ページ1に含まれる内容の要旨
E9017FD_EN.qx3 03.8.6 10:13 AM Page 1
AAA AAA
Digital Video Disc Player
MX5100VR
MX5100VR
Video Cassette Recorder
FM/MW Radio Tuner
R
1
1
ページ2に含まれる内容の要旨
English E9017FD_EN.qx3 03.8.6 10:13 AM Page 2 General Information The region code for this set is 2. Thank you for purchasing this Philips System.This Owner’s Manual explains the basic operation of this System. Since it is usual for DVD movies to be released at different times in different regions of the world, all 2 Environmental Information players have region codes and discs can have an optional region code. If you load a disc of a different All unnecessary packaging has been omitted. reg
ページ3に含まれる内容の要旨
E9017FD_EN.qx3 03.8.6 10:13 AM Page 3 Contents General Information Programming a Recording (TIMER) Environmental Information. . . . . . . . . . . . . . . . . . . . . 2 General information . . . . . . . . . . . . . . . . . . . . . . . . . 13 Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Programming a recording Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 (with the 'SHOWVIEW® system') . . . . . . . . . . . . . . . . 13 Symbols Used i
ページ4に含まれる内容の要旨
English E9017FD_EN.qx3 03.8.6 10:13 AM Page 4 Functional Overview 20. (VCR) Front Panel Appears when a videotape is loaded. 12 3 4 5 21. REPEAT (DVD) Stays on when the repeat function is on. STOP/EJECT 22. B (DVD,VCR) OPEN CLOSE JAZZ CLASSIC Stays on when the inserted disc or cassette is being played POP OPTIMAL back. STANDBY-ON DIRECT SOURCE DVD VCR TUNER DUBBING PLAY STOP TIMER RECORD PLAY HEADPHONE VIDEO AUDIO VOL REC IR SURR 23. k (DVD,VCR) Lights up when the inserted disc comes to a pau
ページ5に含まれる内容の要旨
ANTENNA 75 E9017FD_EN.qx3 03.8.6 10:13 AM Page 5 Functional Overview 1. TIMER SET Rear Panel to put the System into standby mode for a timer recording 1 2 3 2. SYSTEM MENU to access or remove the DVD setup menu (DVD) AV2 (DECODER) FL PROG MW VCR FR DVD/VCR to preset radio stations in Tuner mode (TUNER) C Ω AV1(TV) SL RF OUT AERIAL 3. AUDIO/BAND TV ANTENNA Ω SR FM W (75Ω ) to choose audio languages or sound modes (DVD) DIGITAL AUDIO OUT COAXIAL S-VIDEO SPEAKER (4Ω ) OUT to choose sound mode
ページ6に含まれる内容の要旨
ANTENNA 75 English E9017FD_EN.qx3 03.8.6 10:13 AM Page 6 Functional Overview Setting Up your System 24. {BKL Basic Connections (left/right/up/down) select an item in the menu • Please refer to the instruction books of your TV,VCR, Stereo {B to choose a preset radio station (TUNER) System or other devices as necessary to make the best con- 25. OK nections. acknowledge menu selection (DVD) • Make one of the following connections, depending on the 26. TUNER capabilities of your existing equipme
ページ7に含まれる内容の要旨
ANTENNA 75 ANTENNA 75 ANTENNA 75 ANTENNA 75 ANTENNA 75 E9017FD_EN.qx3 03.8.6 10:13 AM Page 7 Setting Up your System If your TV is not equipped with a SCART input, you can select Antenna Connections the following connection: MW Antenna If your TV has a S-Video input connector, 1 Connect the antenna or cable to the AERIAL of your System. 1 Fix the antenna holder as shown. 2 Connect the S-Video out on the System to the S-Video in on the TV. 3 Connect the COAXIAL (Digital audio out) on the Syste
ページ8に含まれる内容の要旨
English E9017FD_EN.qx3 03.8.6 10:13 AM Page 8 Setting Up your System Setting up Surround Sound Using the Remote Control Connect all the speakers and set up the System properly in • Direct the remote control at the remote sensor of the order to enjoy the Home Cinema experience. System. 1 Place the FRONT Left and Right speakers at equal distances • Do not drop the remote control. from the TV and at a 45-degree angle from the listening posi- • Do not leave the remote control near extremely hot
ページ9に含まれる内容の要旨
E9017FD_EN.qx3 03.8.6 10:13 AM Page 9 Setting Up your System Automatic Channel Setup Follow TV (Automatic TV channels sorting) When the automatic channel search function is activated, the You can programme the tuner to scan only the channels that TV channels are saved in a specific order.This may vary from you can receive in your area. the order of TV channels on the TV. 1 Turn on the TV and select the video out channel on your TV. This function changes the order of TV channels saved in the
ページ10に含まれる内容の要旨
English E9017FD_EN.qx3 03.8.6 10:13 AM Page 10 Setting Up your System Sorting and clearing TV channels manually Changing the video (colour) system (for After you have performed the automatic channel search you VCR features) may not agree with the sequence in which the individual TV If you playback recordings made on other video recorders or channels have been allocated to the programme positions (pro- you want to record from external sources (via the scart sock- gramme numbers) of the System
ページ11に含まれる内容の要旨
