ページ1に含まれる内容の要旨
HD Digital Recorder
User’s Manual
iHDR-5200C
The default password is 0000.
ページ2に含まれる内容の要旨
Notice English Thank you for purchasing a HUMAX product. Please read this user’s manual carefully to be able to safely install, use and maintain the product at maximum performance. Keep this user’s manual next to your product for future reference. The information in this user’s manual is subject to change without notice. Copyright (Copyright © 2010 HUMAX Corporation) Not to be copied, used or translated in part or whole without HUMAX’s prior consent in writing except approval of ownership of
ページ3に含まれる内容の要旨
Notice ‘WEEE’ Instructions This product should not be disposed with other household wastes at the end of its working life. Please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. This will prevent possible harm to the environment or human health from uncontrolled waste disposal. Domestic users: Please contact either the retailer where you purchased this product or their local government office for details of where a
ページ4に含まれる内容の要旨
Contents English Notice 1Preferences 47 Parental Control 47 Quick Start Guide 4 Language Setting 48 1. Checking Accessories 4 Setting Power On/Off Timer 48 2. Product Overview 4 Video Setting 49 3. Connections 8 Audio Setting 50 4. Powering On 11 Screen Display 51 5. First Installation Wizard 12 6. Menu Overview 14Installation 52 Channel Search 52 Basic Operation 15 Software Update (OTA) 53 Changing Channels 15 Factory Default 54 Volume / Mute / Audio 15 Display Format / Resolution 16System 55 P
ページ5に含まれる内容の要旨
Quick Start Guide 1. Checking Accessories Quick Start Guide User's manual Remote Control CD Manual & HDMI Cable & Batteries Quick Start Guide SCART Cable RF Cable Ethernet Cable Note: The accessories may vary according to area. 2. Product Overview Front Panel STANDBY Switches between operation and Status Display standby modes. BACK TV/RADIO OK Smartcard Slot Arrows USB Port MENU GUIDE Connect a USB storage device. LED Indicator (for MP3 or JPEG) (Standby: Red, Operation: Blue) Note: The image
ページ6に含まれる内容の要旨
Quick Start Guide English Inserting the Smartcard 1. Open the flap on the front panel to expose the card slot. 2. Hold Smartcard horizontally with the electronic chip facing downwards. 3. Insert the Smartcard into the slot. Smartcard Rear Panel TV SCART CABLE IN Connect to the TV using a SCART Connect an antenna cable. cable. CABLE OUT VCR SCART Connect to the TV or VCR using Connect to the VCR or DVD using a an antenna cable. SCART cable. ON/OFF Powers on/off. VIDEO SPDIF (Optical) ETHERNE
ページ7に含まれる内容の要旨
Quick Start Guide Remote Control MUTE Mutes audio. STANDBY Switches between operation and standby modes. 1 MODE Changes the mode of remote. NUMERIC (0-9) TV Portal Not available for this product. MENU Displays the main menu. Playback Play, II Pause, Stop, Record, Control Rewind, Fast Forward, Previous, Next, I I Buttons Instant Replay, Skip 2 COLOUR Colour keys for interactive applications. Buttons 3 MEDIA Displays the media list. GUIDE Displays the programme guide.
