ページ1に含まれる内容の要旨
PROFESSIONAL 19” LCD
OBSERVATION SYSTEM
WITH BUILT-IN 8 CHANNEL
DIGITAL VIDEO RECORDER
Instruction Manual
English Version 5.0
MODEL:
L19LD800 Series
www.lorexcctv.com
Copyright © 2007 Lorex Technology Inc.
ページ2に含まれる内容の要旨
Thank you for purchasing the LCD / 8 Channel DVR Combo. Lorex is committed to providing our customers with a high quality, reliable security product. This system offers a whole new level of security surveillance to the consumer market. Combining the latest word in LCD displays, Digital Video Recording and CCTV Camera design, the system does more than simply provide the sharpest video imaging (under any condition), large capacity video storage and unparalleled ease of
ページ3に含まれる内容の要旨
Important Safeguards Important Safeguards In addition to the careful attention devoted to quality standards in the manufacture process of your video product, safety is a major factor in the design of every instrument. However, safety is your responsibility too. This sheet lists important information that will help to assure your enjoyment and proper use of the video product and accessory equipment. Please read them carefully before operating and using your video product. Installati
ページ4に含まれる内容の要旨
Important Safeguards Service Use 18. Cleaning - Unplug the video product from the 12. Servicing - Do not attempt to service this wall outlet before cleaning. Do not use liquid video equipment yourself as opening or cleaners or aerosol cleaners. Use a damp removing covers may expose you to cloth for cleaning. dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19. Product and Cart Combination - Video and cart combination should be moved
ページ5に含まれる内容の要旨
General Precautions General Precautions 1. All warnings and instructions of this manual should be followed 2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use a water dampened cloth for cleaning 3. Do not use this unit in humid or wet places 4. Keep enough space around the unit for ventilation. Slots and openings in the storage cabinet should not be blocked 5. During lightning storms, or when the unit is not used for a long time, disconnect the
ページ6に含まれる内容の要旨
L19LD800 Series Features L19LD800 Series Features • Internet Remote Viewing*, Backup and Control utilizing a web browser or client software (included) • ‘True’ 8 Camera digital video system with Triplex operation allows you to View, Playback and Record video simultaneously • Thin design 19” LCD surveillance display features ultra-fast refresh rate with mouse driven navigation and multi-lingual on screen display • High Reliability Surveillance Hard Disk Drive with MPEG4 video compressi
ページ7に含まれる内容の要旨
Table of Contents Table of Contents Getting Started ..............................................................................................................................................9 L19LD800 Series - Front.............................................................................................................................10 L19LD800 Series - Back ............................................................................................................................
ページ8に含まれる内容の要旨
Table of Contents Table of Contents Archive Menu ..............................................................................................................................................39 Camera Menu .............................................................................................................................................40 Display Setup Menu.............................................................................................................................
ページ9に含まれる内容の要旨
Getting Started Getting Started The system comes with the following components: 1 x LCD & DVR COMBO UNIT 1 x POWER ADAPTOR WITH PRE-INSTALLED HDD 1 x 10’ ETHERNET CABLE 1 x HARDWARE MANUAL 1 x SOFTWARE MANUAL 1 x QUICK START GUIDE REMOTE CONTROL 1 x INSTALL CD CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE. 9
ページ10に含まれる内容の要旨
L19LD800 Series - Front L19LD800 Series - Front 1 2 3 4 5 6 7 11 12 8 9 10 13 14 15 16 18 19 20 21 22 17 1. USB - Two USB 2.0 ports are provided to connect external hard disk drives, optical drives (CDRW / DVDRW) or USB memory stick for archiving video. 2. PTZ - Press the PTZ key to enter the PTZ control mode. 3. RECORD - Press the key to start scheduled recording. Pressing the key again toggles stop and start. 4. STOP - Press the key to return to the live screen mode whil
ページ11に含まれる内容の要旨
