ページ9に含まれる内容の要旨
Introduction Discsyoucanuse Welcome to the growing family of owners of PHILIPS equipment. Thank you for buying a HDRW 720/00-02 . The following discs can be used in your DVD recorder for playback and recording: Recordingandplayback DVD+RW (Digital Versatile Disc + rewriteable) uses phase change media, the same technology on which rewritable CDs are based. A high-performance laser is used to change the reflective properties of the recording layer; this process can be repeated more than a thousand
ページ10に含まれる内容の要旨
Introduction Super Video CD Important ACaution!Visibleandinvisiblelaserradiation.Ifthecoveris CD-R (CD-Recordable) with Audio/MP3 content open,donotlookatthebeam. Becauseoftheriskofeyeinjuries,onlyqualifiedservice engineersshouldopenthedeviceandcarryout maintenanceorrepairwork. CD-RW (CD-Rewritable) with Audio/MP3 content Regionalcode DVDs must be marked 'ALL' for all regions or '2' for ALASER region 2 to work in this device. Regional code 2 includes: Typ: Semiconductor lasers InGaAlP (DVD), AlG
ページ11に含まれる内容の要旨
Introduction recorder needs this time to acclimate to its new environment Symbolsusedintheseoperating (temperature, relative humidity, etc.). instructions BWhen installing the recorder in a cupboard, ensure there is a gap of approximately 5 cm (2 inch) around the recorder to enable air The following symbols will facilitate the use of these operating to circulate freely and prevent overheating. instructions. 1 Step(s) for carrying out an operation. BMake sure that no objects or liquids enter into
ページ12に含まれる内容の要旨
Introduction SpecialfunctionsofyourDVDrecorder Your PhilipsDVD recorder has a number of special functions to make it easier to use and to enhance your enjoyment. You can operate the main functions on your television using your DVD-Recorder recorder remote control, even if your television is not a Philips. You can upgrade the software of your DVD-Recorder with a CD-ROM. On the web site http://www.p4c.philips.com under the model number 'HDRW 720/00-02' you will find the data and the upgrade inform
ページ13に含まれる内容の要旨
Introduction The Philips DVD recorder can play back pre-recorded DVDs and CDs. DVDs recorded using this DVD recorder can be played back on current and future DVD players. Dolby Digital is a standard developed by Dolby Laboratories for transmitting from 1 to 5 full-range channels as well as a low frequency (.1) channel for a total of 5.1 discrete channels. The loudspeakers are arranged front left, front middle, front right, rear left and rear right. This system is currently the most common system
ページ14に含まれる内容の要旨
Introduction Enter the serial number here. You will need it for service queries or if your machine is stolen. The serial number (PROD. NO.) is printed on the type plate at the back or bottom. MadeinHungary 220-240V 50/60Hz38W MODELNO. HDRW720/00-02 PROD.NO. _______________________ This product complies with the requirements of the following directives and guidelines: 73/23/EWG (Low voltage directive) + 89/336/EWG (EMV-Directive) + 93/68 EWG (CE-Marking). This manual was in consideration of IEC 6
ページ15に含まれる内容の要旨
ConnectingtheDVDrecorder UsingyourDVD Recorderremotecontrol Preparingtheremotecontrolfor withyourTVset operation With the enclosed multicode remote control you can control the main The remote control and its batteries are packed separately in the functions of your TV set. To do this, you must first enter a code original DVD recorder packaging. You must install the batteries in the number that corresponds to the make of your TV set. remote control before use - described in the following section.
