ページ1に含まれる内容の要旨
SRD-830/830D/1610/1610D/1630/1630D
SRD-850/850D/1650/1650D
SRD-870/870D/1670/1670D
8 Channel/16 Channel DVR
User Manual
imagine the possibilities
Thanks you for purchasing this Samsung product.
To receive a more complete service, please visit
our website
www.samsungsecurity.com
ページ2に含まれる内容の要旨
overview Features The SRD DVR (Digital Video Recorder) employs H.264 video encoding for 8 or 16 channel inputs and G.723 audio encoding for 4 or 16 channels while simultaneously supports hard disc recording and playback. These DVRs also supports network connectivity, providing remote monitoring from a remote PC transferring video and audio data. ~ Provides convenient User Interface ~ 8/16 CH Composite Input Connectors ~ Supports CIF(S)/2CIF(M)/4CIF(L) recording formats ~ With the network spec
ページ3に含まれる内容の要旨
overview important saFety instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. ! 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer’s instructio
ページ4に含まれる内容の要旨
overview BeFore start This user manual provides Information for using the DVR such as brief introduction, part names, functions, connection to other equipment, menu setup, etc. You have to keep in mind the following notices : ~ SAMSUNG retains the copyright on this manual. ~ This manual cannot be copied without SAMSUNG’s prior written approval. ~ We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of instructions mentioned in this m
ページ5に含まれる内容の要旨
overview standards approvals ` This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 M of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to
ページ6に含まれる内容の要旨
overview contents 2 Features overview 3 Important Safety Instructions 4 Before Start 8 Part Names and Functions (Front) 2 10 Part Names and Functions (Rear) 13 Remote Control 15 Checking the installation environment instaLLation 16 Rack Installation 16 HDD Addition 15 20 Connecting the Video, Audio, and Monitor connecting with other device 20 Connecting the USB 21 Connecting External SATA HDD 21 Connecting POS Device 20 21 Connecting the Alarm Input/Output 22 Connecting the RS-485 Device 23 C
ページ7に含まれる内容の要旨
overview 70 Search search & pLay 73 Playback 70 74 Introducing Web Viewer weB viewer 75 Connecting Web Viewer 77 Using Live Viewer ! 83 Using Search Viewer 74 87 Viewer Setup 97 About 98 SEC Backup Viewer BacKup viewer 98 100 Product Specification (SRD-830/830D/1610/ appendix 1610D/1630/1630D) 103 Product Specification (SRD-850/850D/870/ 870D/1650/1650D/1670/1670D) 100 106 Product Overview 107 Default Setting 110 Troubleshooting English _
ページ8に含まれる内容の要旨
overview part names and Functions (Front) 830/850/870 1 ALARM HDD NETWORK BACKUP REC REC 1 2 3 4 5 6 7 8 ZOOM FREEZE BACKUP SEARCH 9 0 SHR-6080/7080/8080 TELE WIDE VIEW PRESET MODE AUDIO ALRAM MENU USB RETURN 10 1610/1630/1650/1670 1 ALARM HDD NETWORK BACKUP REC REC 1 2 3 4 5 6 7 8 ZOOM FREEZE BACKUP SEARCH 9 10 11 12 TELE WIDE VIEW PRESET SHR-6160/6163/7160/8160 MODE AUDIO ALRAM MENU 13 14 15 16 USB RETURN 10 830d/850d/870d 1 ALARM HDD NETWORK BACKUP REC
ページ9に含まれる内容の要旨
overview Part Names Functions ALARM : Lights on when an event occurs. HDD : Displays the normal access to HDD. Upon access to HDD, LED repeats on and off. LED Indicator NETWORK : Displays both network connection and data transfer status. BACKUP : Displays when Backup is in progress. REC : Lights on when recording is in progress. ! PTZ : Sets PTZ Mode ON/OFF. ZOOM(TELE) : Sets the screen to the x2 digital zoom. Runs the TELE function in the PTZ Mode. FREEZE(WIDE) : R uns the FREEZE functio
ページ10に含まれる内容の要旨
overview part names and Functions (rear) 830/830d 1 9 10 11 1 1 1 1610/1610d/1630/1630d 1 9 10 11 1 1 1 850/850d 1 9 10 11 1 1 1 1650/1650d 1 9 10 11 1 1 1 10_ overview
ページ11に含まれる内容の要旨
overview 870/870d ! 1 9 10 11 1 1 1 1670/1670d 1 9 10 11 1 1 1 English _11
ページ12に含まれる内容の要旨
overview Part Names Functions Audio input signal port (RCA jack) and port for optional audio extension cable. AUDIO IN SRD-1650/1650D/1670/1670D (Audio 5~16CH) SRD-850/850D/870/870D (Audio 5~8CH) AUDIO OUT Audio Signal Output Port (RCA jack). VIDEO IN Composite Video Signal Input Port (BNC type connector). LOOP OUT Used to transfer a video signal to other video devices. VIDEO OUT Composite Video Signal Output Port (BNC type connector). VGA VGA Video Signal Output Port. HDMI HDMI connector port.
