ページ1に含まれる内容の要旨
Instruction Manual
EDR1640/1620/920
EDR1640/1620/920
ページ2に含まれる内容の要旨
E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N EDR1640 / 1620 / 920 Instruction Guide 2005 EverFocus Electronics Corp www.everfocus.com All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form or by any means without written permission of the Everfocus Electronics Corporation. Release Date: August 2008 QuickTime is a registered trademark of the Apple Computer, Inc. Windows is a registered trademark of the Microsoft Corporation. Link
ページ3に含まれる内容の要旨
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communicatio
ページ4に含まれる内容の要旨
Non-LPS or TNV output connectors identify the type of circuit, intended cable type or relevant circuit characteristics. (M arking or Instruction) “ CATUION: Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions.” iii
ページ5に含まれる内容の要旨
TABLE OF CONTENTS 1. PRODUCT OVERVIEW .................................................................................................. 1 1.1 FEATURES........................................................................................................................... 1 1.2 SPECIFICATIONS.................................................................................................................. 2 1.3 FRONT PANEL KEYPADS.................................................................
ページ6に含まれる内容の要旨
3.11.4 HDD FULL........................................................................................................................................... 61 3.12 SYSTEM SETUP MENU.................................................................................................... 63 4. RECORDING OVERVIEW.............................................................................................. 66 4.1 INSTANT (N ) RECORDING SETUP ...............................................................
ページ7に含まれる内容の要旨
15.1 TRANSMISSION SETTING .............................................................................................. 133 15.2 REMOTE CONTROL PROTOCOL..................................................................................... 134 APPENDIX A: REMOTE CONTROL................................................................................... 139 APPENDIX B: MOUSE INSTALLATION ........................................................................... 140 APPENDIX C: ALARM BOARD CONFIGUR
ページ8に含まれる内容の要旨
Safety Warning WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Press the STOP key to stop playing back. Note: This is a class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures. Notice: The information in this manual was current when published. The manufacturer reserves the right to revise and improve its products. All specifications are therefore subj
ページ9に含まれる内容の要旨
Safety Precautions (1 ) Refer all work related to the installation of this product to qualified service personnel or system installers. Do not block the ventilation opening or slots on the cover. Do not drop metallic parts through slots. This could permanently damage the appliance. If this does happen, turn the power off immediately and contact qualified service personnel for service. Do not attempt to disassemble the appliance. There are no user-serviceable parts inside. To prevent electri
ページ10に含まれる内容の要旨
Safety Precautions (2 ) Read Instructions — All the safety and operating instructions should be read before the unit is operated. Retain Instructions — The safety and operating instructions should be retained for future reference. Warnings — All warnings on the unit and in the operating instructions should be adhered to. Follow Instructions — All operating and user instructions should be followed. Cleaning — Unplug the unit from the outlet before cleaning. Do not use liquid cleaners or aerosol
ページ11に含まれる内容の要旨
Chapter 1 1. Product Overview The EDR1640/1620/920 DVR’s are the industry’s first full-featured digital video recorder designed specifically for use within the CCTV security industry. EDR1640/1620/920 DVR’s incorporates all the benefits of digital video recording, is simple to install, and operates just like a VCR. Highly efficient compression technology and superior resolution of recorded images make the Digital Video Recorder stand out from the competition as the best choice for security sur
ページ12に含まれる内容の要旨
