Havis-Shields Van Permanent Rear Step KK-S-ST-RPの取扱説明書

ページ1に含まれる内容の要旨

INSTALL INSTRUCTIONS KK-S-ST-RP
PERMANENT REAR STEP
2002-2008 SPRINTER VAN

TOOLS REQUIRED:
Ratcheting wrench Power drill
Standard socket set Drill bit set
Open-end wrench set


HARDWARE:
QTY DESCRIPTION PART #
8 ½-13 x 1 ½” Hex head bolt GSM33050
12 ½-13 x 4” Hex head bolt GSM33056
40 ½” Flat washer GSM31009
8 ½” Lock washer GSM31030
8 ½-13 Hex nut GSM30011
12 ½-13 Nylock nut GSM30020
4 ¼” x ¾” Lag bolt GSM33060-1

SUB ASSEMBLY:
1. Confirm receipt of all parts.
2. Dif

ページ2に含まれる内容の要旨

INSTALLATION: 1. MOUNT PERMANENT REAR STEP: • Locate (4) ½” holes located on each side of the vehicle frame rails. • Bolt the Upper mounting brackets (2 per-side) using the ½” holes and (8) ½-13 x 4” Hex bolts, washers, and Nylock nuts. If also mounting Kwik Kit, be sure to mount to doorframe brackets at this time. See photo below. Note: Depending on single rear wheel standard length van, dual rear wheels standard length van, and dual rear wheels extended length van will effect w