ページ1に含まれる内容の要旨
HD Digital Television Recorder
User’s Manual
HDR-7500T
The default password is 0000.
ページ2に含まれる内容の要旨
Notice English Thank you for purchasing a HUMAX product. Please read this user’s manual carefully to be able to safely install, use and maintain the product at maximum performance. Keep this user’s manual next to your product for future reference. The information in this user’s manual is subject to change without notice. Copyright (Copyright © 2011 HUMAX Corporation) Not to be copied, used or translated in part or whole without HUMAX’s prior consent in writing except approval of ownership of
ページ3に含まれる内容の要旨
Notice Note Indicates additional information to make the user aware of possible problems and information of any importance to help understand, use and maintain the installation. Disposal Instructions This product should not be disposed with other household wastes at the end of its working life. Please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. This will prevent possible harm to the environment or human health fro
ページ4に含まれる内容の要旨
Contents English Renaming Files 42 Notice 1 Creating Folder 42 Quick Start Guide 4 Moving / Copying Files 43 1. Checking Accessories 4 2. Product Overview 4 Playing Files 44 3. Connections 8 Music Player 45 4. Powering On 12 Editing Files 45 5. First Installation Wizard 13 6. Menu Overview 15 Photo Slideshow 46 Slide Mode 47 Basic Operation 16 Editing Files 47 Changing Channels 16 Volume / Mute / Audio 16 HUMAX TV Portal 48
ページ5に含まれる内容の要旨
Quick Start Guide 1. Checking Accessories Quick Start Guide IceTV Flyer User's manual Remote Control CD Manual IceTV Flyer / Batteries / Quick Start Guide (Quick Manual) HDMI Cable RCA Cable Note: The accessories may vary according to area. 2. Product Overview Front Panel STANDBY VOL+/- Switches between operation P+/- and standby modes. USB Port Connect a USB storage device. Note: The image shown may differ from the actual product. 4
ページ6に含まれる内容の要旨
Quick Start Guide English Rear Panel ANTENNA IN ETHERNET Connect to TV antenna. COMPONENT(YPbPr) OUT Service port ANTENNA OUT Connects to the TV or VCR USB Port Connects to the TV or VCR using a component cable. Connect a USB storage device. using an RF cable. ON/OFF SPDIF VIDEO HDMI Connect to the audio Connect to the TV or VCR using an Connect to the TV using system using an S/PDIF RCA cable. an HDMI cable. cable. (digital audio) AUDIO Connect to the TV or VCR using an RCA cable. Note: T
ページ7に含まれる内容の要旨
Quick Start Guide Remote Control MUTE Mutes audio. STANDBY Switches between operation and standby modes. 1 MODE Changes the mode of remote. NUMERIC TV Portal Enters HUMAX TV Portal. MENU Displays the main menu. Playback Play, II Pause, Stop, Record, 2 Control Rewind, Fast Forward, I Previous, I Next, Buttons Instant Replay, Skip 3 COLOUR Colour keys for interactive applications. Buttons MEDIA Displays the media list. GUIDE Displays the programme guide. ARROW Moves
ページ8に含まれる内容の要旨
Quick Start Guide English +/- Adjusts the audio volume. P/ Changes the channel or page. LIST Displays the channel list. i (Information) Displays the channel and programme information. OPT+ Displays the channels attributes. AUDIO Displays the audio list. SUBTITLE Displays the subtitle language list. TV/RADIO Switches between TV and radio modes. TEXT Enters the digital text service. SOURCE Switches between the input sources. SLEEP Sets the sleep timer. V-FORMAT Sets the resolution of video. WI
ページ9に含まれる内容の要旨
Quick Start Guide 3. Connections This section describes how to connect your product to match your particular devices setup and to gain optimum signal quality. The product provides various interfaces to connect to the TV, VCR or other devices. Select the most appropriate procedure depending on the device you have. Note: If you encounter any problems setting up your product, please contact HUMAX Customer Helpline. AUDIO COMPONENT IN HDMI DVI for TV DVI Connecter RCA Cable COMPONENT Cable HDMI Ca
ページ10に含まれる内容の要旨
Quick Start Guide English Connecting the Antenna Connect the aerial to the ANTENNA IN. Connecting the TV You can select one of the following connections depending on the device you have. TV with the HDMI connector; For the best picture quality, connect the product and TV using a HDMI cable. TV with the DVI connector; For very good picture quality, connect the product and TV using a HDMI cable and a HDMI-to-DVI converter for video. for Audio. TV with the Component(YPbPr) connector; F
ページ11に含まれる内容の要旨