E9017FD_EN.qx3 03.8.6 10:13 AM Page 11 VCR Playback Playing cassettes The counter does not move This occurs when there are no recordings on a portion of a tape. • When you select AUTO by pressing the MODE/SYSTEM but- This is not a fault in your System. ton, this System will distinguish the colour system (SECAM, The screen shows '-0:01:20' PAL or ME-SECAM) automatically according to the format of If you rewind a cassette from the tape position '0:00:00', the recorded tape during playback. cou
ページ12に含まれる内容の要旨
English E9017FD_EN.qx3 03.8.6 10:13 AM Page 12 VCR Manual Recording General information Automatic controlled recording from a Use 'Manual Recording' to make a spontaneous recording satellite receiver (RECORD LINK) (for example, a programme currently being shown). This function automatically starts recording on the switched-off If you want to start and stop a recording manually, read the System when a video signal is recognised through the connect- section 'Recording without automatic switch
ページ13に含まれる内容の要旨
E9017FD_EN.qx3 03.8.6 10:13 AM Page 13 VCR Manual Recording Programming a Recording (TIMER) Direct dubbing General information Follow the steps below to copy a DVD or video disc to a Use a TIMER programming to automatically start and stop a recording videotape.This will be possible only if the DVD is not copy at a later time or date.The System will switch to the right programme protected. number and begin recording at the correct time.With this System, you 1 Put a videotape in the cassette c
ページ14に含まれる内容の要旨
English E9017FD_EN.qx3 03.8.6 10:13 AM Page 14 Programming a Recording (TIMER) 5 The decoded data appears after confirmation.You can go back How to check, or delete a programmed to change the data. Select the corresponding input field using recording (TIMER) B or CLEAR. Change the data with numerical key pads. 6 When all inputs are correct, press DISPLAY/STATUS/EXIT.The 1 Press VCR, then DISC/VCR MENU. SELECT KL CHOOSE B programming information is stored in a Timer block. 2 Press K/L to sele
ページ15に含まれる内容の要旨
E9017FD_EN.qx3 03.8.6 10:13 AM Page 15 Other Functions • During playback of the recorded tape in Hi-Fi mode: Switching the status display off or on Display on Mode AUDIO OUTPUT Along with the on screen menu, the status display also displays the TV screen information on the current operating status (counter, playback, L Hi Fi L Audio Stereo STEREO recording,TV channel, etc.) on the TV screen.You can switch R Hi Fi R Audio off the information about the operating status so that the sta- L Hi F
ページ16に含まれる内容の要旨
English POWER ON/OFF E9017FD_EN.qx3 03.8.6 10:13 AM Page 16 Playing a Disc CD VCD DVD-V DVD-V Basic Playback Title Menu 1 Press DVD, then TITLE. Getting Started • The title menu will appear. Turn on the power of the TV, amplifier and any other compo- 2 If the feature is not available, symbol may appear on the nents which are connected to the DVD system. TV screen. Make sure the TV and audio receiver (commercially available) 3 Press Arrow ( L / K / B / s ) to select an item, and OK to are set
ページ17に含まれる内容の要旨
E9017FD_EN.qx3 03.8.6 10:13 AM Page 17 Playing a Disc VCD DVD-V Zoom Repeat The Zoom function allows you to enlarge the video image and • REPEAT are available only during playback. to pan through the enlarged image. 1 Press ZOOM during playback. DVD-V Repeat Title / Chapter • Playback will continue. To activate the repeat function, press REPEAT during playback. 2 Press ZOOM repeatedly to select the required zoom factor: • The repeat mode changes as described below every time you x2, x4 or OF
ページ18に含まれる内容の要旨
English E9017FD_EN.qx3 03.8.6 10:13 AM Page 18 Playing a Disc CD MP3 Program On-Screen Information You may determine the order in which tracks will play. You can check the MP3 files during playback. 1 In stop mode press MODE/SYSTEM. 1 Press DISPLAY/STATUS/EXIT. • The PROGRAM screen will appear. • The name of the file currently in play will be displayed. 2 Press ▲ or ▼ to select a track, 2 Press DISPLAY/STATUS/EXIT again to show the track number, then press OK. the elapsed time, the repeat st
ページ19に含まれる内容の要旨
E9017FD_EN.qx3 03.8.6 10:13 AM Page 19 Playing a Disc DVD-V DVD-V Subtitle Language Parental Control The DVD system allows you to select a language for subtitle Parental Control limits the disc viewing that exceed your set- during DVD disc (if available) playback. tings. (with a password or playback will stop.) 1 Press DVD, then SUBTITLE during playback. This feature allows you to prevent discs with alternative scenes 2 Press SUBTITLE repeatedly to select your desired subtitle lan- from bein
ページ20に含まれる内容の要旨
English E9017FD_EN.qx3 03.8.6 10:13 AM Page 20 DVD Setup Audio Setting Speaker Balance Choose the appropriate Audio settings for your equipment as it You can test the volume balance of each speaker with this pro- only affect during the playback of DVD discs of the DVD sys- cedure. tem. 1 Press DVD to put the DVD system in DVD mode. 1 Press SYSTEM MENU/PROG in STOP mode. • The red DVD light will be on the front of the DVD system. 2 Press B to select CUSTOM, then press OK. Press STOP C to stop
