ページ1に含まれる内容の要旨
DVD VIDEO RECORDER
DR-MV150B
RM-SDRMV150A RM-SDRMV150A
For Customer Use :
Enter below the Model No. and
Serial No. which are located on the
rear of cabinet. Retain this
information for future reference.
Model No.
Serial No.
INSTRUCTIONS
LVT2016-001D
[J]
ページ2に含まれる内容の要旨
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) CAUTION: NO USER-SERVICEABLE PARTS INSIDE This product employs a Laser System. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future refer- ence. Should the unit require maintenance, contact This lightning flash with arrowhead symbol within an equilateral triangle is intended t
ページ3に含まれる内容の要旨
FCC WARNING: This equipment may generate or CAUTION concerning the Power Cord use radio frequency energy. Changes or modifica- Most appliances recommend they be placed upon tions to this equipment may cause harmful interfer- a dedicated circuit; ence unless the modifications are expressly approved in the instruction manual. The user could That is, a single outlet circuit which powers only that lose the authority to operate this equipment if an appliance and has no additional outlets or branch ci
ページ4に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the
ページ5に含まれる内容の要旨
Playing a DivX Movie File . . . . . . . . . . . . . . .29 INTRODUCTION Playing an Audio CD or MP3/WMA files . . . .30 Viewing a JPEG files . . . . . . . . . . . . . . . .31-32 About the Symbol Display . . . . . . . . . . . . .2 Symbol Used in this Manual . . . . . . . . . . . . . .2 RECORDING Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .2 Moisture Condensation . . . . . . . . . . . . . . . . . .2 Recordable and Playable Discs . . . . . . . . . . .3 About DVD recording . . . . .
ページ6に含まれる内容の要旨
Introduction To ensure proper use of this product, please read Notes on Discs this owner’s manual carefully and retain for future reference. Handling Discs Do not touch the playback side of the disc. Hold the About the Symbol Display disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc. “ ” may appear on your TV display during operation and indicates that the function is not permitted by this unit or specific media. Symbol Used in this Manual
ページ7に含まれる内容の要旨
Recordable and Playable Discs DVD-RW (DVD - ReWritable) DVD-RW discs can be formatted for VR mode recording or Video mode recording. These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the same Disc. [VR mode] Recordings can be extensively edited Playable only on VR mode compatible players (after finalization) [Video mode] Playable on regular DVD players (after finalization) Limited editing features DVD-R (DVD - Recordable) These Discs can be
ページ8に含まれる内容の要旨
Playable Discs DVD (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented Video CD (VCD) (8 cm / 12 cm disc) VIDEO CDs or CD-Rs/CD-RWs in VIDEO CD/Super VIDEO CD format Audio CD (8 cm / 12 cm disc) Music CDs or CD-Rs/CD-RWs in music CD format that can be purchased CD-R/CD-RW (8 cm / 12 cm disc) CD-R/CD-RW discs that contain audio titles, MP3, WMA or JPEG files. Notes: • Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW
ページ9に含まれる内容の要旨
Restrictions on video recording •You cannot record copy-protected video using this recorder. Copy-protected video includes DVD-Video discs and some satellite broadcasts. If copy-protected material is encountered during a recording, recording will pause or stop automatically and the following message will be displayed on-screen will be displayed on- screen. • When the program which set a timer REC was Copy Protect, recording is not possible. • Video that is ‘copy-once only’ can only be recorded u
ページ10に含まれる内容の要旨
Front Panel ab c d e fgh i j k l mn o p Lights when the Recorder is in playing mode a Disc Tray (DVD deck) or flashes when search mode. Insert a disc here. The VCR deck is selected. VCR b Z OPEN/CLOSE Opens or closes the disc tray. Indicates when the recorder is in timer recording or a timer recording is c Cassette Compartment (VCR deck) programmed. Insert a video cassette here. A VHS tape is inserted in the VCR deck. d Z EJECT The Recorder is recording. Ejects the tape in the VCR deck. REC
ページ11に含まれる内容の要旨
Remote Control EJECT, OPEN/CLOSE (Z) DISC MENU/LIST - Opens and closes the disc tray. Accesses menu on a DVD disc, Title - Ejects the tape in the VCR deck. List or Playlist menu. 0-9 numerical buttons bBvV (left/right/up/down) - Selects numbered options in a menu. Selects menu options. - Inputs channel numbers. ENTER ( ) DASH (-) Confirms menu selections. a Enters a channel number for multiple DISPLAY channels such as 2-1, 2-2, etc. Accesses On-Screen Display. AUX Displays information of curren