ページ8に含まれる内容の要旨
Quick Start Guide English +/- Adjusts the audio volume. P/ Changes the channel or page. LIST Displays the channel list. i (Information) Displays the channel and programme information. OPT+ Displays the channels attributes. AUDIO Displays the audio list. SUBTITLE Displays the subtitle language list. TV/RADIO Switches between TV and radio modes. TEXT Enters the digital text service. SOURCE Switches between the input sources from SCART. SLEEP Sets the sleep timer. V-FORMAT Sets the resolution o
ページ9に含まれる内容の要旨
Quick Start Guide 3. Connections This section describes how to connect your product to match your particular devices setup and to gain optimum signal quality. The product provides various interfaces to connect to the TV, VCR or other devices. Select the most appropriate procedure depending on the device you have. Note: If you encounter any problems setting up your product, please contact your local retailer or HUMAX Customer Helpline. AUDIO TV SCART DVI for TV HDMI DVI Connecter RCA Cable SCAR
ページ10に含まれる内容の要旨
Quick Start Guide English Connecting the Cable TV Line Connect an antenna cable from your cable TV network to CABLE IN connector. Connecting the TV and VCR You can select one of the following connections depending on the equipment you have. TV with the HDMI connector; For the best picture quality, connect the product and TV using an HDMI cable. TV with the DVI connector; For very good picture quality, connect the product and TV using an HDMI cable and an HDMI-to-DVI converter for video and an
ページ11に含まれる内容の要旨
Quick Start Guide Connecting the Network Connecting to the LAN; Connect one end of the Ethernet cable to the product and the other end to the LAN router. Connecting to the Wi-Fi (Wireless LAN); (Reserved for future use.) You can connect the network via the Wi-Fi access point or DSL/cable modem. 1. Plug in the wireless USB dongle to the USB port. (Separate purchase required) 2. Set the options for the Wi-Fi. Network Name (SSID): Select the network name of your Wi-Fi access point from the list
ページ12に含まれる内容の要旨
Quick Start Guide English 4. Powering On 1. Connect the power cord of the product to a wall outlet. 2. Ensure the ON/OFF switch at the rear of the product is switched to ON. 3. Power on by pressing the STANDBY button on the remote control or the STANDBY button at the front of the product. Note: To control the product please make sure that the PVR mode is selected on the remote control. 11
ページ13に含まれる内容の要旨
Quick Start Guide 5. First Installation Wizard When powering on your product for the first time after purchase or performing the factory default in menu, the installation wizard will operate automatically. Note: If you exit the installation wizard without fully completing the channel searching procedure, you may not have all of the channels available. In this case, you can use the Settings > Installation menu to search for more channels. 1. Language Select your language. 2. Display Set the
ページ14に含まれる内容の要旨
Quick Start Guide English Save the found channels when the search is complete. 4. Configure Network Make sure that the LAN cable is connected to the Ethernet port or the wireless USB dongle is enabled. Configure the network setting. Note: The Wi-Fi network is currently not supported. (Reserved for future use.) 5. Result The result of the Installation Wizard is shown. Select Finish to exit the wizard. 13
ページ15に含まれる内容の要旨
Quick Start Guide 6. Menu Overview Preferences • Parental Control • Language • Time • Video • Audio • Recording • Screen Display Edit Channels • Edit Favourite List • Edit Channel List • Favourite Ch Numbering Channel List • Hide Recent List TV Guide Installation • Channel Search • IRDETO Software Update Video • Factory Default Music System • System Information • Signal Detection Photo • Power Management • Conditional Access Settings • Mail Messages • Data Storage • Network How to Navigate Displ
ページ16に含まれる内容の要旨
Basic Operation English Changing Channels You can change the channels in several ways. Press the P/ button. Enter the channel number directly. (0-9) Go to the channel list or TV guide and select a channel. Note: • Press the TV/RADIO button to switch between TV and radio channels. • Press the BACK button to return to the previous channel. Volume / Mute / Audio To adjust the audio volume, press the +/- button. To mute the audio temporarily, press the MUTE button. Setting Audio Options
ページ17に含まれる内容の要旨
Basic Operation Display Format / Resolution Setting Display Format Press the WIDE button to set the display format according to the screen ratio. Each time you press this button, the value changes. Screen ratio 4:3: Auto – Letterbox 16:9 – Letterbox 14:9 – Centre Screen ratio 16:9: Auto – Full – Zoom Note: Refer to Setting Display Format for details. Display Setting Resolution Press the V-FORMAT button to set the resolution of the screen. Each time you press this button, the value cha
ページ18に含まれる内容の要旨
Basic Operation English Programme Information (i-plate) The i-plate is an information banner that is displayed for a certain period of time whenever you change channels. Press the i button while watching a progamme to display the i-plate. Press the EXIT button to hide. Playing time Icons Channel number and name Current time and date Group name Programme name Display Navigation mode Viewing detailed programme information Press the i button again while the i-plate is displayed. Viewing pre
ページ19に含まれる内容の要旨
Basic Operation Sleep Timer Press the SLEEP button to set the automatic turn off time. Each time you press this button, the value changes. 10 - 20 - 30 - 60 - 90 - 120 minutes Display Subtitle You can select the subtitle language when subtitle information is provided. 1. Press the SUBTITLE button. 2. Select the subtitle language. 3. Select Off to make the subtitle disappear. 4. Press the OK button. Note: You can choose to always display the subtitle when available. Display Select Confirm 18
ページ20に含まれる内容の要旨
Basic Operation English Option You can set the options for the watching channel. 1. Press the OPT+ button. 2. Select an option. Favourite: Select the favourite group to add the channel. Lock: Select On or Off. 3. Select OK to save and exit. Display Select Confirm Teletext Teletext is a free service broadcast which gives the latest information on news, weather and many other topics. You can use interactive services in teletext mode. All teletext supporting channels have the teletext icon on