L19LD800 Series - Front L19LD800 Series - Front 1 2 3 4 12 5 6 7 8 9 10 11 14 22 13 15 16 17 18 19 20 21 11. STATUS INDICATOR LEDs - LEDs will illuminate when the following occur: • IR RECEIVER (does not illuminate) - Receives the signal from the IR transmitter on the Remote Control. • RECORD LED - Illuminates when the unit is in Record Mode. • NETWORK LED - Illuminates when a remote user is connected to the unit (Network Access). • POWER LED - The Power LED illuminates when t
ページ12に含まれる内容の要旨
L19LD800 Series - Front L19LD800 Series - Front 1 2 3 4 5 6 7 11 12 8 9 10 13 14 15 16 18 19 20 21 22 17 18. NAVIGATION & VOLUME CONTROLS – The Volume Controls are used in Live Viewing & Playback Modes: • VOL + (RIGHT) Press the VOL + (Volume UP) key to increase the volume level in the live screen 16 mode. • VOL– (LEFT) Press the VOL– (Volume DOWN) key to decrease the volume level in the live screen mode. Navigation controls are used in Menu and PTZ Modes: • MENU MODE - The
ページ13に含まれる内容の要旨
L19LD800 Series - Front L19LD800 Series - Front 1 2 3 4 5 6 7 11 12 8 9 10 13 14 15 16 18 19 20 21 22 17 22. PTZ - ALTERNATE FUNCTIONS – The following buttons are used in PTZ Mode: • ZOOM IN - Press to zoom in. • ZOOM OUT - Press to zoom out. • FOCUS NEAR - Press to control the focus (near). • FOCUS FAR - Press to control the focus (far). • IRIS CLOSE - Press to control the iris close. • IRIS OPEN - Press to control the iris open. • SET - Press to store the preset while. • R
ページ14に含まれる内容の要旨
L19LD800 Series - Back L19LD800 Series - Back 1 2 3 4 5 6 1. ALARM I/O & RS-485 TERMINAL – Connection point for external devices: • The Alarm Block is used to connect devices such as a motion sensor, door/alarm sensor, or time lapse VCR for Alarm Recording. Refer to appendicies for Alarm Block Configuration. Alarm devices are not included. • The RS-485 Block is used to connect devices such as a keyboard or a PTZ (Pan/Tilt/Zoom) Camera. Keyboards and PTZ Cameras are not included.
ページ15に含まれる内容の要旨
Cable Channel & VESA Standard Stand Cable Channel & VESA Standard Stand The L19LD800 Series stand comes with a built in cable channel to easily organize and conceal wiring. The stand can be removed to mount the monitor directly to other VESA standard mounting brackets. Connect the Power Cable, Cameras, Ethernet Cable and any Alarm Devices to the System by running the cables through the hole in the stand before connecting to the Observation System. DEVICE CONNECTIONS (Stand Conne
ページ16に含まれる内容の要旨
Remote Control Remote Control Listed below is a quick reference for the Remote Control. All Buttons described above function the same as the Front Panel buttons. POWER - Turns the RECORD - Press the LCD Monitor power button to start scheduled ON/OFF recording. Pressing the button again toggles CHANNEL BUTTONS - stop and start. Press to select a specific camera by number VIEW – Press to view the Cameras. SEQ - Turns camera Sequence Mode ON/OFF. LCD – Opens the LCD
ページ17に含まれる内容の要旨
Camera Installation Camera Installation Before you install the camera*, carefully plan where and how it will be positioned, and where you will route the cable that connects the camera to the System. Installation Warnings: • Select a location for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight. • Plan the cables’ route so that it is not close to power or telephone
ページ18に含まれる内容の要旨
Connecting DIN Cameras Connecting DIN Cameras 1. Connect the female end of the supplied extension cable to the camera. NOTE: Confirm that the arrows on the DIN Camera Cable and the DIN Extension cable are pointed together when connecting the cable. If the pins in the DIN Cable are bent, the Camera will NOT function. 2. Connect the male end of the supplied 100’ extension cable to an open DIN camera input (CAM 1~4) on the back of t
ページ19に含まれる内容の要旨
Connecting BNC Cameras Connecting BNC Cameras 1. Connect the 60ft Extension cable to the Camera and Observation System: A. Connect the Barrel Power connector to a power adaptor. B. Connect the BNC connector to an available BNC Port (CAM 5~8) on the monitor C. Connect the Male Power connector to the Camera. D. Connect the BNC connector to the Camera. 2. Connect the Power Adaptor to a wall outlet. IMPORTANT NOTE: The ends o
ページ20に含まれる内容の要旨
Connecting a Mouse Connecting a Mouse Connect a mouse to one of the USB ports located on the front of the unit. Mouse Controls The mouse behaves in the same way as a PC mouse - using Left Click, Right Click and Wheel Rotation: Left Click: Right Click: • Click the left mouse button to • Clicking the right mouse button select an item. during live monitoring displays a Quick Links Menu. • When in one of the multi-view formats (i.e. 2x2 or 3x3 view),
