ページ1に含まれる内容の要旨
4 CHANNEL DVR
User Manual
SRD-440
ページ2に含まれる内容の要旨
4 Channel DVR User Manual Copyright ©2011 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document shall be reproduced, distributed or change
ページ3に含まれる内容の要旨
OVERVIEW overview IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer’s instr
ページ4に含まれる内容の要旨
overview BEFORE START This user manual provides Information for using the DVR such as brief introduction, part names, functions, connection to other equipment, menu setup, etc. You have to keep in mind the following notices : • SAMSUNG retains the copyright on this manual. • This manual cannot be copied without SAMSUNG’s prior written approval. • We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of instructions mentioned in this ma
ページ5に含まれる内容の要旨
OVERVIEW CONTENTS 3 Important Safety Instructions OVERVIEW 4 Before Start 7 Features 9 Part Names and Functions (Front) 3 10 Part Names and Functions (Rear) 11 Remote Control 12 Installation CONNECTING WITH 12 Checking the installation environment OTHER DEVICE 13 Connecting the Video, Audio, and Monitor 13 Connecting the USB 13 Connecting POS Device 12 14 Connecting the Alarm Input/Output 14 Connecting the RS-485 Device 15 Connecting the Network 17 Getting Started LIVE 19 Live Screen Configur
ページ6に含まれる内容の要旨
overview 62 Search SEARCH & PLAY 65 Playback 62 67 Introducing Web Viewer WEB VIEWER 68 Connecting Web Viewer 69 Using Live Viewer 75 Using Search Viewer 67 79 Viewer Setup 90 About 91 Mobile Viewer 92 SEC Backup Viewer BACKUP VIEWER 92 94 Product Specification APPENDIX 96 Product Overview 97 Default Setting 100 Troubleshooting 94 103 Open Source License Report on the Product 6_ overview
ページ7に含まれる内容の要旨
OVERVIEW FEATURES The DVR employs H.264 video encoding for 4 channel inputs and audio encoding for 1 channel while simultaneously supports hard disc recording and playback. These DVRs also supports network connectivity, providing remote monitoring from a remote PC transferring video and audio data. • Provides a convenient User Interface • Supports CIF(S)/2CIF(M)/4CIF(L) recording formats • With the network specific codec, network transfer enabled regardless of the recording conditions • De-i
ページ8に含まれる内容の要旨
overview Standards Approvals This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 M of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to r
ページ9に含まれる内容の要旨
OVERVIEW PART NAMES AND FUNCTIONS (FRONT) DIGITAL VIDEO RECORDER SRD-440 POWER REC b c Part Names Functions USB Port Connects the USB devices. Remote Control Input the remote control signal. b Receiver Power LED : Displays the power ON/OFF status. LED Indicator c REC : Lights on when recording is in progress. English _9
ページ10に含まれる内容の要旨
overview PART NAMES AND FUNCTIONS (REAR) b c AUDIO IN NETWORK 12 ALARM OUT DC 12 V 1 COM VGA ALARM IN RS-485 12 3 4 GG + CONSOLE 34 USB VIDEO IN VIDEO OUT (SPOT) AUDIO OUT SERIAL Part Names Functions VIDEO IN Input port for the composite video signal. VIDEO OUT (SPOT) BNC type of output port for the composite video signal. b AUDIO IN Input ports (RCA jack) for the audio signal. c VGA Output port for VGA video signal. NETWORK NETWORK connector port. DC 12V DVR power input por
ページ11に含まれる内容の要旨
OVERVIEW REMOTE CONTROL SEARCH BACKUP Displays the search menu. Displays the Backup Menu. MODE Changes the screen mode. DVR Activates the DVR function. POWER Displays the Exit pop up screen. NUMBER [0~+10] Used as the numeric input keys, or displays a single channel. ID Sets the ID of the system. Select 2 digits from 0 ~ 9 while pressing the ID Key. Skip Backward (by unit time), Slow Rewind, Slow Forward, Move Frame Skip Forward (by unit time) While paused, moves to the previous/next frame.
