ページ1に含まれる内容の要旨
4 CHANNEL DVR
User Manual
SDE-3001/3003
ページ2に含まれる内容の要旨
4 Channel DVR User Manual Copyright ©2011 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document shall be reproduced, distributed or change
ページ3に含まれる内容の要旨
OVERVIEW overview IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer’s instr
ページ4に含まれる内容の要旨
overview CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER CAUTION SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. This exclamation point symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying th
ページ5に含まれる内容の要旨
OVERVIEW BEFORE START This user manual provides Information for using the DVR such as brief introduction, part names, functions, connection to other equipment, menu setup, etc. You have to keep in mind the following notices : • SAMSUNG retains the copyright on this manual. • This manual cannot be copied without SAMSUNG’s prior written approval. • We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of instructions mentioned in this
ページ6に含まれる内容の要旨
overview CONTENTS 3 Important Safety Instructions OVERVIEW 5 Before Start 8 Features 10 Part Names and Functions (Front) 3 11 Part Names and Functions (Rear) 12 Remote Control 13 Installation CONNECTING WITH 13 Checking the installation environment OTHER DEVICE 14 Connecting the Video, Audio, and Monitor 14 Connecting the USB 15 Connecting the Camera 13 18 Connecting the Alarm Input/Output 19 Connecting the Network 21 Getting Started LIVE 23 Live Screen Configuration 27 Live Mode 29 Spot Out 21
ページ7に含まれる内容の要旨
OVERVIEW 62 Search SEARCH & PLAY 65 Playback 62 67 Introducing Web Viewer WEB VIEWER 68 Connecting Web Viewer 69 Using Live Viewer 73 Using Search Viewer 67 77 Viewer Setup 87 About 87 Mobile Viewer 88 SEC Backup Viewer BACKUP VIEWER 88 90 Product Specification (Camera) APPENDIX 92 Product Specification 94 Default Setting 97 Troubleshooting 90 99 Open Source License Report on the Product English _7
ページ8に含まれる内容の要旨
overview FEATURES The DVR employs H.264 video encoding for 4 channel inputs and audio encoding for 4 channels while simultaneously supports hard disc recording and playback. These DVRs also supports network connectivity, providing remote monitoring from a remote PC transferring video and audio data. • Provides a convenient User Interface • 4 CH Composite Input Connectors • Supports CIF(S)/2CIF(M)/4CIF(L) recording formats • With the network specific codec, network transfer enabled regardless o
ページ9に含まれる内容の要旨
OVERVIEW Standards Approvals This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 M of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to
ページ10に含まれる内容の要旨
overview PART NAMES AND FUNCTIONS (FRONT) DIGITAL VIDEO RECORDER POWER REC b c Part Names Functions USB Port Connects the USB devices. Remote Control Input the remote control signal. b Receiver Power LED : Displays the power ON/OFF status. LED Indicator c REC : Lights on when recording is in progress. 10_ overview
ページ11に含まれる内容の要旨
OVERVIEW PART NAMES AND FUNCTIONS (REAR) b c 12 AUDIO IN NETWORK DC 12V ALARM IN ALARM OUT 1 2 3 4 G 1 COM G CONSOLE USB VIDEO OUT AUDIO OUT VGA 34 Part Names Functions CAMERA IN Video Signal input ports (UTP type connector). VIDEO OUT Video Signal Output Port (RCA jack). b Audio input signal port (RCA jack, CH1). AUDIO IN For SEB-1006R (MIC integrated camera), it is also recommended not to connect other c input devices to the AUDIO IN port. NETWORK NETWORK connector port.
