ページ1に含まれる内容の要旨
LCD MONITOR / 8 CHANNEL
DVR COMBO
Instruction Manual
English Version 1.0
SERIES:
SG17LD800 & SG19LD800
www.lorexcctv.com
Series Includes: SG17LD800 & SG19LD800 Series (NTSC); SG17LD800P & SG19LD800P Series
(PAL); SG17LD804-161 & SG19LD804-161; SG17LD804P-161 & SG19LD804P-161
Copyright © 2007 LOREX Technology Inc.
ページ2に含まれる内容の要旨
Thank you for purchasing the LCD / 8 Channel DVR Combo. Lorex is committed to providing our customers with a high quality, reliable security product. This system offers a whole new level of security surveillance to the consumer market. Combining the latest word in LCD displays, Digital Video Recording and CCTV Camera design, the system does more than simply provide the sharpest video imaging (under any condition), large capacity video storage and unparalleled ease of system control – it’s
ページ3に含まれる内容の要旨
Important Safeguards Important Safeguards In addition to the careful attention devoted to quality standards in the manufacture process of your video product, safety is a major factor in the design of every instrument. However, safety is your responsibility too. This sheet lists important information that will help to assure your enjoyment and proper use of the video product and accessory equipment. Please read them carefully before operating and using your video product. Installation 1. Read
ページ4に含まれる内容の要旨
Important Safeguards Service Use 13. Servicing - Do not attempt to service this video 19. Cleaning - Unplug the video product from the wall equipment yourself as opening or removing covers outlet before cleaning. Do not use liquid cleaners or may expose you to dangerous voltage or other aerosol cleaners. Use a damp cloth for cleaning. hazards. Refer all servicing to qualified service personnel. 20. Product and Cart Combination - Video and cart combination should be moved with care. Quick 1
ページ5に含まれる内容の要旨
General Precautions NOTE This equipment has been certified and found to comply with the limits regulated by FCC, EMC, and LVD. Therefore, it is designated to provide reasonable protection against interference and will not cause interference with other appliance usage. However, it is imperative that the user follows this manuals guidelines to avoid improper usage which may result in damage to the unit, electrical shock and fire hazard injury In order to improve the feature functions and qualit
ページ6に含まれる内容の要旨
LCD/DVR COMBO FEATURES LCD/DVR COMBO FEATURES � Professional A-Grade LCD with ultra fast 8ms refresh rate and wide viewing angle (+/- 75 degrees vertical and horizontal) � Pentaplex operation - simultaneously functionality: Live Viewing Recording Playback Backup Network Controls � MPEG4 Compression: Small File sizes without comprised video quality � Installed Seagate SV35 Series HDD: Hard Drives specifically designed for optimal performance in the commercial video security market. The
ページ7に含まれる内容の要旨
Table of Contents Table of Contents Getting Started .......................................................................................... 9 Front Panel ........................................................................................ 10-13 Rear Panel ......................................................................................... 14-15 Remote Control ....................................................................................... 16 MC7520 Cameras ....................
ページ8に含まれる内容の要旨
Table of Contents Disk Management ................................................................................... 49 Recording Menu Controls .................................................................. 50-51 Recording Menu Options ........................................................................................................... 50 Recording Operations ................................................................................................................ 51 Switching
ページ9に含まれる内容の要旨
Getting Started Getting Started The system comes with the following components: 4 x CAMERAS WITH LCD & DVR COMBO UNIT STANDS WITH INSTALLED 160 GB HDD POWER ADAPTER 4 x 100 FT. (30M) EXTENSION CABLES REMOTE ETHERNET HARDWARE & SOFTWARE CONTROL CABLE MANUALS & SOFTWARE CD CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE. 9
ページ10に含まれる内容の要旨
Front Panel Front Panel 1 2 3 4 5 6 8 10 13 15 16 7 9 11 12 14 1. REW BUTTON - Reverses the playback of the currently displayed Video 2. FF BUTTON - Fast forwards the playback of the currently displayed Video 3. DISPLAY - Changes the onscreen Camera display: � Single - Displays a single camera onscreen � Quad - Displays 4 cameras onscreen � 6 Camera Display - Displays 6 cameras onscreen. One main camera is displayed in the top left corner, and 5 other cameras frame the bottom and right side.
