ページ1に含まれる内容の要旨
TOSHIBA
STORAGE DEVICE DIVISION
SD-R5112
DVD-R/-RW DRIVE
PRODUCT SPECIFICATION
MARCH 2003
REV. 1.0
Specifications are subject to change without notice
DOCUMENT NUMBER
16004
ページ2に含まれる内容の要旨
LIMITATION OF LIABILITY Those warranties in the express warranty separately agreed between TOSHIBA and your company are the only warranties given to the consumer and are in lieu of any other warranties, whether express or implied with regard to this component. TOSHIBA expressly and unequivocally disclaims the warranties of merchantability and fitness for a particular purpose. Further, TOSHIBA disclaims all express warranties created by any individual or entity installing this device into a compu
ページ3に含まれる内容の要旨
DO NOT use this equipment in the system such as medical equipment which may cause personal injury or property damages resulting from malfunction of this equipment and unexpected data corruption or data error in reading operation. 4. Turn off the power for this equipment and wait more than one (1) minute before you eject the disc using the emergency eject mechanism when a disc cannot be ejected for some reasons in order to avoid the risk of damages to the disc. Notice 1. Turn off the system power
ページ4に含まれる内容の要旨
6. As for mounting bracket to incorporate this product into an equipment, (1) When this product is incorporated into an equipment by using the mounting screw holes in the right and left side planes, the clearance between this product and the mounting bracket is too wide; (2) When this product is incorporated into an equipment by using the mounting screw hole in the bottom, the surface of the mounting bracket is contorted. If you use such mounting bracket as the above, this product will become d
ページ5に含まれる内容の要旨
7. In the market, there are some drives or players that maintain to read CD or DVD disc, though, they may not designed to read CD-RW or DVD-RW disc. When you try to read the CD-RW or DVD-RW disc written by this product using other drives or players, please make sure that the equipment is applicable to CD-RW or DVD-RW disc. 8. In the instruction manual of your product, statement described in “Safety Instruction Manual “attached to this product, the statement described in " Cautions " above, the s
ページ6に含まれる内容の要旨
Contents 1. Introduction ---------------------------------------------------------------------------------------------------------------------- 1 2. Features -------------------------------------------------------------------------------------------------------------------------- 1 3. Specifications ------------------------------------------------------------------------------------------------------------------ 2 3.1. Performance -----------------------------------------------------------------
ページ7に含まれる内容の要旨
7.2. Current Drain ------------------------------------------------------------------------------------------------------- 22 7.2.1.Sleep ------------------------------------------------------------------------------------------------------------ 22 7.2.2. Standby ---------------------------------------------------------------------------------------------------------- 22 7.2.3. Continuous Read ------------------------------------------------------------------------------------------- 22 7.2.4.
ページ8に含まれる内容の要旨
1. Introduction This document describes TOSHIBA's SD-R5112 DVD-R/-RW Drive. 2. Features This drive reads DVD CSS (Contents Scramble Systems) Disc. This drive reads digital data stored on CD-ROM, DVD-ROM and CD audio discs. This drive read and records the digital data on DVD-R/-RW and CD-R/RW discs. This drive reads digital stored on DVD-ROM discs at maximum 12 times faster rotational speed. This drive reads digital stored on CD-ROM discs at maximum 40 times faster rotational speed. This drive r
ページ9に含まれる内容の要旨
3. Specifications 3.1.Performance (1) Applicable Write Format DVD-R :Disc at once, Incremental write DVD-RW :Disc at once, Incremental write, Restricted overwrite CD-R/RW :Disc at once, Track at once, Session at once,Packet write 1 (2) Applicable Write Disc * DVD-R :DVD-R for General (Ver.2.01) Optional Spec. Rev.1.0 DVD-RW :DVD-RW (Ver1.1) Optional Spec. Rev.1.0 CD-R/RW : CD-DA, CD+(E)G, CD-MIDI, CD-ROM, CD-ROM XA, MIXED MODE CD, CD-I, CD-I Bridge (Photo-CD, Video-CD) Multisession CD (Photo-CD
ページ10に含まれる内容の要旨
