ページ1に含まれる内容の要旨
V1940MH_EVENT_ENG
DVD Player &
Video Cassette Recorder
OWNER’S MANUAL
MODEL : V194H
Before connecting, operating or adjusting this
product, please read this owner’s manual
carefully and completely.
For service/
support Call:
Toll Free Number
1-800-243-0000
ページ2に含まれる内容の要旨
FCC WARNING: This equipment may generate or use CAUTION radio frequency energy. Changes or modifications to this RISK OF ELECTRIC SHOCK equipment may cause harmful interference unless the DO NOT OPEN modifications are expressly approved in the instruction manual. The user could lose the authority to operate this CAUTION: TO REDUCE THE RISK equipment if an unauthorized change or modification is OF ELECTRIC SHOCK made. DO NOT REMOVE COVER (OR BACK) REGULATORY INFORMATION: FCC Part 15 NO USER-SERVI
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installa- tion, use, and servicing. This product does not contain any
ページ4に含まれる内容の要旨
Contents Introduction . . . . . . . . . . . . . . . . . . . .5-10 Operations - VCR . . . . . . . . . . . . . .21-27 Moisture Condensation . . . . . . . . . . . . . . . . . .5 VCR Tape Playback . . . . . . . . . . . . . . . . .21-22 Basic Instructions . . . . . . . . . . . . . . . . . . . . .21 Symbol Used in this Manual . . . . . . . . . . . . .5 Auto Tracking . . . . . . . . . . . . . . . . . . . . . . . .21 About the Symbol Display . . . . . . . . . . . .5 Manual Tracking . . . . . . . . . .
ページ5に含まれる内容の要旨
AAA Introduction To ensure proper use of this product, please read this Storing Discs owner’s manual carefully and retain for future refer- After playing, store the disc in its case. Do not ence. expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct This manual provides information on the operation sunlight. and maintenance of your DVD+VCR. Should the unit require service, contact an authorized service loca- Cleaning Discs tion. Fingerprints a
ページ6に含まれる内容の要旨
Types of Playable Discs Notes on Copyrights: Types of Playable Discs DVD It is forbidden by law to copy, broadcast, show, (8 cm / 12 cm disc) broadcast via cable, play in public, or rent copyright- ed material without permission. Audio CD and Video CD This product features the copy protection function (8 cm / 12 cm disc) developed by Macrovision. Copy protection signals are recorded on some discs. When recording and In addition, this unit plays Memory Card, DVD-R, playing the pictures of these
ページ7に含まれる内容の要旨
Card useable on this unit Using Memory Card Card useable on this unit Using Memory Card • Compact Flash Card (CF) 1. Insert a memory card. • Micro Drive (MD) 2. Press MEMORY on the Front panel while in DVD • Secure Digital Card (SD) mode. • Multi Media Card (MMC) The Memory Card slot choice menu appears on the TV screen. • eXtreme Digital picture Card (xD) • Memory Stick (MS) • Memory Stick Pro (MS-Pro) • Compatible with: FAT 12, FAT 16, or FAT 32 • Only use the memory cards recommended above. R
ページ8に含まれる内容の要旨
Front Panel Front Panel ab c d e DVD VCR REC PM TV fg hi j k lmnopq a 1 POWER The VCR deck is selected. VCR Switches the DVD+VCR ON and OFF. DVD+VCR is Recording.(VCR part only) REC b Disc Tray (DVD deck) Insert a disc here. Indicates PM time. (AM is not displayed.) PM c Z Z DVD Lights when TV mode is active. Opens or closes the disc tray. TV d Cassette Compartment (VCR deck) Indicates total playing time, Insert a video cassette here. elapsed time, remaining time or current deck status Z Z
ページ9に含まれる内容の要旨
Remote Control Remote Control POWER TV Control Buttons (see p. 35) Switches DVD+VCR ON and OFF. DISPLAY DVD Accesses On-Screen Display. Select the DVD+VCR function CLK/CNT mode to DVD. Switches between the clock, VCR tape counter and tape remain- Select the DVD+VCR function ing modes on the display. mode to VCR. FGDE OPEN/CLOSE Selects menu options. Opens and closes the disc tray. CH/TRK(+/-) EJECT Selects VCR channels. Ejects the tape in the VCR deck. Adjusts manually the tape’s pic- ture ons
ページ10に含まれる内容の要旨
Rear Panel Rear Panel Caution Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. abcde f gh ijk a ANT.IN g RF. OUT Connect the VHF/UHF/CATV antenna to this terminal. Connect to a TV with RF coaxial inputs. b VCR IN LINE 1 (VIDEO/AUDIO (Left/Right)) h COAXIAL (DIGITAL AUDIO OUT jack) Connect the audio/video output of an external source (DVD OUT) (Audio system, TV/Monitor, VCR, Camcorder). Connect to digital (coaxial) aud
ページ11に含まれる内容の要旨
To view or record a CATV channel Connecting an Antenna Connecting an Antenna 1 Tune the TV to the DVD+VCR output channel or Cable TV or Cable TV (CH 3 or 4). 2 Set the DVD+VCR channel selector to the cable aa Antenna: output channel. (Example: CH3) Disconnect the antenna from the rear of the TV and identify the antenna cable. If it is a round 75 ohm 3 Select a channel using the cable converter. coaxial cable connect it directly to the jack marked ANT.IN on your DVD+VCR. If your antenna cable