ページ12に含まれる内容の要旨
Note: Remote Control Function If you change the batteries of the Remote Control Remote Control A/B/C/D Code Switching with A, B or D code, the remote control code is set to C automatically. In this case, you should reset The remote control is capable of controlling four the remote control code described above. JVC video units independently. Each of the units can respond to one of four codes (A, B, C or D). The remote control is preset to send C code sig- nals because your unit is initially set t
ページ13に含まれる内容の要旨
Rear Panel ab c d e f ghijk a ANTENNA IN (FROM ANT.) g ANTENNA OUT (TO TV) Connect the antenna to this terminal. Connect to a TV with ANTENNA coaxial inputs. This connection does not provide b OPTICAL (DIGITAL AUDIO OUTPUT) DVD/VHS playback, Tuner Output, or On Connect to digital (optical) audio equipment. Screen Menu capability. It only provides Antenna pass through to the TV. c COMPONENT OUTPUT (Y PB PR) Connect to a TV with Y PB PR inputs. h COAXIAL (DIGITAL AUDIO OUTPUT) Connect to digita
ページ14に含まれる内容の要旨
Hookup and Settings Depending on your TV and other equipment a Antenna Antenna there are various ways you can connect the recorder. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary for additional connection informa- OR OR tion. Notes: • Make sure the Recorder is connected directly to the TV and tune the TV to the correct video input channel. • Do not connect the Recorder’s AUDIO OUTPUT jack to the phono in jack (record deck) of your audio system. • Do no
ページ15に含まれる内容の要旨
Audio connection Connections to your TV Connections to your TV Connect the Left and Right AUDIO OUTPUT jacks on • Make one of the following connections, depending the Recorder to the audio left/right in jacks on the TV on the capabilities of your TV. using the supplied audio cables (A1 or A2). • One of these connections must be made (or HDMI) Rear of TV in order to view DVD/VHS playback, Tuner, or On S-VIDEO COMPONENT/PROGRESSIVE SCAN AUDIO INPUT VIDEO INPUT INPUT Screen Menu functions." Y R
ページ16に含まれる内容の要旨
HDMI connection HDMI compatible TV HDMI If you have a HDMI TV or monitor, you can connect it to this recorder using a HDMI cable. 1. Connect the HDMI OUTPUT jack on the recorder H to the HDMI INPUT jack on a HDMI compatible TV or monitor (H). 2. Set the TV’s source to HDMI (refer to TV’s Owner’s manual). Notes: • This unit will only provide up converted SD resolutions when a HD resolution has been selected for the HDMI output. HDMI has the capability to support standard, enhanced, • If your TV
ページ17に含まれる内容の要旨
Connection to an Amplifier Connection to an Amplifier Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/Pro Rear of Recorder Logic Connect the Left and Right AUDIO OUTPUT jacks on the Recorder to the audio left and right in jacks on your amplifier, receiver, or stereo system using the audio cables (A) supplied. Connecting to an amplifier equipped with two chan- nel digital stereo (PCM) or to an Audio/Video receiv- er equipped with a multi-channel decoder (D
ページ18に含まれる内容の要旨
Connecting a Digital Accessory Audio/Video (A/V) Connecting a Digital Accessory Audio/Video (A/V) Recorder Recorder Camcorder Camcorder Connections to Connections to Connect the INPUT 1 or AV IN 2 jacks on the Use a DV cable (not supplied) to connect the DV Recorder to the audio/video out jacks on your acces- in/out jack of your DV Digital Camcorder to the front sory component, using the optional audio/video panel DV IN jack of this Recorder. cables. (Refer to page 38 for [Recording from Notes
ページ19に含まれる内容の要旨
5. Enter the necessary information for year, date and Initial Setup Wizard Initial Setup Wizard time. After the STANDBY/ON is pressed for the first time to turn on the unit or after factory setting (See page 18), the Initial Setup Wizard function sets the Language, Channels and Clock step-by-step until the setup is complete. 1. Use v / V to select a language for the Setup menu and information display then press ENTER. b / B (left/right): Moves the cursor to the previous or next column. v / V (up
ページ20に含まれる内容の要旨
Easy Menu Using the Home Menu Using the Home Menu • Dubbing: Displays [Dubbing] menu. (See page From the Home Menu screen you can access all the 37) Media for playback and recording of the recorder. • Disc Manager: Displays Disc setup menu. (See page 22) 1. Press HOME and the Home menu appears. 2. Use b / B to select the desired main option. • Rec. Mode: Displays Record Mode setup menu. (See page 21) 3. Use v / V to select the desired Sub option then press ENTER to confirm your selection. • D
