ページ12に含まれる内容の要旨
DVR MENU OPTIONS SYSTEM 1. AUDIO INPUT (MENU) To choose one of 4 channels to record. (only can select 1 during operation for recording) TIMER RECORD 2. INT AUDIBLE ALARM CAMERA To set the INTERNAL AUDIBLE ALARM. It will be triggered by event occurrence when ►SYSTEM the setting is ON. EVENT 3. EXT AUDIBLE ALARM To set the EXTERNAL AUDIBLE ALARM. It will be triggered by event occurrence when the setting is ON. 4. MOTION AUDIBLE ALARM (SYSTEM) To set the MOTION AUDIBLE ALARM. It will be trigge
ページ13に含まれる内容の要旨
12. CLEAR HDD Delete all the contents of your HDD. When you choose “YES” on this option, you will be prompted with the question shown : Press “ ►” to clear HDD or press ” ◄” to confirm not to clear HDD. ALL DATA IN HDD 13. SYSTEM RESET WILL BE CLEARED Reset all system settings back to factory default settings. ARE YOU SURE? ( ◄ : NO ► : YES ) 14. REMOTE MODE Set the remote mode for connection with computer via RS-232 or RS-485. (Please refer to page.17 for RS-232 Remote Protocol) 15. BAUD RAT
ページ14に含まれる内容の要旨
(MENU) RECORD TIMER ► RECORD 1. HDD OVERWRITE CAMERA Select “YES” to overwrite previously recorded video in HDD. SYSTEM NOTE : When the HDD is full under O/W Recording mode, previous recorded files EVENT may be overwritten without further warning notices. 2. RECORD IPS (RECORD) Select the images per second of recording. The options are ► HDD OVERWRITE: NO as following : RECORD IPS: 25A NTSC －25A 、15 、8 、4 、2 、1 RECORD QUALITY : NORMAL PAL －18A 、12 、6 、3 、2 、1 ALARM REC IPS: 25A NOTE : “A” mea
ページ15に含まれる内容の要旨
DVR MOTION DETECTION MOTION DETECTION SETUP 1. Press “ MENU “ to enter the menu set up, then “ Down ” to CAMERA setup. 2. Press “ENTER” twice to enter the Motion Detection Setup. 3. Each screen displays the current camera picture overlaid with the motion targets (as Figure 1). You can push the button “ Left ” or “ Right ”, ” Up ” or “ Down ” to adjust motion detection in ON or OFF. 4. The targets on each motion setup can be turned to ON or OFF individually. To set up targets, using the
ページ16に含まれる内容の要旨
Figure 1-1 MOTION DETECTION SETUP — 1~15 Figure 1 MOTION DETECTION SETUP 1 234 5 6 7 8 9 10 11 12 13 14 15 1 234 5 6 7 8 9 10 11 12 13 14 15 032 032 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Figure 1-2 MOTION DETECTION SETUP-- LINE Figure 1-3 MOTION DETECTION SETUP-- ALL 1 234 5 6 7 8 9 10 11 12 13 14 15 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 032 032 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- EVENT There
ページ17に含まれる内容の要旨
Advanced Operation OPERATION OPTIONS PICTURE IN PICTURE (PIP) Press PIP button to enter PIP display screen. The PIP format displays a full screen “background” picture with a 1 / 16 size screen “insert”. Press button to move the insert screen. Press “Enter” button to confirm the camera selection. Press “Left” or “Right” to choose background or insert screen. Press camera select (1-4) to select appointed camera into screen. Press “Menu“ to exit ZOOM Press ZOOM button to enl
ページ18に含まれる内容の要旨
DVR KEY LOCK For added security, you can “Lock” the buttons on your DVR. Locking disables the buttons and prevents other people from using the system. Press ENTER and MENU at the same time to enable Key Lock. Press ENTER and MENU at the same time and key in password (Default : 0000), then press “ENTER“ to disable Key Lock. RS-232 REMOTE PROTOCOL You can use the PC keyboard to simulate DVR keypad. DATA: REMOTE PROTOCOL using 8 bit data 、1 start bit 、1stop bit FUNCTION CODE ASCII FUNCTION CODE AS
ページ19に含まれる内容の要旨
DVR SPECIFICATIONS Video format NTSC/EIA or PAL/CCIR Hard disk storage IDE type, UDMA 66, supported 250 GB HDD Manual / Alarm / Timer / Motion Record mode Camera Input Signal Composite video signal 1 Vp-p 75 BNC, 4 channels Ω Camera Loop Back Composite video signal 1 Vp-p 75 BNC, 4 channels Ω Main Monitor Output Composite video signal 1 Vp-p 75 BNC Ω Call Monitor Output Composite video signal 1 Vp-p 75 BNC Ω 4 audio inputs, (RCA) * Audio input Audio output 2 audio outputs, (RCA) ** Motion Dete
ページ20に含まれる内容の要旨
APPENDIX #1 – INSTALLING the HDD Please follow the steps carefully in order to ensure correct installation. The compartment located on the front panel of the DVR is the removable Cartridge Casing, in which you insert the HDD. The various parts of the Cartridge Casing are labeled for your reference. 1.Remove the Cartridge Casing from the DVR Keyhole Cartridge Casing LED indicator lights Handle 2. Remove the Cover from the Cartridge Casing Unclip the release latch with the word “OPEN” printed be
ページ1に含まれる内容の要旨
WARNING
1
ページ2に含まれる内容の要旨
DVR WARNING All the safety and operating instructions should be read before operation. The improper operation of this device may cause permanent damage. ‧ Please use the provided adapter (Other adapter is not suitable for this machine). ‧ Please lift and place this equipment gently. ‧ Do not expose this equipment to open sunlight. ‧ Do not use this equipment near water or in contact with water. ‧ Do not spill liquid of any kind on the equipment. ‧ Please power down the unit before unplugging.
