ページ1に含まれる内容の要旨
4-CHANNEL NETWORK TRIPLEX
DIGITAL VIDEO RECORDER
with VGA Output
Instruction Manual
English Version1.0
MODEL:
DXR43000 Series
4 Channel Network DVR
www.lorexcctv.com
Copyright © 2005 Strategic Vista International Inc.
ページ2に含まれる内容の要旨
The DVR converts analog video into digital format and records them on a removable hard disk drive. Digital video allows you to quickly access and search for a specific time segment or event which has been recorded. This system features three different quality settings providing recording capability depending on your hard drive unit. To learn more about this system or to find out more about our products available, please visit our website at : www.lorexcctv.com CAUTION RISK OF ELECTRIC
ページ3に含まれる内容の要旨
NOTE This equipment has been certified and found to comply with the limits regulated by FCC, EMC and LVD. Therefore, it is designed to provide reasonable protection against interference and will not cause interference with other appliance usage. However, it is imperative that user follows this manual’s guidelines to avoid improper usage which may result in damage to the unit, electrical shock and fire hazard or injury. In order to improve the feature functions and quality of this produ
ページ4に含まれる内容の要旨
CONTENTS 1 GENERAL PRECAUTIONS ......................................................................................1 2 CAUTIONS AND DVR FEATURES ..........................................................................3 3 SYSTEM INCLUDES: ...............................................................................................5 4 GETTING STARTED.................................................................................................6 5 DESCRIPTION OF PARTS AND FUNCTIONS .
ページ5に含まれる内容の要旨
1 GENERAL PRECAUTIONS Read Instructions All of the safety and operating instructions should be read and understood before the product is used. Retain Instructions The safety and operating instructions should be retained for future reference. Heed Warnings All warnings on the product and the instruction manual should be followed. Follow Instructions All operating and usage instructions should be followed for optimal performance Cleaning Disconnect this video product from the power su
ページ6に含まれる内容の要旨
Overloading To avoid the risk of fire and electric shock, do not plug this product into an over- loaded power supply. Object and Liquid Entry Never push objects into the openings of this product as they may touch dangerous voltage points that may result in fire or electric shock. Never spill a liquid of any kind on this product. Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to voltage or other hazards. Refer all servicing to qua
ページ7に含まれる内容の要旨
Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. Wall or Ceiling Mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer. Heat The pro
ページ8に含まれる内容の要旨
• Recording Speed: 60 fields/sec • Security password protection • On Screen Display and Real Time Clock Function • Remote Control as well as Main Panel operation • Supports 20 ~300 GB HDD • Quick Multiple Search capability • Viewing options: Quad, Sequential, PIP, Full Screen • Supports Pan/Tilt control (Pelco D Protocol): Channel 1 only. • Alarm terminal block • Triplex Mode ( Live mode, Playback mode, Recording mode ) • Firmware Update Function (via USB connection) Note: MINIMUM S
ページ9に含まれる内容の要旨
3 SYSTEM INCLUDES: • (1) 4 CHANNEL DVR • Optional (1) HDD, 20~300 GB • (2) KEYS FOR CARTRIDGE • (4) CABLES • (1) POWER ADAPTER AND CORD • (1) OWNER’S MANUAL • (1) NETVIEWER SOFTWARE CD 4 CHANNEL DVR Your system may include a HDD with a capacity between 20 ~ 300 GB (HDD) depending on the system you purchased. 2 KEYS FOR CARTRIDGE OWNER’S MANUAL SOFTWARE CD CHECK YOUR PACKAGE TO MAKE SURE THAT YOU RECEIVED THE COMPLETE SYSTEM, INCLUDING THE COMPONENTS SHOWN ABOVE. 5
ページ10に含まれる内容の要旨
4 GETTING STARTED 1. Connect the AC Power Cord to the Power Adapter and plug it into an electrical outlet. 2. Connect up to 4 cameras to the BNC video inputs on the back of the DVR. 3. Plug in the power adapter to the back panel. The Red LED indicator will illuminate and the DVR will be in the standby mode 4. The following messages appear when the power is ON successfully. Dynamic IP Request OK *** MASTER HDD DETECT *** POWER ON CHECK _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
