ページ1に含まれる内容の要旨
User Guide
DVD Recorder/VCR
NS-DRVCR
ページ2に含まれる内容の要旨
Caution: Welcome Class 2M visible and invisible laser radiation Congratulations on your purchase of this when open and interlocks defeated. Do not stare high-quality Insignia product. Your NS-DRVCR into the beam or view directly with optical DVD Recorder/VCR represents the state of the instruments. art in DVD/VCR recorders and is designed for reliable and trouble-free performance. Most recorder manufacturers recommend Caution their recorders be placed upon a dedicated Contents circuit.
ページ3に含まれる内容の要旨
NS-DRVCR DVD Recorder/VCR � Accessories–Do not place your recorder on an unstable cart, stand, tripod, bracket, or table. Your recorder may fall, causing serious 7 injury to someone and serious damage to your recorder. Use only with a cart, stand, 6 tripod, bracket, or table recommended by the manufacturer, or sold with your recorder. 5 If you mount your recorder, 4 follow the manufacturer's 3 instructions and use a 1 mounting accessory 2 recommended by the manufacturer. Move a record
ページ4に含まれる内容の要旨
NS-DRVCR DVD Recorder/VCR � If your recorder does not operate normally Introduction by following the operating instructions. Adjust only those controls that are To ensure correct use of your recorder, read this covered by the operating instructions, owner’s manual carefully and retain for future because incorrect adjustment of other reference. controls may result in damage and often About the symbol requires extensive work by a qualified technician to restore your recorder to its The
ページ5に含まれる内容の要旨
NS-DRVCR DVD Recorder/VCR Disc Characteristics � Depending on the conditions of the Note recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some DVD-R (DVD - Recordable) CD-R/RW (or DVD±R/RW) discs � These DVDs can be recorded only cannot be played on the recorder. once. After you finalize a DVD-R, you � Do not attach any seal or label to cannot record on it or edit it. either side (the labeled side or the � DVD-Rs can be only formatted to recorded side) of a disc. Video mode
ページ6に含まれる内容の要旨
NS-DRVCR DVD Recorder/VCR CPRM copy protection CPRM is a copy protection system (with scramble system) only allowing the recording of ‘copy once’ broadcast programs. CPRM stands for Content Protection for Recordable Media. Your recorder is CPRM compatible, which means that you can record copy-once broadcast programs, but you cannot then make a copy of those recordings. CPRM recordings can only be made on DVD-RWs formatted in VR mode and CPRM recordings can only be played on players that
ページ7に含まれる内容の要旨
NS-DRVCR DVD Recorder/VCR Controls and connections Front panel 1 4 2 3 8 13 6 5 11 12 14 16 7 9 10 15 17 Item Description Function Item Description Function 11 Display Shows the current status of the 1Disc tray (DVD Place a disc on the tray when it window recorder. deck) opens. lights when a disc is in the DVD deck. 2 Press to open or close the disc DVD lights when the DVD deck tray. DVD button is selected. 3 Cassette Insert the video cassette here. lights when the recorder compartmen
ページ8に含まれる内容の要旨
NS-DRVCR DVD Recorder/VCR Back panel Item Description Function 17 VIDEO/AUDIO Connect the audio/video output of an external source (such as an audio system, TV, monitor, VCR, or camcorder) to these jacks. 3 2 7 5 6 8 4 1 9 10 11 Do not touch the inner pins of the jacks on Caution Item Description Function the back panel. Electrostatic discharge may cause permanent damage to the recorder. 1 ANT. IN Connect the antenna cable to this jack. 2 S-VIDEO OUT Connect to the S-Video input jack on
ページ9に含まれる内容の要旨
NS-DRVCR DVD Recorder/VCR Remote control Item Button Function 2 12 Press to close the on-screen RETURN 3 display and return to normal viewing. 1 13 CHP. ADD Press to insert a chapter 35 marker when playing or 4 recording a DVD. 34 14 ZOOM Press to enlarge the DVD image to 2, 3, or 4 times the 33 original size. 5 6 32 15 THUMBNAIL Press to select a thumbnail 7 31 picture for the current title in the 8 30 Title List menu. 9 29 10 28 11 16 TITLE Press to display the title menu of the DVD,
ページ10に含まれる内容の要旨
NS-DRVCR DVD Recorder/VCR Item Button Function � The system uses a polarized AC plug Warning with one wide blade and one narrow 32 DVD - Press to search blade. The plug will only fit into backward or forward. matching polarized power outlets. This BACKWARD is a safety feature to reduce the VCR - Press to search a tape and possibility of electric shock. If the plug on fast backward or forward. In FORWARD will not fit in your power outlets, you STOP mode, press to rewind or probably ha
ページ11に含まれる内容の要旨
