K&N Engineering 69-2520の取扱説明書

ページ1に含まれる内容の要旨

WARNING: Please follow directions carefully. The K&N
Drycharger, included, must be installed on the K&N air filter
in all K&N Typhoon Cold-Air intake kits. The K&N Typhoon
Intake System is a performance product that can be used
safely during normal, ambient weather conditions. During
harsh and inclement weather conditions, you must convert
your Complete Cold Air Intake System to a Short-Ram con-
figuration, or return your intake to the stock OEM airbox
and intake tract configuration. Failure

ページ2に含まれる内容の要旨

INSTALLATION INSTRUCTIONS Continued 15. Remove the battery tray mounting bolt. 22. Install the smaller grommet into the K&N intake 29. Install the K&N Drycharger and hose clamp This bolt will be re-used. tube. onto the K&N Filtercharger. 23. Slide the K&N intake tube down the resonator 30. From underneath the vehicle, install the K&N 16. Using the four bolts that were removed in hole then insert the other end into the throttle body Filtercharger onto the K&N intake tube. step 7, secure the two p