ページ16に含まれる内容の要旨
ConnectingtheDVDrecorder Connectingtotheaerial ConnectingtotheTV To receive TV programmes you have to connect the DVD-recorder to Choose from the following connections: the aerial or the cable network. Connectionwithscartcable 1 Switch off your TV set. ConnectionwithS videocable ConnectionwithVideo(CVBS)cable 2 Remove the aerial cable plug from your TV set. Insert it into the ANTENNA IN socket at the back of the DVD recorder. Connectionwiththeaerialcableonly 3 Insert one end of the supplied aeri
ページ17に含まれる内容の要旨
ConnectingtheDVDrecorder ConnectionwithanS Video(Y/C)cable Connectionwithvideo(CVBS)cable This connecting cable, also known as the SVHS cable, is used to This cable, usually with yellow Cinch connectors, is used for transmit the brightness signal (Y signal) and colour signal (C signal) transmitting the Composite Video signal (FBAS, CVBS). In this method separately. This mini DIN socket/plug is also called a Hosiden of transmission the colour signal and the brightness signal are socket/plug. tran
ページ18に含まれる内容の要旨
ConnectingtheDVDrecorder Connectingtothemains Always check if the local mains voltage matches the voltage range printed on the type plate at the back or bottom of the DVD-recorder. If not consult your dealer or the customer support from your country. 1 Switch on the TV set. 2 Insert one end of the supplied mains cable into the mains socket 4MAINS at the back of the DVD recorder and the other end into the wall socket. P The most important features of the DVD recorder will appear in scrolling text
ページ19に含まれる内容の要旨
Connectingadditionaldevices Connectinganexternalreceiver Connectingadditionaldevicestothe 1 Connect thescartsocket of the receiver (satellite receiver, secondscartsocket set-top box, cable TV box,...) provided for the TV set (usually labelled 'TV', 'TO TV',...) with the EXT2 AUX-I/O socket of the DVD recorder. O If your external receiver offers several options for the signal available at the 'TV', 'TO TV',... socket, choose the 'RGB' setting. Whycan'tIusethe'VCR','TOVCR',...socket? In order to a
ページ20に含まれる内容の要旨
Connectingadditionaldevices Connectingadditionaldevicesonlyvia Connectcamcordertothefront aerialcable sockets If you want to connect additional devices (e.g. satellite receiver...) only To copy camcorder recordings, you can use the front sockets. These via aerial cable, please observe the following: sockets are located behind the flap on the right hand side. The DVD-Recorder must be connected directly to the TV set. If there Recordings from the front sockets were stored on the HDD to make is a v
ページ1に含まれる内容の要旨
Tableofcontents
'Setup' ................................................................................................................ 30
Overviewoffunctions ......................... 1
Installation of the 'External receiver 1' ...................................................... 30
Functioning of the device ................................................................................ 1 Finalise set-up .......................................................................................
ページ2に含まれる内容の要旨
Tableofcontents Playing a DVD video disc .............................................................................. 56 'Record mode' ................................................................................................. 71 Playing a DVD+RW/ +R disc ....................................................................... 57 'Camera mode' ................................................................................................ 71 Playing an audio CD ...........................
ページ3に含まれる内容の要旨
Overviewoffunctions Functioningofthedevice Your Philips DVD/HDD recorder mainly consists of the following components: HDDrecorder ForrecordinginatemporarystorageontheHDD(TimeshiftBuffer) As soon as you turn on the DVD/HDD recorder, it automatically records the current TV channel selected on the DVD/HDD recorder in this temporary storage. As a result, you can 'rewind' to a scene (D ) or watch a still picture ( PAUSE9 ), while the current TV show is still being recorded. Recordings in the time shi
ページ4に含まれる内容の要旨
Overviewoffunctions Theremotecontrol REC/OTRn Record the current TV show on the HDD, mark recordings in the time shift buffer to be stored on HDD. Hold button down to start the recording from now. (Mark the recording from the beginning of the actual position in the Time Shift Buffer). STANDBYm To switch set on or off, interrupt menu function. A programmed recording (TIMER) or an archiving process will be continued until the end, and the device will then be switched off. CAM Switch to 'Camera mod
ページ5に含まれる内容の要旨
Overviewoffunctions BROWSER HDD Call up/cancel the overview of HDD recordings (media browser). ® GUIDE/TV Call up/Cancel the GUIDE Plus+ System AB Cursor buttons up, down in the menus. Previous or next position in the time shift buffer during playback from HDD. DC Cursor buttons left, right in the menus. Previous or next position during playback of a title from the HDD (media browser or time shift buffer). If you hold down this button you can faster brwose trough the recordings. The speed will i
ページ6に含まれる内容の要旨
Overviewoffunctions AdditionalTVfunctions With the enclosed multicode remote control you can control the main functions of your TV set. To do this, you must first enter a code number that corresponds to the make of your TV set. You will find a summary of all available remote control commands on the last page of this manual. How to enter this code number you will read in the chapter ' Using your DVD-Recorder remote control with your TV set'. TV VOLUMEq Increase TV volume TV VOLUMEr Reduce TV volu
ページ7に含まれる内容の要旨
Overviewoffunctions G : Play back a recorded disc or a title on the HDD Frontofthedevice N : : select previous title/search backwards STANDBY-ONm : To switch device off / on, interrupt a function. O : : select next title/search forwards TRAY LED : Red light around the disc tray indicates recording on a h : Interrupt playback/recording (Cameramode) DVD+RW/+R. OPEN/CLOSEJ : Open/close disc tray. Behindtheflapattheright handcorneronthefront ® Switching between the sockets VIDEO (CAM1) , S-VIDEO GUI
ページ8に含まれる内容の要旨
Overviewoffunctions Backofthedevice 4MAINS Connection to the mains supply (230V/50Hz) ANTENNA IN Connection of the aerial TV OUT Connection of the aerial cable to the TV set EXT2 AUX-I/O Connection of an additional device (satellite receiver, set-top box, video recorder, camcorder, ...). Input for RGB, S-video signals, input/output for CVBS (video) signals EXT1 TO TV-I/O Connection of a TV set. Input for RGB, S-video signals, input/output for CVBS (video) signals Outputsockets(AUDIO/VIDEOOUT) S-
