ページ1に含まれる内容の要旨
3-091-712-12 (1) US
DVD Player/
Video Cassette
Recorder
Operating Instructions
For customers in the USA
If you have any questions about your Sony DVD-VCR, you may call Sony Customer
Information Services Company at 1-800-VHS-SONY (847-7669).
For all other Sony product questions, please call Sony Customer Information Services
Company at 1-800-222-SONY (7669).
Or write to: Sony Customer Information Services Company 12451 Gateway
Boulevard Ft. Myers, FL 33913
For Customers in Canada
If this pro
ページ2に含まれる内容の要旨
WARNING Welcome! To prevent fire or shock Thank you for purchasing this CAUTION hazard, do not expose the Sony DVD Player/Video Cassette TO PREVENT ELECTRIC unit to rain or moisture. Recorder. Before operating this SHOCK, MATCH WIDE BLADE To avoid electrical shock, do player, please read this manual OF PLUG TO WIDE SLOT, not open the cabinet. Refer thoroughly and retain it for future FULLY INSERT. servicing to qualified reference. For customers in the U.S.A personnel only. Owner’s Recor
ページ3に含まれる内容の要旨
Important Safety DVD Precautions Instructions On safety 1 Read these instructions. Caution – The use of optical instruments with 2 Keep these instructions. this product will increase eye hazard. 3 Heed all warnings. To prevent fire or shock hazard, do not place 4 Follow all instructions. objects filled with liquids, such as vases, on the 5 Do not use this apparatus near water. apparatus. 6 Clean only with dry cloth. Should any solid object or liquid fall into the 7 Do not block any ven
ページ4に含まれる内容の要旨
SLV-D550P/SLV-D350P Corrections Please correct the supplied Operating Instructions as follows: “AUDIO SETUP” menu (page 65) Incorrect Correct AUDIO SETUP AUDIO SETUP Dolby Digital Dolby Digital [ D-PCM ] [ D-PCM ] DTS [ Off ] DTS [ Off ] Audio DRC [ Wide Range ] Audio DRC [ Standard ] V v B b RETURN SET UP V v B b RETURN SET UP Menu choices • Audio DRC (Dynamic Range Control) (Page 66) Incorrect Wide Range Gives you the feeling of being at alive performance. TV Mode Makes the low sounds clear e
ページ5に含まれる内容の要旨
Table of contents 2 WARNING 2 Welcome! 2 General Precautions 3 Important Safety Instructions 3 DVD Precautions 6 About this manual 6 This player can play the following discs 8 Notes about discs Getting Started 9 Step 1 : Unpacking 10 Step 2 : Setting up the remote commander 13 Step 3 : Basic hookups 20 Step 4 : Selecting a language 22 Step 5 : Setting the clock 26 Step 6 : Presetting channels ® 30 Step 7 : Setting up the VCR Plus+ system (SLV-D550P only) Basic Operations Advanced Hookups 33 Pla
ページ6に含まれる内容の要旨
DVD Additional Operations Caution 76 Using the DVD’s menu For use of the VCR Television programs, films, video tapes and 78 Zooming into a scene other materials may be copyrighted. 79 Changing the angles Unauthorized recording of such material may 80 Displaying the subtitle be contrary to the provisions of the copyright 81 Various play mode functions laws. Also, use of this recorder with cable (Program play, Shuffle play, Repeat television transmission may require authorization fro
ページ7に含まれる内容の要旨
About this manual This player can play the following discs Check your model name The instructions in this manual are for the 2 Format of discs models: SLV-D550P and SLV-D350P. Check DVD VIDEO your model name by looking at the rear panel of your DVD-VCR. SLV-D550P is the model used for illustration purposes. Any difference in operation is DVD-RW clearly indicated in the text, for example, “SLV-D550P only”. VIDEO CD This manual mainly explains operations using the remote, but the same
ページ8に含まれる内容の要旨
Example of discs that the player Note on playback operations of cannot play DVDs and VIDEO CDs The player cannot play the following discs: Some playback operations of DVDs and VIDEO • All CD-ROMs (including PHOTO CDs)/CD- CDs may be intentionally set by software Rs/CD-RWs other than those recorded in the producers. Since this player plays DVDs and following formats: VIDEO CDs according to the disc contents the – music CD format software producers designed, some playback – video CD format
ページ9に含まれる内容の要旨
Notes about discs To keep the disc clean, handle the disc by its edge. Do not touch the surface. Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature may rise considerably inside the car. After playing, store the disc in its case. Clean the disc with a cleaning cloth. Wipe the disc from the center out. Do not use solvents such as benzine, thinner, commercially available cleaners, or anti-
ページ10に含まれる内容の要旨
Getting Started Getting Started Step 1 : Unpacking Check that you have received the following items with the DVD-VCR: Remote commander 75-ohm coaxial cable with F-type connectors Size AA (R6) batteries Audio/video cord (pinplug ×3 y pinplug ×3) Note The supplied remote commander is for the exclusive use of this DVD-VCR. 9 Unpacking
ページ11に含まれる内容の要旨