NS-DRVCR DVD Recorder/VCR To connect the recorder to an antenna: Video connection � Disconnect the antenna from the back of the To connect to your TV with a video cable: TV and identify the antenna cable. � Connect the VIDEO OUT jack on the If your antenna cable is a round 75 ohm recorder to the VIDEO IN jack on the TV coaxial cable, connect it directly to the jack using the video cable supplied. marked ANT. IN on your recorder. - OR - If you use this connection, set the TV’s Note If your
ページ12に含まれる内容の要旨
NS-DRVCR DVD Recorder/VCR Connecting to an amplifier � Due to the DTS Licensing agreement, Note the digital output will be in DTS digital out when DTS audio stream is selected. � If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. � To play six-channel digital surround sound though a digital connection, your receiver must have a Digital Multi-channel decoder. � To see the aud
ページ13に含まれる内容の要旨
NS-DRVCR DVD Recorder/VCR 3 Close the battery holder. Connecting a digital camcorder DV digital camcorder � Use only the size and type of batteries Caution specified. � Make sure that you follow the correct polarity as indicated in the battery compartment. Reversed batteries may damage the device. � Do not mix different types of batteries together (for example, Alkaline and Carbon-Zinc) or old batteries with new ones. Front of recorder � If the remote is not to be used for a long period
ページ14に含まれる内容の要旨
NS-DRVCR DVD Recorder/VCR 4 Select Auto or Manual to set the clock, then Buttons Operations press ENTER. Auto BACKWARD Press to scan backward. In STOP mode, rewinds the tape. () � Press / to choose your Time Zone. Note: After 3 minutes in SEARCH mode � Press to choose the Daylight Savings the recorder returns to PLAY mode to option. Press / to choose Auto, ON, protect the tape and video heads. or OFF. CLEAR Press to reset the current tape counter to � Press ENTER to confirm your setting.
ページ15に含まれる内容の要旨
NS-DRVCR DVD Recorder/VCR Buttons Operations Discs Buttons Operations Discs Press to pause playback. All PLAY MODE Press during playback to select PAUSE ( ) the play mode you want. A-—Repeats a sequence Press repeatedly to play between A (start point) and B DVD ALL DVD ALL frame-by-frame. (end point) during playback. Press ENTER at the selected Note: You can also use the ACD end point, then the repeat / buttons to step sequence begins. Karaoke backward or forward while in DVD PAUSE mod
ページ16に含まれる内容の要旨
NS-DRVCR DVD Recorder/VCR Buttons Operations Discs Menu Available options AUDIO Press AUDIO then press the � DISC: Displays the Photo menu for Photo DVD a disc. / buttons repeatedly (See “Photo repeatedly to hear a different menu options” audio language or audio track. on page 20) Note: Some discs feature both Dolby Digital and DTS � DISC: Displays the Music (or Audio Music soundtracks. There is no CD) menu for a disc. (See “Audio analog audio output when DTS CD and Music is selecte
ページ17に含まれる内容の要旨
NS-DRVCR DVD Recorder/VCR Menu Available settings Menu Available settings Display Menu–You can select a Initialize–Formats a DVD for recording. Language Disc language for the setup menu and For DVD-RWs, you can choose VR Mode Settings Settings information display. or Video Mode. For DVD+RWs you can choose OK. Disc Menu–You can select a language for the DVD menu. Caution: If you change the format of a DVD, the disc is erased. Disc Audio–You can select a language for the DVD audio. Finaliz
ページ18に含まれる内容の要旨
NS-DRVCR DVD Recorder/VCR Displaying disc information on screen Time search DivX DVD ALL You can display various information about the disc or tape loaded on screen. Some items can To start playing at a selected time on the disc: be changed using the menu. 1 Press DISPLAY twice during playback. The time search box shows the elapsed playing To display disc information on screen: time. 1 Press DISPLAY once to show current status. 2 Press / to select the time clock icon. Example: DVD-RW in VR
ページ19に含まれる内容の要旨
NS-DRVCR DVD Recorder/VCR Playable Codec format Last scene memory DVD “DIV3”, “DIV4”, “MP43”, “DIVX”, “XVID”, “DX50”, Your recorder memorizes last scene from the “DXSB”. last disc that is viewed. The last scene remains Playable Audio format in memory even if you remove the disc from the recorder or switch off the recorder. If you load a “AC3”, “PCM”, “MP2”, “MP3”, “WMA”. disc that has the scene memorized, the scene is � Sampling frequency: within 8 - 48 kHz (MP3), automatically recalled.
ページ20に含まれる内容の要旨
NS-DRVCR DVD Recorder/VCR To play an audio CD or MP3/WMA files: 3 To return to normal playback, select Random again. then press ENTER. 1 Press HOME. The Home menu opens. 2 Select Music, DISC, then press ENTER. The Audio CD or Music menu opens. Note By pressing SKIP ( / ) during random playback, the recorder 3 Press / to select a track or file, then selects another track and resumes random press PLAY ( ). Playback starts. playback You can use variable playback functions as described in “S