ページ13に含まれる内容の要旨
overview remote controL dvr Available after switching to DVR mode by pressing the [dvr ] button on the remote control. BacKup search Displays the search menu. Displays the Backup Menu. open/cLose ! Opens or closes the CD tray. mode Changes the screen mode. dvr Activates the DVR function. power Displays the Exit pop up screen. + numBer [0~ 10] Used as the numeric input keys, or displays a single channel. id Sets the ID of the system. Select 2 digits from 0 ~ 9 while pressing the ID Key. skip Ba
ページ14に含まれる内容の要旨
overview monitor Available after switching to Monitor mode by pressing the [monitor ] button on the remote control. auto id reset Selects the screen status automatically. Initializes the ID value to 00. p.mode Selects the screen mode. power monitor Turns the monitor power on/off. Activates the monitor function. numBer [0~9] Changes the system ID. id Sets the ID. Select 2 digits from 0 ~ 9 while pressing the ID Key. +/– mute Adjusts the audio volume. Mutes the audio out. menu Displays the Setup M
ページ15に含まれる内容の要旨
instaLLation installation Please take note of the followings before using this product. ~ Do not use the product outdoor. ~ Do not spill water or liquid in the connection part of the product. ~ Do not impose the system to excessive shock or force. ~ Do not pull out the power plug forcefully. ! ~ Do not disassemble the product on your own. ~ Do not exceed the rated input/output range. ~ Use a certified power cord only. ~ For the product with an input ground, use a grounded power plug. checKing
ページ16に含まれる内容の要旨
installation racK instaLLation Install the Bracket-Rack as shown in the figure, and then fasten the screws on both sides (2 screws on each side). ` Fix the screws not to be loosened by vibrations. hdd addition You can install additional HDDs. Make sure to unplug the power cord from the wall outlet to prevent possible electric shock, injury or product damage. Please consult your provider for further information on HDD installation since improper installation or settings may damage the produc
ページ17に含まれる内容の要旨
instaLLation if adding hdds to srd-830/850/870/1610/1630/1650/1670 1. First, loosen the screws on both sides and remove the cover. Cover ! . Disconnect the power and HDD Signal cable from the existing HDDs, then loosen the screws (x4) in the left/right and upper sides and remove the upper Upper Bracket brackets. Lower Bracket . Install HDDs (x2) on the lower bracket and fix them with screws. ` Firmly secure the screw so that it does not become loose Upper Bracket from vibration. . Inst
ページ18に含まれる内容の要旨
installation . When the installation of additional HDDs is done, connect the power cable and connect the HDD signal cables (SATA Cable) to connectors ~ on the main board. ` You can check the HDD map directly on the DVR. Refer to “Storage Device > HDD Map”. (Page 48) ` Note that the order the HDD data cable is connected will not affect the operation. The only consideration is the length of each cable. ` SRD-830/1610/1630 do not support DVD media. if adding hdds to srd-830d/850d/870d/1
ページ19に含まれる内容の要旨
instaLLation . Install a HDD (x1) on the lower bracket and fix it with screws. Upper Bracket Firmly secure the screw so that it does not become loose from vibration. . Install HDDs (x3) on the upper bracket and fix them with screws. Lower Bracket ! . When the installation of additional HDDs is done, insert the lower and upper brackets into the DVR and fix them with the provided screws. . When the installation of additional HDDs is done, connect the power cable and connect the HDD
ページ20に含まれる内容の要旨
connecting with other device ` The following figures are based on Model SRD-1670D. M connecting the video, audio, and monitor SPOT AC 100-240V~IN VIDEO IN VIDEO IN AUDIO OUT AUDIO IN VIDEO OUT VIDEO OUT HDMI (composite) (VGA) connecting the usB 1. There are two USB ports at the front and one at the back of the product. . You can connect a USB HDD, USB CD/DVD player, USB memory or mouse to the USB port. . If a USB HDD is connected to the system, recognition and settings are available in “menu >
