ページ1に含まれる内容の要旨
INSTRUCTIONS
' ' "' PRESET
REW FF
SLOW FAST DIR PLAY/PAUSE REC
SPOT FUNCTION AUTO FREEZE PTZ COPY SEARCH LIVE/PB ; ;
MENU
STANDBY
1 2 3
HDD
4 5 6 ESC
ALARM
RX/TX
! D-ZOOM
RESET
STATUS
REC
78 9
PLAY
HOME
MULTI
+10 0
PIP
CAMERA /NUMBER INPUT
DVR-4N
DVR-8N
DVR-16N
4/8/16 Camera DVR
6
ページ2に含まれる内容の要旨
WARNING This symbol is intended to alert the user to the presence of unprotected “Dangerous voltage" within the product's enclosure that may be strong enough to cause a risk of electric shock. This symbol is intended to alert the user to the presence of important operating and mainten nce (servicing) instructions i t e literature accompanying the applia ce. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
ページ3に含まれる内容の要旨
PRECAUTION All the safety and operating instructions must be read before the unit is operated. • Make sure to switch the power off before you install the DVR. • There is the danger of an electric shock if the DVR is opened by an unqualified service engineer or installer. • Avoid using the DVR outside of the reference temperature and humidity indicated in the specification. • Avoid exposing the DVR to violent movement or vibration. • Do not use or store the DVR in
ページ4に含まれる内容の要旨
CONTENTS CONTENTS CHAPTER 1 FEATURES..............................................................................4 CHAPTER 2 PACKING DETAIL....................................................................6 CHAPTER 3 LOCATION AND CONTROL .....................................................7 3.1 FRONT PANEL CONTROLS............................................7 3.2 REAR PANEL CONNECTORS.........................................8 CHAPTER 4 INSTALLATION.....................
ページ5に含まれる内容の要旨
FEATURES Chapter 1 Features Operation Playback, recording, backup and transmission simultaneously Real time single or multi-screen display Pan & Tilt, 2X/4X digital zoom and PIP display Easy operation by Jog shuttle, IR remote controller, external keypad controller and USB 2.0 Mouse Hidden camera option (covert) User-friendly setup menu and operation Playback Multi-screen playback (Full, Quad,4/ 9/16 split) Search by date, time and camera Preview window on event searc
ページ6に含まれる内容の要旨
FEATURES Audio 4 channels audio recording in real time Copy USB 2.0 external HDD USB 2.0 memory stick CD-RW/ DVD-RW (option) General Software downloading facility via network and USB memory stick Auto detection of PAL / NTSC Built-in hardware Watchdog Automatic time adjustment through Network VGA output for PC monitor(Option) Optional Removable HDD,CD-RW or DVD-RW Loop-through connections Graphic User Interface for the MENU screen 5
ページ7に含まれる内容の要旨
PACKING DETAIL Chapter 2 Packing Detail PRESET REW FF SLOW FAST DIR PLAY/PAUSE REC SPOT FUNCTION AUTO FREEZE PTZ COPY SEARCH LIVE/PB MENU STANDBY 3 1 2 HDD 4 5 6 ESC ALARM RX/TX D-ZOOM RESET STATUS REC 78 9 PLAY +10 MULTI HOME 0 PIP CAMERA / NUMBER INPUT 1. DVR 2. Network Viewer Program CD 4. Remote controller 3. User’s Manual 5. R-HDD Rack Key (option) 6. Power Cord 7. Battery CONTENTS 1. DVR 2. Network Vi
ページ8に含まれる内容の要旨
LOCATION AND CONTROL Chapter 3 Location and Control 3.1 FRONT PANEL CONTROLS 1 SPOT / ESC Button to control spot monitor/ return to the previous menu 2 FUNCTION Using this button when you select “USER” in Relay 4 3 AUTO / F / ( - ) Button to begin the auto sequence mode/ decrease the value/ focus in PTZ mode Display of the status of power(STANDBY), HDD(HDD) , network(RX / TX),REC,P 4 LED Display LAY(PLAYBACK) 5 PTZ Button to control PTZ camera 6 SEARCH(PRESET) Button to dis
ページ9に含まれる内容の要旨
LOCATION AND CONTROL 3.2 REAR PANEL CONNECTORS Port Name Description BNC input ports for cameras 1 CAMERA IN RCA input ports for an audio signal(4CH Line input) 2 AUDIO IN RCA output port for an audio signal 3 AUDIO OUT Switch to use the terminal block connectors of RS-422 or RS-485 4 TERM ON / OFF Input and output terminal blocks for time synchronization among DVR 5 T-ADJ Terminal blocs of RS-422 or RS-485 6 RS-422 / 485 Switch to convert into RS-422 or RS-485 7 422
ページ10に含まれる内容の要旨
INSTALLATION Chapter 4 Installation 4.1 TOTAL CONNECTION LAY-OUT 9