Step 2 : Setting up the remote commander Inserting the batteries Insert two size AA (R6) batteries by matching the + and – on the batteries to the diagram inside the battery compartment. Insert the negative (–) end first, then push in and down until the positive (+) end clicks into position. Remote sensor Using the remote commander You can use this remote commander to operate this DVD- VCR and a Sony TV. Buttons on the remote commander marked with an orange dot () can be used to ope
ページ12に含まれる内容の要旨
Getting Started Controlling other TVs with the remote commander The remote commander is preprogrammed to control non-Sony TVs. If your TV is listed in the following table, set the appropriate manufacturer’s code number. Set TV / DVD·VIDEO at the top of the remote commander to TV. 1 Hold down ?/1, and enter your TV’s code number using the number buttons. 2 Then release ?/1. Now you can use the ?/1, VOL +/–, CH +/–, MUTING*, TV/VIDEO and ENTER* buttons to control your TV. You can also use t
ページ13に含まれる内容の要旨
Notes If you enter a new code number, the code number previously entered will be erased. If the TV uses a different remote control system from the one programmed to work with the DVD-VCR, you cannot control your TV with the remote commander. When you replace the batteries of the remote commander, the code number may change. Set the appropriate code number every time you replace the batteries. 12 Setting up the remote commander
ページ14に含まれる内容の要旨
Getting Started Step 3 : Basic hookups Before you get started Be sure to disconnect the AC power cord of each component before connecting. Turn off the power to all equipment. Do not connect the AC power cords until all of the connections are completed. If you connect the AC power cord before the connections are completed, you may not be able to use the Plug and Play function. Be sure you make connections firmly. Loose connections may cause picture distortion. If your TV does not
ページ15に含まれる内容の要旨
Audio/video (A/V) hookup If your TV has audio/video (A/V) input jacks, you will get better picture and sound if you hook up your DVD-VCR using these connections. If your TV does not have A/V inputs, see the following pages for antenna or cable hookups. Note that “Advanced Hookups” (page 61) explains additional hookup methods that will optimize the picture and sound for a true “hometheater” experience. If you are not planning to use your DVD-VCR to record programs, you only need to make th
ページ16に含まれる内容の要旨
Getting Started Hookup 1 (Plug and Play) Antenna hookup Make the following connections if you are using an antenna (if you do not have cable TV). A Use this hookup if you are using: VHF/UHF antenna (you get channels 2–13 and channels 14 and higher) UHF-only antenna (you get channels 14 and higher) Separate VHF and UHF antennas Rear of TV VHF/UHF Match the type of A connector on your or TV: A, B, or C. VHF DVD-VCR B UHF or VHF C UHF B Use this hookup if you are using a VHF-only antenna
ページ17に含まれる内容の要旨
Hookup 1 : DVD-VCR setup Plug the DVD-VCR into an AC outlet. The DVD-VCR automatically presets the DVD-VCR’s clock and TV channels when the DVD-VCR is plugged into the AC outlet. to AC outlet AC power cord The DVD-VCR starts presetting the clock and channels. When Auto preset is completed, the current time appears in the display window. You have now completed DVD-VCR setup. To change the on-screen display language to French or Spanish, see “Step 4 : Selecting a language” on page 20. The clo
ページ18に含まれる内容の要旨
Getting Started Hookup 2 (Plug and Play) You have no cable box, or a cable box with only a few scrambled channels Recommended use Use this hookup if you do not have a cable box. Also use this hookup if your cable system scrambles only a few channels. What you can do with this hookup Record any unscrambled channel by selecting the channel on the VCR What you cannot do Record scrambled channels that require a cable box DVD-VCR Rear of TV Wall VHF/UHF A Match the type of connector on your
ページ19に含まれる内容の要旨
Hookup 2 : DVD-VCR setup Plug the DVD-VCR into an AC outlet. The DVD-VCR automatically presets the DVD-VCR’s clock and TV channels when the DVD-VCR is plugged into the AC outlet. to AC outlet AC power cord The DVD-VCR starts presetting the clock and channels. When Auto preset is completed, the current time appears in the display window. You have now completed DVD-VCR setup. To change the on-screen display language to French or Spanish, see “Step 4 : Selecting a language” on page 20. The clo
ページ20に含まれる内容の要旨
Getting Started Hookup 3 Connecting a cable box with many scrambled channels Recommended use Use this hookup if your cable system scrambles all or most channels. What you can do with this hookup Record any channel by selecting the channel on the cable box What you cannot do Record with the cable box turned off Record one channel while watching another channel Cable box Rear of TV Wall VHF/UHF A Match the type of connector on your TV: A, B, or C. or VHF B For connector UHF or types B an