1.2 Specifications Video Format NTSC or PAL 16 / 9 BNC camera inputs (1 Vp-p/75ohm) Video Input 1 BNC video out (1 Vp-p/75ohm) a nd S-Video out for Main Video Output Monitor 1 BNC video out (1 Vp-p/75ohm) f or Call Monitor 16 / 9 BNC video out (1 Vp-p/75ohm) f or Looping Video Compression MPEG4 720x480 (N TSC:120IPS) / 720x576 (P AL:100IPS) EDR1640 Recording Resolution 720x240 (N TSC:240IPS) / 720x288 (P AL:200IPS) 360x240 (N TSC:480IPS) / 360x288 (P AL:400IPS) EDR1620 Recording 7
ページ13に含まれる内容の要旨
RS-232 9-pin female connector for testing purposes RS-485 For Keyboard and PTZ connection Audio 4 mono inputs, 1 mono (S PEAKER) o utputs AC100~240 Power Source Power Consumption 60W Dimension 430 (W ) x 88 (H ) x 300 (D ) mm / 17” (W ) x 3.5” (H ) x 12” (D ) Weight 6.24 kg (approx. 13.7 lbs) o o Operating Temperature 0 C ~ +40 C / 3 ~104 NTSC PAL Recording Rate D1 720x480 : 120 IPS D1 720x576 : 100 IPS 1640 model Half D1 720x240 : 240 IPS Half D1 720x288
ページ14に含まれる内容の要旨
1.3 Front Panel Keypads 9 11 13 21 19 20 17 14 15 8 10 12 18 1 3 23 5 7 22 2 4 6 16 Keys: 1. REC: Press this key to start instant recording. 2. STOP: Press this key to stop recording and playing back. 3. PLAY: Press this key to start playing back. 4. PAUSE: Press this key to pause the playback picture. 5. SEARCH: Press this key to enter the SEARCH MENU. 6. COPY: Press this key to enter the Copy Menu. 7. ENTER: Press this key to enter items or jump to next subentry in the menu setting. 8. DISPLAY
ページ15に含まれる内容の要旨
9. SELECT: On live view, press this key to assign a camera to a multi-screen or to adjust single screen display properties. In menus, press this key to select certain features. 10. MODE: Switch PIP, 4, 7, 9, 10, 13 and 16 displays in Live and Playback modes. 11. ZOOM: In full screen mode, 2x electronic zoom. Zoom screen can be moved through JOG. ENTER key changes the scroll direction between horizontal and vertical. Pressing the zoom key again switches the electronic zoom off. In multiscreen mod
ページ16に含まれる内容の要旨
15 . Shuttle and Jog Dial Shuttle: In the Playback mode, turn the Shuttle dial to fast forward/rewind the video. In the Pause mode, turn the Shuttle dial to slow forward/rewind the video. In the event list, turn the Shuttle to change pages. Jog Dial: In the Pause mode, turn the Jog dial to forward/rewind the video frame by frame. In the Menu mode, turn the Jog dial to change settings and values in subentries. 16 . System LEDs LEDs for system active HDD, ALARM and LAN display. 17 . Channel Key (1
ページ17に含まれる内容の要旨
1.4 Back Panel Connections Main Power plug: power source to AC 100~ 240V. Audio IN: Audio inputs 1~4 for recording, and it can be set to “YES” or “NO” in the RECORD SETUP MENU. Audio OUT: Connect an audio output to a monitor or other device. MAIN MONITOR: This connector is used for the main monitor display, a number of different display modes may be selected for viewing. CALL MONITOR: This connector is used for the call monitor. This monitor
ページ18に含まれる内容の要旨
For EDR920 Series: VIDEO OUT(1 ~9): Top row BNC connectors for video looping out 1~9. VIDEO IN(1 ~9): Bottom row BNC connectors for video input 1~9 . Alarm Input ALM-INPUT: Normal open or normal close type alarm signal inputs. The Alarm Input can be selected as normal open (N .O.) o r normal close ( N .C.) i nput in the ALARM SETUP MENU. When an alarm occurs, alarm recording will automatically start. ALM-OUTPUT: A built-in relay offers 3 nodes which are ALM-COM (
ページ19に含まれる内容の要旨
Matrix outputs 1~4: BNC connectors for Matrix monitor outputs 1~4. SCSI Connector: For connecting the optional EDA800 storage expansion. Mouse: PS/2 connector for mouse input. S-Video: PS/2 connector for S-Video monitor output. Cascade is designed for connecting a number of DVRs to one monitor. You will be allowed to view and to control as many DVRs as you prefer from the same monitor simply switching the screen using a multi-function keyboard control
ページ20に含まれる内容の要旨
1.5 Monitor Display The status information of the cameras or machine will show up, and be located at different places on the screen. 1. Channel tag 2. Event sign 3. Select sign 4. Play status bar 5. Record status bar 1. Channel tag: A channel tag indicates the channel name of the screen. 2. Event sign: Event signals which are small icons with a capital letter and red background show the events on each screen. There are a total of 6 different signals: Alarm event. In order to show the camera vide