ページ12に含まれる内容の要旨
Connect the COMPONENT/PROGRESSIVE SCAN Rear of TV ANTENNA VIDEO AUDIO INPUT INPUT INPUT VIDEO OUT jacks on the DVD+VCR to the corre- L R sponding in jacks on the TV using an optional Y Pb Pr cable (C). Notes: R V A1 • The 480p and 720p resolutions are Progressive scan applied resolutions. Rear of DVD+VCR • Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack and S-VIDEO OUT jack). Resolution setting Resolution setting The resolution setting support only DVD pl
ページ13に含まれる内容の要旨
HDMI Connection HDMI Connection HDMI compatible TV HDMI If you have a HDMI TV or monitor, you can connect it to this DVD+VCR using a HDMI cable. 1. Set the TV’s source to HDMI (refer to TV’s Owner’s manual). H 2. Connect the HDMI OUT jack on the unit to the HDMI jack on a HDMI compatible TV or monitor (H). 3. Press RESOLUTION repeatedly to select the desired resolution. Notes : Rear of DVD+VCR • Both PCM and Bitstream Audio out are available, when the sample frequency is set to 48kHz in About H
ページ14に含まれる内容の要旨
Connection to an Amplifier Connection to an Amplifier Rear of DVD+VCR You can only listen to DVD playback using OPTICAL (O), COAXIAL (X) and AUDIO OUT (A2) connections. The tuner and VCR will still be heard through the RF.OUT (R) or DVD/VCR AUDIO OUT (A1) jack. (See page 12.) Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/Pro A1 A2 X Logic Connect the Left and Right AUDIO OUT (or DVD/VCR AUDIO OUT) jacks on the DVD+VCR to the audio left and right in jack
ページ15に含まれる内容の要旨
• AUTO CLOCK SET Initial Settings - VCR Initial Settings - VCR The Auto Clock Set feature is set to ON at the fac- tory. In the ON setting, the DVD+VCR looks for a By using the VCR Setup menu, you can make channel carrying XDS (Extended Data Services) various adjustments to items such as clock setting, information. XDS updates the clock using the and timer recordings. Coordinated Universal Time. Your DVD+VCR allows remote control adjustment of - Use b / B to choose ON or OFF. several features
ページ16に含まれる内容の要旨
TUNING SETUP This DVD+VCR is equipped with a frequency synthe- sized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125. Auto Channel Programming FUNCTION OSD The on-screen display can be turned on or off. AUDIO MODE The DVD+VCR has two separate audio playback sys- tems, the high quality VHS Hi-Fi system and standard 1. Choose the SOURCE SELECT option, then use NORMAL mono system. The same audio is generally b / B to sele
ページ17に含まれる内容の要旨
Displaying Disc Information Initial Settings - DVD Displaying Disc Information Initial Settings - DVD on-screen - DVD on-screen - DVD By using the DVD Setup menu, you can make vari- ous adjustments to items such as picture and sound. You can display various information about the disc You can also set a language for the subtitles and the Setup menu, among other things. For details on each loaded on-screen. Setup menu item, see pages 18 to 20. 1. Press DISPLAY to show various playback infor- mati
ページ18に含まれる内容の要旨
LANGUAGE AUDIO Each DVD disc has a variety of audio output options. Set this unit’s AUDIO options according to the type of audio system you use. Menu Language Select a language for the VCR and DVD’s setup menu and information display. Dolby Digital / DTS / MPEG Disc Audio / Subtitle / Menu Bitstream: Select “Bitstream” if you connect the Select the language you prefer for the audio track DVD+VCR’s DIGITAL AUDIO OUT jack to an (disc audio), subtitles, and the disc menu. amplifier or other equi
ページ19に含まれる内容の要旨
Password (Security Code) LOCK (Parental Control) You can enter or change password. 1. Select “Password” on the LOCK menu then press B. 2. Follow step 2 as shown previous page (Rating). To change the password, select the “Change”, press ENTER/OK and input the new 4-digit code then press ENTER/OK. Input it again to verify. 3. Press SETUP/MENU to exit the menu. Rating If you forget your Security Code Some movies contain scenes that may not be suitable for children to view. Many of these discs
ページ20に含まれる内容の要旨
DivX(R) VOD OTHERS ® We provide you the DivX VOD (Video On Demand) registration code that allows you to rent and purchase ® videos using the DivX VOD service. For more infor- mation, visit www.divx.com/vod. 1. Select “DivX(R) VOD” option then press B. 2. Press ENTER/OK while “Select” is selected and the registration code will appear. Use the registration code to purchase or rent the ® videos from DivX VOD service at www.divx.com/vod. Follow the instructions and PBC download the video onto a di