ページ11に含まれる内容の要旨
Front Panel 4 5 6 7 4. PTZ BUTTON - Accesses the PTZ (Pan/Tilt/Zoom) Menu. Refer to page 35 for Pan/Tilt/Zoom options NOTE: PTZ option will only work with PTZ type cameras (not provided with this unit). Visit the Lorex website at http://www.lorexcctv.com for a full range of Pan/Tilt/Zoom Cameras. 5. SEARCH BUTTON - Opens the Search Menu to view previously recorded data. Refer to page 25 for detailed search options. 6. SYSTEM LEDs - Indicates the system status: � PWR - Indicates that the syste
ページ12に含まれる内容の要旨
Front Panel 8 10 9 11 8. CHANNEL SELECT BUTTONS - Displays individual camera views. Also used to input the system Password when accessing the Setup Menu. 9. RETURN BUTTON - � Returns to a previous screen in Menu Mode. � Exits from Menu Setup (when in the Main Menu screen). Exits from Search and PTZ Modes. 10. PLAYBACK / NAVIGATION CONTROLS - � Controls the playback of video (Play / Pause / Fast Forward / Rewind), and controls the viewing area in PTZ Viewing Mode. � Navigates in the Main Men
ページ13に含まれる内容の要旨
Front Panel 15 12 13 14 16 12. SEQ BUTTON - Used to Sequence between all camera locations in Full Screen mode (in sequential order). To exit Sequence Mode, Press the SEQ button again 13. ZOOM BUTTON - This monitor is equipped with digital ZOOM. To utilize this feature proceed as follows: � Set the monitor to full screen mode for the desired channel � Press the ZOOM button. ZOOM mode is now active � Use the Navigation Buttons [ ] keys to move the area being captured in ZOOM MODE. � To exit Z
ページ14に含まれる内容の要旨
Rear Panel Rear Panel 1 8 9 2 3 4 5 6 7 1. 6 PIN DIN CAMERA INPUTS - Channel 1-8 Camera inputs (for cameras with 6 Pin DIN connections). DIN type cameras are provided with the System. Cameras with 6 Pin DIN connections draw power from the System - additional power adapters are not needed. 6 PIN DIN 2. RCA AUDIO INPUTS - Channel 1-4 Audio inputs (for BNC type cameras with standard RCA Audio output) 3. BNC VIDEO INPUTS - Channel 1-8 camera inputs (used to connect Cameras with BNC connection
ページ15に含まれる内容の要旨
Rear Panel 8 9 4 5 6 7 4. SPOT OUT - Video Output port to connect the unit to a secondary DVR or TV 5. AUDIO OUT - Audio Output port to connect the unit to a secondary DVR or TV 6. ALARM FUNCTION TERMINALS (INPUT/OUTPUT) - These terminals are used to connect external alarm devices such as a motion sensor, door/alarm sensor, or time lapse VCR for Alarm Recording. Refer to page 73 for Alarm Block Configuration. 7. PTZ CAMERA TERMINALS - These terminals are used to control PTZ (Pan/Tilt/Zoom) typ
ページ16に含まれる内容の要旨
Remote Control Remote Control Listed below is a quick reference for the Remote Control. POWER BUTTON - SETUP BUTTON - Turns the system power Opens the Main Menu ON/OFF (system setup) REMOTE ID* - CHANNEL BUTTONS - Configure when using Press to select a multiple systems.* specific camera by number RETURN BUTTON - Returns to the previous AUDIO SELECT - selection in Menu Mode. Press to select an audio Exits the Menu Setup channel. Press the when in the Main Menu. Audio select button,
ページ17に含まれる内容の要旨
MC7520 Cameras MC7520 Cameras The System includes 4 CCD Color IR Day/Night Indoor/Outdoor Cameras* INFRA-RED LEDs - Provides illumination for low light conditions CAMERA LENS MICROPHONE - Picks up sound near the camera and transmits to the System (located on the rear of the camera). STAND - Stand connects to the Camera for mounting to walls, ceilings and other surfaces INPUT CABLE - Connects Video / Audio / Power from the System * Picture changes from Color to B&W under low light c
ページ18に含まれる内容の要旨
Camera Installation Camera Installation Before you install the camera, carefully plan where and how you will position the camera, and where you will route the cable that connects the camera to the System. Installation Warnings: � Select a location for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight. � Plan the cables’ route so that it is not close to power or telephone line
ページ19に含まれる内容の要旨
Camera Installation Connecting Cameras 1. Connect the female end of the supplied 100’ extension’ cable to the camera. NOTE: Confirm that the arrows on the DIN Camera Cable and the DIN Extension cable are pointed together when connecting the cable. If the pins in the DIN Cable are bent, the Camera will NOT function. 2. Connect the male end of the supplied 100’ extension cable to an open DIN camera input on the back of the System. Continue connecting additional DIN cameras. NOTE: The arrow on
ページ20に含まれる内容の要旨
Display Modes Display Modes Initial Loading Sequence � Press the POWER button located on the front panel of the Observation System to start the unit. � The System will perform a Hard Drive check NOTE: This unit includes a 160GB Hard Drive. � The unit will initially load to a split screen view, displaying all 8 cameras (if available). NOTE: If a new HARD DRIVE is detected, the system will prompt you to FORMAT the drive. If you do not choose to format the HARD DRIVE, the drive will not be dete