ページ12に含まれる内容の要旨
connecting with other device INSTALLATION Please take note of the followings before using this product. • Do not use the product outdoor. • Do not spill water or liquid in the connection part of the product. • Do not impose the system to excessive shock or force. • Do not pull out the power plug forcefully. • Do not disassemble the product on your own. • Do not exceed the rated input/output range. • Use a certified power cord only. • For the product with an input ground, use a grounded power pl
ページ13に含まれる内容の要旨
CONNECTING WITH OTHER DEVICE CONNECTING THE VIDEO, AUDIO, AND MONITOR AUDIO IN NETWORK 12 ALARM OUT DC 12 V 1 COM VGA ALARM IN RS-485 12 3 4 GG + CONSOLE 34 USB VIDEO IN VIDEO OUT (SPOT) AUDIO OUT SERIAL Only one mouse port is available. M CONNECTING THE USB 1. By factory default, a USB port is provided for external connection. 2. You can connect a USB HDD, USB memory or mouse to the USB port. 3. If a USB HDD is connected to the system, recognition and settings are available in “Menu > Sett
ページ14に含まれる内容の要旨
connecting with other device CONNECTING THE ALARM INPUT/OUTPUT Connecting the alarm input signal IN NETWORK ALARM OUT DC 12 V 1 COM VGA ALARM IN RS-485 12 3 4 GG + Connection port for the alarm input signal. CONSOLE CONSOLE USB USB Connect one strand of the sensor signal line to one of 4 OUT SERIAL SERIAL strands of the alarm input port, and connect the other strand to the [G] port. ALARM OUT Connecting the alarm output signal 1 COM ALARM IN RS-485 12 3 4 GG + Connection port for the alarm out
ページ15に含まれる内容の要旨
CONNECTING WITH OTHER DEVICE CONNECTING THE NETWORK Connecting to Network through Ethernet (10/100BaseT) AUDIO IN NETWORK 12 ALARM OUT DC 12 V 1 COM VGA ALARM IN RS-485 12 3 4 GG + CONSOLE 34 USB VIDEO IN VIDEO OUT (SPOT) AUDIO OUT SERIAL RJ-45 Ethernet Cable (Direct Cable) NETWORK Back Bone Hub/Switcher Windows Network Viewer Hub/Switcher Connecting to the Network using the router AUDIO IN NETWORK 12 ALARM OUT DC 12 V 1 COM VGA ALARM IN RS-485 12 3 4 GG + CONSOLE 34 USB VIDEO IN VIDEO OUT (SP
ページ16に含まれる内容の要旨
connecting with other device Connecting to Network through ADSL AUDIO IN NETWORK 12 ALARM OUT DC 12 V 1 COM VGA ALARM IN RS-485 12 3 4 GG + CONSOLE 34 USB VIDEO IN VIDEO OUT (SPOT) AUDIO OUT SERIAL RJ-45 Ethernet Cable (Direct Cable) NETWORK Phone(ADSL) Line ADSL MODEM Windows Network Viewer Hub/Switcher 16_ connecting with other device
ページ17に含まれる内容の要旨
LIVE live GETTING STARTED Starting the system 1. Connect the power cable of the DVR to the wall outlet. It takes about 10 seconds to display the start screen after M booting. 2. You will see the initialization screen. The initialization process will last about 1 minute. REC If a new HDD is installed, the initialization process may take longer. 3. The live screen appears with a beep. 2011-01-01 01:10:25 2011-01-01 01:10:25 Shutting Down the System You can shut down the system only if you h
ページ18に含まれる内容の要旨
live Login To access a DVR or restricted menu, you should have logged in to the DVR. 1. In live mode, right-click any area of the screen. Scene Mode 2011-01-01 01:10:25 Spot Out You will see the context sensitive menu as in the right Audio Off Freeze figure. Stop Alarm Record Play Search Backup Main Menu Shutdown Hide Launcher Login 2. Click . 2011-01-01 01:10:25 The login dialog appears. You can also see the login dialog to access a desired menu by pressing the [MENU] button on the
ページ19に含まれる内容の要旨
LIVE LIVE SCREEN CONFIGURATION Icons on the Live Screen You can check the status or operation of the DVR with the icons on the live screen. 2011-01-01 00:00:01 CAM 01 CAM 01 Name Description Current Date, Time Displays the current time and date. Login Information When you are logged in, the “LOG ON” icon will be displayed. b Displayed if the zoom function is activated. Displayed if you press the Pause button. Displayed in Auto Sequence mode where all channels are switched at the Screen Mod
ページ20に含まれる内容の要旨
live Error Information • If the internal HDD is not connected, the “NO HDD”( ) message will appear; if there occurs a problem, you will see the “HDD FAIL”( ) message in the top left corner. In this case, make sure you contact the service center for assistance as this may cause a failure of recording, playback or backup. If you see the No HDD, HDD FAIL icons on the screen, contact the service center for more details. M Live Screen Menu In addition to the buttons the remote control, you can a
