouse Right-click the mouse. 1 The mouse operation screen is displayed. Click the button to expand the menu. 2 3 Click the Copy button ( ). is displayed. In addition to one-touch copy, you can copy images using the following methods. For the detailed operating procedures, see the Installation Manual. Copying data by specifying the copy range This function copies data based on the specifi ed start and end times and data size.
ページ20に含まれる内容の要旨
SLD Security & Communications The Old Forge, Ockham Lane, Ockham, Surrey GU236PH England Phone +44.1483225633 · Fax +44.1483225634 sales@sld.co.uk · www.sld.co.uk