ページ3に含まれる内容の要旨
DVR TABLE OF CONTENTS What do you get What do you get ? ? ‧ FEATURES ---------------------------------------------------------------------------------------- 3 ‧ PACKAGE CONTENTS ------------------------------------------------------------------------- 3 Before Operation Before Operation ‧ INSTALLATION GUIDE ------------------------------------------------------------------------ 4 ‧ FRONT PANEL ----------------------------------------------------------------------------------- 5 7 ‧ BACK PANEL
ページ4に含まれる内容の要旨
What do you get ? FEATURES DVR Features • Wavelet Compression Format replaces Time-Lapse VCR + Multiplexer • 4 Audio inputs / 2 Audio outputs (selectable 1-channel recording) • On Screen Display and RTC (Real time clock) Function • Support from 1 channel to 4 channels of video inputs • Picture-In-Picture (PIP) is available in live and DVR playback modes • Motion detection function and 4 Level video quality adjustable on each channel • Alarm Input & Output Function • Video loss detection on each
ページ5に含まれる内容の要旨
Before Operation INSTALLATION GUIDE 1. Connect cameras and monitor with the DVR. 2. Shown below is one example for connecting the DVR to your existing Observation System. 3. Install HDD (The compatible HDD Brands are listed in the following table.) Please refer to page.19 Appendix #1 for installation instructions. The HDD must be installed before turning on the DVR. COMPATIBLE HARD DISK BRANDS HITACHI Deskstar 180 GXP (120 GB) 120GB 7200 rpm HITACHI Deskstar 7K250, HDS722516VLAT20 7200rpm 160GB
ページ6に含まれる内容の要旨
DVR FRONT PANEL 17 2 CDR-04S HDD HDD FULL TIMER ALARM 13 2 4 MENU ENTER SEARCH SLOW Z00M PLAY REC POWER REW FF STOP 16 10 11 4 5 14 13 15 3 6 7 12 1 8 9 1. REMOVABLE HDD CARTRIDGE Please refer to page 19, Appendix #1. 2. LED LIGHT The LED Light is ON under following conditions. ‧HDD Full : HDD is full ‧ALARM : If you want to turn off the ALARM LED light, please refer to page.13 and set the Camera / ALARM item as OFF. (all of the cameras should be set as OFF.) ‧TIMER : When Timer is set as Ena
ページ7に含まれる内容の要旨
11. POWER Press Power to turn ON / OFF the DVR. 12. FF / Right ‧FF : It can play video forward at high speed, and press FF again to adjust speed from 1, 2, 4, 8, 16, 32 times. ‧Right : Under setup mode, it can work as Right button. 13. PAUSE / Up ‧Pause : Under DVR play mode, it can pause the action. ‧UP : Under setup mode, it works as Up button. 14. REW / Left ‧REW : Under DVR play mode, it can play video backward at different speeds. (Press REW again to adjust speed as 1, 2, 4, 8, 16, 32 t
ページ8に含まれる内容の要旨
DVR BACK PANEL 9 8 MAIN LOOP IN OUT RISK OF ELECTRIC SHOCK DO NOT OPEN WARNIN : T GO REDUCE THE RISK OF ELECTRIC SHOCK, INPUT 1 3 R HI DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 2 4 L 75 Ω CALL POWER EXTERNAL I/O 6 7 3 4 5 1 2 1. POWER Please use the provided adapter to connect power cord (Other adapter is not suitable for this machine). 2. EXTERNAL I/O ‧Controlled remotely by an external device or control system. ‧Alarm input
ページ9に含まれる内容の要旨
Basic Operation START THIS UNIT Before using the DVR, please have a HDD installed ready. (refer to Appendix #1 for installation or removal of a HDD). 1. Connect the AC Power Cord with Power Adapter and plug into an electrical outlet. The Red LED indicator light will be ON and the DVR is in Standby mode. 2. Press the Power button. The POWER LED will turn from red to orange, and other red LED indicators will turn ON. It takes approximately 5 to 15 seconds to boot the system with the message : “
ページ10に含まれる内容の要旨
PLAY Press “ PLAY ” button, the DVR will show the last recording. 1. FAST FORWARD (F.F. ) & FAST REWIND (F.R.) You can increase the speeds of Fast Forward and Rewind on the DVR. In the Play mode, press ” ►► ” once to get 2X speed forward and press twice to get 4X speed,… and the maximum speed can reach 32X. Press ” ◄◄ ” once to get 1X speed rewind and press twice to get 2X speed, … and the maximum speed can reach 32X. 2. SLOW FORWARD (S.F.) & SLOW REWIND (S.R.) You can also slow down the spe
ページ11に含まれる内容の要旨
Detailed Menu Setup ACCESS MENU The Menu allows you to configure your DVR settings. Please follow below steps to access the Menu : Password: 0000 Press the Menu button. The password screen will appear: NOTE : The default Password is 0000. Simply press the Enter button to access the Menu. To key-in the Password, press the “Right” and “Left” buttons to move between numbers, and use the “Up” and “Down” buttons to input the number. Press the ENTER button once the correct Password is entered. The ME