Quick Start Guide Connecting the Network Connecting to the LAN; Connecting to the Wi-Fi (Wireless LAN); 1. Power off the receiver and disconnect the Ethernet cable. 2. Insert the HUMAX Wi-Fi dongle into an USB port and power on the receiver. 3. Go to MENU > Settings > System > Internet Setting > Configure Wi-Fi. Note: If Configure Wi-Fi is disabled, make sure that the Ethernet cable is disconnected and check if the HUMAX Wi-Fi dongle is inserted correctly into an USB port on t
ページ12に含まれる内容の要旨
Quick Start Guide English 6. Select Password and press the OK button. Enter the WEP key/Password of you router. (This information is normally written on your router.) 7. Press the YELLOW button to complete. 8. Select APPLY and press the OK button. 9. When the connection is complete, press the OK button and press the EXIT button to return to the menu. Note: lower the quality of service. function or respond. Go to www.humaxdigital.com/au to purchase a HUMAX Wi-F
ページ13に含まれる内容の要旨
Quick Start Guide 4. Powering On 1. Connect the power cord of the product to a wall outlet. 2. Ensure the ON/OFF switch at the rear of the product is switched to ON. 3. Power on by pressing the STANDBY button on the remote control or the STANDBY button at the front of the product. 12
ページ14に含まれる内容の要旨
Quick Start Guide English 5. First Installation Wizard When powering on your product for the first time after purchase or performing the factory default in menu, the installation wizard will operate automatically. Note: If you exit the installation wizard without fully completing the channel searching procedure, you may not have all of the channels available. In this case, you can use the Settings > Installation menu to search for more channels. 1. Region Select the state you currently live
ページ15に含まれる内容の要旨
Quick Start Guide 4. EPG Type Select the EPG Type you want. If you already have an IceTV account or wish to take advantage of the additional features of IceTV, select IceTV. Note: To use the IceTV EPG, connect the receiver to the internet via Ethernet or USB wireless dongle. Refer to Connecting the Network. 5. Result The result of the Installation Wizard is shown. Select Finish to exit the wizard. 14
ページ16に含まれる内容の要旨
Quick Start Guide English 6. Menu Overview Preference Edit Channels Installation TV Guide Video Music Photo System HUMAX TV Portal Settings How to Navigate Displays the main menu Moves among menus or options Selects (Enters) a menu or or Changes or adjusts the option confirms a selection Goes back to the previous screen Exits all On-Screen Display (OSD) screens 15
ページ17に含まれる内容の要旨
Basic Operation Changing Channels You can change the channels in several ways. Press the P/ button. Enter the channel number directly. (0-9) Go to the channel list and select a channel. Note: Press the TV/RADIO button to switch between TV and radio channels. Volume / Mute / Audio To adjust the audio volume, press the +/- button. To mute the audio temporarily, press the MUTE button. Setting Audio Options Audio options are available only when the programme supports multiple audio lan
ページ18に含まれる内容の要旨
Basic Operation English Display Format / Resolution Setting Display Format Press the WIDE button to set the display format according to the screen ratio. Each time you press this button, the value changes. Screen ratio 4:3: Auto – Letterbox 16:9 – Letterbox 14:9 – Centre Screen ratio 16:9: Auto – Pillarbox – Zoom Display Setting Resolution Press the V-FORMAT button to set the resolution of the screen. Each time you press this button, the value changes. 576i - 576p - 720p - 1080i - Ori
ページ19に含まれる内容の要旨
Basic Operation Programme Information (i-plate) The i-plate is an information banner that is displayed for a certain period of time whenever you change channels. Press the i button while watching a progamme to display the i-plate. Press the EXIT button to hide. Playing time Icons Signal strength and quality Channel number and name Current time and date Group name Programme name Display Navigation mode Viewing detailed programme information Press the i button again while the i-plate is disp
ページ20に含まれる内容の要旨
Basic Operation English Sleep Timer Press the SLEEP button to set the automatic turn off time. Each time you press this button, the value changes. 10 - 20 - 30 - 60 - 90 - 120 minutes Display Subtitle You can select the subtitle language when subtitle information is provided. Press the SUBTITLE button to change the subtitle language. Each time you press this button, the value changes. Note: You can choose to always display the subtitle when available. Display Select Confirm 19