(5) Rotational Speed DVD (Single) : Approx. 7,580 rpm (5.0-12X CAV) DVD (Dual) : Approx. 5,053 rpm (3.3-8X CAV) DVD-R Ver.1.0 : Approx. 3,200 rpm (2-4.8X CAV) DVD-R Ver.2.0 : Approx. 2,780 rpm (2-4.8X CAV) DVD-RW Ver.1.1 : Approx. 2,780 rpm (2-4.8X CAV) DVD-Video (CSS-Disc) : Approx. 2,780 rpm (2-4.8X CAV) DVD-R Ver.2.0 (Write) : Approx. 550-1,390 rpm (1X CLV) : Approx. 1,100-2,780 rpm (2X CLV) : Approx. 2,200-5,560 rpm (4X CLV) DVD-RW Ver.1.1 (Write) : Approx. 550-1,390 rpm (1X CLV) : Approx. 1
ページ11に含まれる内容の要旨
(7) Access Time 2 Average Random Access Time DVD* : 130 ms Typ 3 CD* : 110 ms Typ 4 DVD-RAM* : 200 ms Typ 5 Average Random Seek Time DVD* : 120 ms Typ 6 CD* : 105 ms Typ 7 DVD-RAM* : 160 ms Typ 8 Average Full Stroke Access Time DVD* : 210 ms Typ 9 CD* : 180 ms Typ 10 DVD-RAM* : 400 ms Typ (8) Spin up Time ( Focus Search Time and Disc Motor Start up Time ) DVD : 2.0 s Typ DVD-RAM : 2.0 s Typ CD : 2.0 s Typ (9) Data Buffer Capacity 2,048 KByte *1: All disc written in CD or DVD formats, except CD-D
ページ12に含まれる内容の要旨
(9) Load/Eject (a) Electrical Load/Eject (Eject Button) (b) Load/Eject by ATAPI command (c) Emergency Eject (10) Air Flow Not Required (11) Acoustic Noise 40 dB (IEC 179 A weighted at 1 m) (12) Power Supply +5 V , +12 V (details in Section 7) 3.2. Environmental Conditions This drive should be used under the conditions listed below. 3.2.1.Temperature and Humidity *1 (1) Operating Temperature 5 °C to 50 °C (2) Storage Temperature -10 °C to 60 °C *2 (3) Shipping Temperature -40 °C to 65 °C (4) Oper
ページ13に含まれる内容の要旨
3.2.2.Dust and Dirt unspecified 3.2.3.Vibration (1) Operating (1 Oct/min) -------------------------- no hard error ----- 2 5 to 500 Hz 2.45 m/s [0.25 G] (0-p) (excluding resonance point) (2) Operating (Write) (1 Oct/min) ---------------- no hard error ----- 2 5 to 500 Hz 2.45 m/s [0.25 G] (0-p) (excluding resonance point) (3) Non-operating (1 Oct/min) --------- no damage ----- 5 to 10 Hz 5 mm (p-p) 2 10 to 500 Hz 9.8 m/s [1 G] (0-p) (4) Shipping (Packaged) (1 Oct/min) ----- no damage ----- 2 10
ページ14に含まれる内容の要旨
3.3. Installation Conditions Mount the drive within 20° of the horizontal positions and within 10° of the vertical positions 20° 20 20 20 20° ° ° ° 20° 20° a) Horizontal position 10° 10° 10° 10° b) Vertical position Figure 1 Installation position 3.4. Dimension and Mass ----- See Figure 2 for details ----- (1) External Dimensions (W x H x D) 146 mm x 41.5 mm x 189.5 mm (excluding bezel) (2) Mass (Weight) 1.0 kg (Net) 11.0 kg (Bulk Packaged 10pcs.) 16.0 kg (Bulk Packaged 15pcs.) *Probability 7/2
ページ15に含まれる内容の要旨
(Unit:mm) Figure 2-1 External Dimensions 8/29 SD-R5112 Rev.1.0 +0.7 189.5 -0.4
ページ16に含まれる内容の要旨
(Unit:mm) Figure 2-2 External Dimensions 9/29 SD-R5112 Rev.1.0
ページ17に含まれる内容の要旨
3.5. Reliabilites 3.5.1. Error Rate (1) Hard Read Error Rate (Byte Error Rate) ----- Allowing 5 Retries(default) ----- -15 DVD: 10 Max -15 CD: Mode 1:10 Max -12 Mode 2:10 Max -6 (2) Seek Error Rate --- Allowing 5 Retries 10 Max (default) 3.5.2. MTBF 100,000 h Assumptions: Power On Hours 5,436 h/year On/Off Cycles 313 cycles/year Number of Access 600,000 accesses/year Operating Duty Cycle (Read) 20 % of Power On Time (Reading/Seeking) Operating Duty Cycle (Write) 2 % of Power On Time (Writing/
ページ18に含まれる内容の要旨
Figure 3 Configuration 11/29 SD-R5112 Rev.1.0 DVD-R/-RW DRIVE MODEL SD-R5112 BLOCK DIAGRAM TA1365AF Headphones Wobble Filter TC94A38F (Option) Laser Contrl RF Amp EQL SRAM Data Slicer PLL PUH Disc Motor Tracking Amp Demodulator Loading Digital Focus Amp ECC EDC Motor Feed Motor Audio De-Scramble Command Dec. Position Memory Controller A/D Converter BD7908 Detector Muting Power Driver D/A Audio D/A Track EQL Analog Power Driver D/A Digital Audio Decoder Audio Focus EQL Power Driver Digit
ページ19に含まれる内容の要旨
5.Functions 5.1. Disc Data Configurations 5.1.1. DVD-ROM Data Configurations Figure 4 shows how data is constructed in the case of dual layer/parallel track data DVD disc. The DVD spec defines the single layer, the dual layer/opposite and parallel track disc, that the DVD-ROM drive supports. For details refer to DVD Book Part 1. 1 block=1/676 s ID Data (Dual layer Parallel track path) Layer Information ID No. No. ID No. Lead-in xxh - 2FFFFh 1 - Disc ID Data(4B) Area Sector Format Type
ページ20に含まれる内容の要旨
5.1.3. CD-R / CD-RW Data Configurations Before writing CD-R / CD-RW disc contains time-code information called ATIP. ATIP is abbreviation of "Absolute Time In Pre-groove" in the wobbling groove by modulating the carrier frequency. (Address information is pre-formatted to ATIP on the CD-R / CD-RW disc and method for the guide groove to wobble by FM modulation.) Figure 6 shows the composition of ATIP. Synchronization (4 bit) (n-1) Address Min (8 bit) n Address Sec (8 bit) n+1 Address Frame (8 bit