ページ11に含まれる内容の要旨
INSTALLATION 4.2 INDIVIDUAL CONNECTION 4.2.1 Camera * Connect a female BNC connector of each camera to a male BNC connector, “CAMERA IN” port. * Connect the looping BNC output to other inputs as required. 10
ページ12に含まれる内容の要旨
INSTALLATION 4.2.2 Audio (*Refer to the specification) Audio Input - AUDIO IN : Connect the RCA Line Jack of the relevant equipment (for example, a camera with a built-in microphone) to the AUDIO IN port. Audio Output - AUDIO OUT : Connect the RCA Line output to a monitor with a built-in speaker. NOTE This DVR can be connected only with a line audio and not support a microphone for audio input and output. To record audio should be enable in the AUDIO se
ページ13に含まれる内容の要旨
INSTALLATION 4.2.3 Monitor - Connect the female BNC for monitor output. - Connect the male Y/C cable socket for S-VIDEO monitor output. 4.2.4 Power CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AC110~240V 50/ 60Hz - Auto-detect the correct voltage of power (110~240 VAC) - Connect the power cord. 12
ページ14に含まれる内容の要旨
INSTALLATION 4.2.5 USB 2.0 ports 1 Three USB ports are provided to connect a USB memory stick, external storage devices and CD-RW/DVD-RW for video clip copying. One USB port is on the front panel and the other two are on the rear panel. 2 A USB mouse can be connected to one of the ports. You can use the mouse to navigate through the screens and menus much like you would on a computer. Installation Process C
ページ15に含まれる内容の要旨
OPERATION Chapter 5 Operation 5.1 FACTORY DEFAULT MENU Setup> QUICK SETUP> QUICK SETUP…………………………..………OFF IMAGE SIZE………………………………………720x240 RECORD FRAME…………………………………60 EVENT……………………….…..…………...........ALL PRE RECORD TIME……….……………………..5 sec POST RECORD TIME………………………..…..10 sec IMAGE QUALITY.. ………………………………FINE AUDIO RECORD ………………………………….OFF REMOTE CONTROL ID.…………….………..… ..ALL SCREEN> POSITION HORIZONTAL POSITION………………….0 VERTICAL POSITION.……………………..0
ページ16に含まれる内容の要旨
OPERATION ADD SPOT MULTI……………………………....OFF RECORD> RECORD SETUP RECORD PROGRAM..………………….……......6 RECORD PROGRAM (Refer to page 52) IMAGE QUALITY RECORD QUALITY……………………….…….....FINE AUDIO RECORD AUDIO 1………………..…………………….…...... OFF AUDIO 2………………..…………………….…...... OFF AUDIO 3………………..…………………….…...... OFF AUDIO 4……………..……………………….…...... OFF REPEAT RECORD REPEAT RECORD..………………………………..ON REPEAT RECORD ALARM.………………….
ページ17に含まれる内容の要旨
OPERATION REC/PLAY CHECK…..………………….……………....…OFF VIDEO STANDARD…………….…………………………..AUTO LANGUAGE……………….………..………………….…….ENGLISH REMOTE CONTROL ID.…………….………..…………….ALL KEY ECHO…..………………….……………………………ON DVR INITIALIZE.………………….………..………………..NO FIRMWARE UPGRADE………………….…………………NO LINK> NETWORK DHCP……..……………………………………………OFF RS-232 BAUD RATE..………………….……………………..115200 DATA BIT……..……………………………………….8 PARITY BIT….……
ページ18に含まれる内容の要旨
OPERATION 5.2 FRONT PANEL CONTROLS 5.2.1 POWER ON/ OFF SWITCH(located in rear panel) After the connection of power cord and other devices(HDDS) with this DVR, turn the power on. a. The video signal system (NTSC or PAL) is automatically detected. b. Power Failure Recovery This DVR automatically reverts back to programmed record parameters upon power restoration. c. If the power key is protected by password, the power on/off cannot be executed before input the correc
ページ19に含まれる内容の要旨
OPERATION Use the +10 Button when you select two digit camera numbers. EX) Camera Number 12 = Press the +10 Button, and then press the No. 2 Button. CAMERA/NUMBER INPUT buttons are used to input the password in the password lock function. 5.2.2.2 Auto Sequence Display example for 16CH - Press the AUTO button, each screen display will be automatically switching according to the AUTO SE
ページ20に含まれる内容の要旨
OPERATION 5.2.3 RECORD Press the REC button and the following message will be displayed as below; MANUAL MODE Press the REC button to begin recording. To stop recording, press the REC button again. The screen will be turned into real time display mode. SCHEDULE MODE When Schedule mode is selected, the recording will be automatically executed according to the recording schedule. (Please refer to the RECORD PROGRAM in the RECORD setup, page 47.)