ページ11に含まれる内容の要旨
*** NETWORK INFOMATION *** MAC ADDRESS : XX XX XX XX XX XX IP ADDRESS : 192 . 168 . 001 . 150 SUBNET MASK : 255 . 255 . 255 . 000 GATEWAY : 192 . 168 . 001 . 001 PORT : 5000 Note: The above message indicates the network values set in the DVR. Note: The settings for the network values can be changed in the MAIN MENU SETTINGS. 7
ページ12に含まれる内容の要旨
5 DESCRIPTION OF PARTS AND FUNCTIONS 5.1 FRONT PANEL CABINET FOR CARTRIDGE CASING FUNCTION BUTTONS DISPLAY BUTTONS 8
ページ13に含まれる内容の要旨
5.1.1 CABINET FOR CARTRIDGE CASING The cabinet is located on the front panel behind a panel which flips forward to reveal the removable cartridge casing (contains the HDD). KEYHOLE LED LIGHTS HANDLE KEYHOLE Insert the key into the keyhole and turn to lock or unlock the cabinet. LED Indicator Lights Indicator lights for the power and the HDD access HANDLE Lift the handle and pull to slide the Cartridge Casing out of the DVR. 5.1.2 FRONT PANEL – FUNCTION
ページ14に含まれる内容の要旨
1. ARROW/CHANNEL BUTTONS ( CH1, CH2, CH3, CH4) These buttons perform the following functions: a) Displays a picture in Full Screen In Quad 1 mode: Select the Channel 1 button and hold it for 2-3 seconds to view Camera 1 in Full Screen. To view the other camera locations, press CH2, CH3, and CH4 buttons. b) Freezes a specific camera. You have the option to freeze images in Full or Quad screen mode In Quad Screen mode: Press a channel button to freeze this channel in the Quad screen
ページ15に含まれる内容の要旨
5. PIP / COPY BUTTON (Picture in Picture) NOTE The PIP function is only accessible by the remote control. The PIP Button allows you to view two camera locations simultaneously, one being the main channel, the other being viewed as a sub-picture. Dual PIP can also be selected, which displays two sub-pictures as illustrated below. To change between Single PIP and Dual PIP, repeatedly press the PIP button. DU DU DUA A AL L L P P PI I IP P P SI SI SIN N NG G GL L LE E E PI PI PIP P P The
ページ16に含まれる内容の要旨
6. SEARCH / EVENT BUTTON a) SEARCH: Pressing this button brings up the Search menu, which allows you to quickly find recordings. b) EVENT: Pressing this button brings up a list of up to 3000 Events, including Power, Loss and Alarms. You can scroll through Events using the ▲ and ▼ keys, and navigate between Pages of Events using the ◄ and ► keys. Press the QUAD / ENTER Button to exit the Event list. The following letters represent the different types of Events that you may find liste
ページ17に含まれる内容の要旨
TIMER: The LED will be ON when the schedule recording is set (i.e. when you set up the DVR to record automatically in SCHEDULE REC SET, see THE MAIN MENU SETTINGS, page 19). ALARM: LED will be ON when the ALARM or MOTION function is set to ON. When the ALARM or MOTION function is ON, the LED will blink as an Alarm is being triggered. HDD FULL: If the OVERWRITE menu is set up, the LED will not blink in any case. The LED blinks if the HDD has less than 1GB of storage space, and remains
ページ18に含まれる内容の要旨
5.1.4 FRONT PANEL – HARD DRIVE AND USB CONNECTIONS OPEN USB HDD 14
ページ19に含まれる内容の要旨
5.2 BACK PANEL (DESCRIPTION OF PARTS AND FUNCTION continued) VGA OUT RS-232 VIDEO IN VIDEO OUT AUDIO IN / OUT 1. VIDEO IN Channel 1-4 camera video input BNC port. 2. VIDEO OUT Composite Output for connecting to another Monitor or VCR. 3. AUDIO IN / OUT. Audio input / output through line 4. ETHERNET. Available to view live and recorded data on the HDD through the Internet or a LAN 5. VGA OUT. Output for connecting to a Computer Monitor 6. RS-232. Conn
ページ20に含まれる内容の要旨
To DC-12V power source RS-485 (–) RS-485 (+) ALARM IN COM ALARM OUT SLAVE IDE 1. ALARM IN These terminals are used to connect external motion sensors, door / window contacts, etc. 2. COM 3. ALARM OUT Send a signal to a VCR or other devices in an Alarm or motion situation. 4. RS - 485 ( +, –) Connect the PTZ control wires to these terminals 5. SLAVE IDE Output for connecting to a Slave Monitor or VCR. 6. POWER SOURCE Connects to a Power Plug (DC -12V)
