ページ1に含まれる内容の要旨
CS-700
Owner's Manual
ページ2に含まれる内容の要旨
Table of Contents Chapter 1: Connecting Your System Chapter 4: Menu System Reading this Manual ......................................................................1 On screen menu system .............................................................. 20 Step-by-Step Connections .............................................................1 Navigating menus ........................................................................ 20 Step 1: Unpack the box .........................................
ページ3に含まれる内容の要旨
Index page i/ii Important Safety Information 1. READ these instructions. WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture. 2. KEEP these instructions. 3. HEED all warnings. WARNING: Batteries (battery pack or batteries installed) shall not be exposed to 4. FOLLOW all instructions. excessive heat such as sunshine, fire or the like. 5. DO NOT use this apparatus near water. WARNING: No naked flame sources – such as candles – should be pl
ページ4に含まれる内容の要旨
Thank You to deliver high sensitivity, low distortion, flat frequency response and wide Thank you for purchasing the Klipsch CS-700 System. After reading this dispersion, which translates to unequaled power, detail, and dynamics: the manual and connecting your system, you will hear the results of more than 60 hallmark of the “Klipsch Sound.” Please be sure to return the enclosed product years of stringent engineering and class-leading research and development. ® registration card or regist
ページ5に含まれる内容の要旨
Conne Ct Ions page 1/2 STeP 1: unpack the box Make sure you have the following items as you unpack your Klipsch system. 0 0 0 0 0 Controller Subwoofer Subwoofer Subwoofer Left/Right Speakers Left/Right Speakers Left/Right Speakers Setup Guide Owner’s Manual 0 0 0 0 0 Composite Video Left/Right Audio Cable Remote Control 2 AA Remote Batteries FM Antenna Cable (Yellow) (Red and (Red and (Red and White) White) White) 0 0 0 0 0 2 20-Ft. Left/Right Subwoofer Mini plug to AM Antenna Rubber Pads
ページ6に含まれる内容の要旨
STeP 3A: Set-Top Box Connection Use this connection if your TV has a cable box, satellite receiver or HD receiver set-top box connected to it. See next page (3B) if no set-top box is used. CABLE SIGNAL CABLE BOX (shown) CABLE IN O U T P U T S AUDIO COMPONENT DIGITAL L R Y PB PR COAXIAL OPTICAL HDMI OUT VIDEO S-VIDEO - OR - 2A OR - OR - 2B 2C 3A 3B 3D 3C - OR - KLIPSCH CONTROLLER 1. Disconnect the cable on your cable, satellite or HD set-top box that is 3. Connect the AUDI
ページ7に含まれる内容の要旨
Conne Ct Ions page 3/4 STeP 3B: TV Audio Connection Use this connection if you receive your TV signal via regular cable (no cable box) or with an off-air antenna. TV BACK PANEL COMPOSITE COMPONENT COMPONENT AUDIO / VIDEO INPUT 1 INPUT 2 INPUT 3 INPUT 4 OUTPUT OUTPUT R R Y Y Y R L L PB PB PB L V V PR PR PR V S-VIDEO S-VIDEO DIGITAL COAXIAL DIGITAL OPTICAL ANTENNA A ANTENNA B OUTPUT OUTPUT INPUT INPUT CABLE OR OFF-AIR ANTENNA 1B - OR - 1C - OR - 1A KLIPSCH CONTROLLER If you don't have a set-top
ページ8に含まれる内容の要旨
STeP 4: Connect Klipsch System to the TV's Input TV BACK PANEL COMPOSITE COMPONENT COMPONENT AUDIO / VIDEO INPUT 1 INPUT 2 INPUT 3 INPUT 4 OUTPUT OUTPUT R R Y Y Y R L PB L PB PB L V PR V V PR PR S-VIDEO DIGITAL COAXIAL DIGITAL OPTICAL ANTENNA A ANTENNA B HDMI OUTPUT OUTPUT INPUT INPUT INPUT - OR - 2 3 1 OR 4 OR 5 KLIPSCH CONTROLLER 1. If your TV doesn’t have HDMI or COMPONENT, but has S-VIDEO, 4. If your TV has an HDMI INPUT, connect the corresponding HDMI cable connect S-VIDEO cable (not
ページ9に含まれる内容の要旨
Conne Ct Ions page 5/6 STeP 5: Connect the Speakers LEFT RIGHT SPEAKER SPEAKER WIRELESS SUBWOOFER KLIPSCH CONTROLLER 1. After you uncoil the speaker cable, connect one speaker to the RIGHT 6'-15' Speaker Setup Considerations TELEVISION (Red) connector on the back of your Klipsch system. This speaker will SUB be to your left when you are behind the system connecting, but it will • Front speakers typically sound best L R be on the right when you are facing the system. You can connect either
ページ10に含まれる内容の要旨
STeP 6: Connect other components (OPTIONAL) VCR Back Panel RF IN INPUT OUTPUT L R L R RF OUT AUDIO VIDEO S-VIDEO 1 2 AUX 2 - Side Panel R - AUDIO - L VIDEO S-VIDEO You can connect other components, such as a VCR, another recording device Connecting headphones to heADPhONe OuTPuT (like a hard-disk drive product or DVD Recorder), or a video game system to For private listening, connect compatible headphones to the HEADPHONE your Klipsch system using the A
ページ11に含まれる内容の要旨