ページ12に含まれる内容の要旨
overview REMOTE CONTROL SEARCH BACKUP Displays the search menu. Displays the Backup Menu. MODE Changes the screen mode. DVR Activates the DVR function. POWER Displays the Exit pop up screen. NUMBER [0~+10] Used as the numeric input keys, or displays a single channel. ID Sets the ID of the system. Select 2 digits from 0 ~ 9 while pressing the ID Key. Skip Backward (by unit time), Slow Rewind, Slow Forward, Move Frame Skip Forward (by unit time) While paused, moves to the previous/next frame. F
ページ13に含まれる内容の要旨
CONNECTING WITH OTHER DEVICE connecting with other device INSTALLATION Please take note of the followings before using this product. • Do not use the product outdoor. • Do not spill water or liquid in the connection part of the product. • Do not impose the system to excessive shock or force. • Do not pull out the power plug forcefully. • Do not disassemble the product on your own. • Do not exceed the rated input/output range. • Use a certified power cord only. • For the product with an input
ページ14に含まれる内容の要旨
connecting with other device CONNECTING THE VIDEO, AUDIO, AND MONITOR 12 AUDIO IN NETWORK DC 12V ALARM IN ALARM OUT 1 234G 1COMG CONSOLE USB VIDEO OUT AUDIO OUT VGA 34 Only one mouse port is available. M CONNECTING THE USB 1. By factory default, a USB port is provided for external connection. 2. You can connect a USB HDD, USB memory or mouse to the USB port. 3. If a USB HDD is connected to the system, recognition and settings are available in “Menu > Setting the Device > Storage Device”. (Pa
ページ15に含まれる内容の要旨
CONNECTING WITH OTHER DEVICE CONNECTING THE CAMERA Equipped with the IR LED and the illumination sensor, enables you to monitor at night as well as in daytime. The camera is suitable for both internal and external use. SEB-1005R SEB-1007R b c Name Description Groove that is used to fit the camera bracket. Camera Fitting Groove There are two grooves; one on the top and one on the bottom. IR LED These infrared LED's are controlled by the illumination sensor. b Lens Focal length of
ページ16に含まれる内容の要旨
connecting with other device Installing the camera The camera can be installed on the wall, ceiling, shelf or a desired position using the provided bracket. 1. Select a position where you want to install the camera. Make sure the selected position can sustain the weight of the camera. 2. Use the screw bolts (M4 X L15) to mount the camera bracket onto the wall or ceiling. 3. Place the camera on the selected position and fit the hole either on the top or the bottom of the M4 X L15 sized M4 X
ページ17に含まれる内容の要旨
CONNECTING WITH OTHER DEVICE Adjusting the Camera Bracket 1. Choose an installation site that can sufficiently support the weight of the equipments to be installed. 2. Attach the camera bracket to the wall using the supplied screws (M4 X L15). 4x15 sized screws wall or ceiling. 3. Adjust the camera to target the video location and tighten the camera bracket handle on the camera bracket. Install the camera on to the male screw of the camera bracket by rotating the camera clockwise. 4. Loos
ページ18に含まれる内容の要旨
connecting with other device CONNECTING THE ALARM INPUT/OUTPUT Connecting the alarm input signal IN NETWORK DC 12V ALARM IN ALARM OUT Connection port for the alarm input signal. 1 234G 1COMG CONSOLE CONSOLE Connect one strand of the sensor signal line (four strands) to U USB SB UT VGA VGA the alarm input port and connect the other to the [G] port. Connecting the alarm output signal ALARM IN ALARM OUT A ALARM IN LARM IN ALARM ALARM OUT OUT Connection port for the alarm output signal. 1 234G 1COMG
ページ19に含まれる内容の要旨
CONNECTING WITH OTHER DEVICE CONNECTING THE NETWORK Connecting to Network through Ethernet (10/100BaseT) 12 AUDIO IN NETWORK DC 12V ALARM IN ALARM OUT 1 2 3 4 G 1 COM G CONSOLE USB VIDEO OUT AUDIO OUT VGA 34 RJ-45 Ethernet Cable (Direct Cable) NETWORK Back Bone Hub/Switcher Windows Network Viewer Hub/Switcher Connecting to the Network using the router 12 AUDIO IN NETWORK DC 12V ALARM IN ALARM OUT 1 2 3 4 G 1 COM G CONSOLE USB VIDEO OUT AUDIO OUT VGA 34 NETWORK xDSL or Cable xDSL or Cable Mode
ページ20に含まれる内容の要旨
connecting with other device Connecting to Internet through ADSL 12 AUDIO IN NETWORK DC 12V ALARM IN ALARM OUT 1 2 3 4 G 1 COM G CONSOLE USB VIDEO OUT AUDIO OUT VGA 34 RJ-45 Ethernet Cable (Direct Cable) INTERNET Phone(ADSL) Line ADSL MODEM Windows Network Viewer Hub/Switcher 20_ connecting with other device