Conne Ct Ions page 7/8 STeP 7: Connect AM and FM Antennas (supplied) - OR - The back of your Klipsch System has jacks for the AM and FM antennas that STeP 8: Turn on the TV and the Klipsch System were packed with your system. Unwind the wires for each antenna to provide 1. Plug in the Klipsch system’s power cord to an AC power outlet. the best reception. An outdoor antenna may be used in place of the supplied 2. Turn on the Klipsch system (press the ON/OFF button on the front indoor antenna
ページ12に含まれる内容の要旨
STeP 9: Complete the On-screen Setup 1. Press MENU on your Klipsch system remote control (the main menu appears). 2. Press arrow down ç to highlight Setup and press ENTER (the Setup menu items appear). Match the on-screen option with the cables that are connected to each of the jacks on your Klipsch system. This information tells the system what is connected to it, and which cables and jacks were used. 3. TV Audio Connection: If you made a TV Audio connection, use the arrow button to sele
ページ13に含まれる内容の要旨
Conne Ct Ions page 9/10 4. TV Format: TV Format lets you choose between a standard TV screen and a Widescreen option. The Widescreen option has an aspect ratio of 16:9. If your TV has a 4:3 aspect ratio, select either the Standard or Letterbox option depending on your preference. 5. RDS (Radio Data System): RDS is the system that allows broadcasters to embed programming information in to the radio signal, such as the name of the artist or song. Your Klipsch system is RDS-enabled. If
ページ14に含まれる内容の要旨
Your Klipsch Controller ç SOURCE TUNINg ç PRESETS PLAY/PAUSE OPEN/CLOSE VOLUME POw ER ç ç Buttons Display SOURCE Chooses the function you want to use—radio, DVD P.SCAN MP3 WMA MPEG4 JPEG ANGLE TITLE TRK CHAP DOLBY A B ALL DVD/CD, watch TV, access any other components D I G I T A L PROG connected to your Klipsch system (VCR, video game CD RANDOM system, etc.). Each time you press the SOURCE bu
ページ15に含まれる内容の要旨
Conne Ct Ions page 11/12 The Basics Switching between media—TV, DVD, Radio, CDs, etc. Your Klipsch system is the center of your entertainment room...now, you just need to understand how to get from one type of entertainment to another. To move to a different type of media, press the corresponding button on the remote control (DISC, AM/FM, SAT/CAB) or keep pressing SOURCE on the front of your Klipsch system to access the different options. When you turn on your Klipsch system, it tunes to t
ページ16に含まれる内容の要旨
ChAPTeR 2: ReMOTe CONTROL The universal remote control that came packed with your Klipsch system can be programmed to operate the basic functions of many other brands of audio and video components, such as TVs, satellite receivers, cable boxes, DVD players, and others. The design of the remote control groups the buttons to help you achieve better performance from your remote. In this section of the manual, you will learn the function of each button and how to program it to operate o
ページ17に含まれる内容の要旨
ReMote Cont Ro L page 13/14 MUTE Reduces the audio to a minimum level. Press again to restore the volume. OPEN/CLOSE Opens and closes the disc drawer. POw E r Turns the Klipsch controller on and off and tunes it to the last selected input. If the remote is programmed to operate other components, the POw ER button is used together with the component buttons (AUX 1, TV, AUX 2, and SAT/CAB) to turn the components on and off. PLAY Begins playback of disc (or video tape if the
ページ18に含まれる内容の要旨
ChAPTeR 3: OPeRATION Compatible Discs Playing a disc • DVDs—DVD-R, DVD-RW, DVD+R, DVD+RW, and DVD-ROM. 1. Press DISC on the remote to put the Klipsch system in DVD mode or • CDs—Audio CDs, CD-R, CD-RW, CD-ROM, and CDs that contain toggle the SOURCE button on top of the unit. mp3 music files or JPEG (picture) files. 2. If the TV didn’t turn on and tune to the correct VIDEO INPUT channel • VCDs—Video CDs contain video and audio, but hold less information (you will see the Klipsch DVD screen),
ページ19に含まれる内容の要旨
ope Rat Ion page 15/16 DVD and VCD Playback Features You can use the remote control to access various features during playback if the disc was formatted to support the features. Transport To move forward or backward on the disc, simply press FORw ARD or REVERSE during playback. Each time you press FORw ARD or REVERSE, the speed will increase until the maximum search speed is reached. To resume playback, press PLAY. To advance through the disc’s chapters during playback, press the CHANNEL å
ページ20に含まれる内容の要旨
Navigating Info Banners Your Klipsch system is equipped with on-screen Info Banners that enable you to quickly access various playback features. The content of the banner changes depending upon the type of media you are playing, but the way you navigate the banners is the same. • To access the Info Banner, press INFO while the disc is playing. • To see the individual options of an info banner item, simply use the LEFT and RIgHT arrow buttons to highlight the option and press ENTER, or use the
