ページ1に含まれる内容の要旨
QD-52
User’s Manual
www.microboards.com Version 4.4
ページ2に含まれる内容の要旨
2
ページ3に含まれる内容の要旨
Table of Contents Introduction...................................................................................................................................... 5 Unpacking your system ................................................................................................................... 5 Installation........................................................................................................................................ 5 Basic Instructions................
ページ4に含まれる内容の要旨
4
ページ5に含まれる内容の要旨
Introduction The QD-52 is a high speed, low cost one to one CD Recordable duplication system from Microboards Technology, LLC. The QD-52 is perfect for any user requiring easy copying of audio, video, or Data CDs. Superior technology allows the QD-52 to ship without a hard drive. LED indicators provide the user with status of the duplication process, minimizing the number of faulty discs. Current high speed CD Recordable technology is supported at 52X, which is the highest in the indu
ページ6に含まれる内容の要旨
Basic Instructions Buttons and LCD There are four buttons and an LCD on the front panel of the QD-52 duplicator. LED display: Shows the menu items and any status messages that may come up during operation. ENT button: The ENT button, used to start a duplication process or enter into an area in the menu structure. ESC button: The ESC button, used to stop an operation or move up the menu structure. ▲ button, used to scroll up in the different menus. ▼ button, used to s
ページ7に含まれる内容の要旨
The QD-52 system consists of a CD reader, CD Writer and Controller module. The master discs always go into the TOP CD Reader drive. The blank CD media will always go into the BOTTOM CD Recorder drive. The power switch and power LED are also located on the front of the QD-52 duplicator. The LCD display will show the different menu selections and also information pertaining to the recording process. Here is a typical example of what is displayed during the COPY process: Displa
ページ8に含まれる内容の要旨
Main Menu ENT Load Next Source Disc Copying – 52x 17% 1.0 Copy 1.0 Copy ENT Blank Disc Analyzing…. 150.4MB 01:15 OK: 01 ESC ▼ Load Next ENT ENT Source Disc Testing – 52x 17% 2.0 Test Blank Disc 2.0 Test Analyzing…. 150.4MB 01:15 OK: 01 ESC ▼ Load Next ENT ENT Blank Disc Source Disc Copying – 52x 17% 3.0 Copy 3.0 Test & Copy Analyzing…. 150.4MB 01:15 OK: 01 ESC ▼ ENT Copied disc is now 4.0 Verify 4.0 Verify Preparing…... being read. OK: 01 ESC ▼
ページ9に含まれる内容の要旨
Functions There are 9 different functions for the QD-52 duplicator: Copy, Test, Test & Copy, Verify, Compare, Prescan, Disc Info, Edit Track and Setup. For the Setup options, please refer to page 15. Copy (NOTE: For CD+G duplication, please see pages 18-20) The Copy function is used to copy our master disc to the blank media, CD-R or CD-RW. The QD-52 duplicator will be in Copy mode when it is turned on. The display will read: 1. Copy Place your master disc into the TOP CD reader
ページ10に含まれる内容の要旨
When this operation completes, the unit will start the Copy Copying – 52x 18% process: 150.4MB 01:15 When the job is completed, the recorded disc will be ejected from the BOTTOM drive. The display will read: 3.0 Copy OK: 01 Verify The Verify function will check to see if the recorded disc can be read. This is different from the Compare function. The Verify function will not compare itself with the master disc. It is only checking to see if the dis
ページ11に含まれる内容の要旨
Place the master disc into the TOP reader drive and press ENT. The prescan starts and the following screen appears: Scaning – 24x 15% 620.4MB 02:15 PreScan OK! Once the scanning is complete, the following screen will appear: Disc Info The Disc Info function displays information on the type of master disc placed in the TOP reader drive. To use the Disc Info function, press the ▼▲ buttons until the display 7. Disc Info reads: Place the master disc into the T
ページ12に含まれる内容の要旨
This screen shows the total number of tracks selected from the master disc and the total time of those tracks. 6. Press the ENT button. The following screen appears: End Edit Disc And burn? YES Note: Pressing the ▼ button and selecting NO takes you back to Editing tracks. 7. Press the ENT button to begin recording the selected tracks to Copying – 52x Edit the blank disc. The following screen appears: 1/16 → 1/1 8. Once the tracks are copied to the blank disc, the
ページ13に含まれる内容の要旨
Press the ▼ button until the display reads: 8-02. Edit Track Play Audio Track Press the ENT button. Select Track: The following screen appears: 1/16 04:53 To play a track, press the ENT button. To scroll to the different tracks, press the ▼▲ buttons. To get back to the main menu, press the ESC button. Close Session The Close Session function is used only if you did not close an audio CD, as described in the Edit Track / CD to CD Edit section. You can use th
ページ14に含まれる内容の要旨
Setup ENT ENT ▲ 9-01. Setup Language Idioma 9.Setup Language English Spanish ▼ ▼ NOTE: 12X is currently the minimum Burn Speed ESC ENT ▲ 9-02. Setup Burn Speed burn speed. If a slower speed is Available speeds: 52x, 48x, 40x, Burn Speed Maximum selected, burn will be at 12X. ▼ 32x, 24x, 16x, 12x, 10x, 8x, 4x ▼ Read Speed ENT ▲ 9-03. Setup Read Speed Available speeds: 52x, Read Speed Maximum 48x, 40x, 32x, 16x, 8x ▼ ▼ ESC ENT ▲ 9-04. Setup Auto Start Drive Options are Off, Note: Option
ページ15に含まれる内容の要旨
The Setup menu includes many setting the user can select to customize the use of the QD-52 duplicator. Here is a description of the options in the setup menu. Please refer to the chart on page 15 for the location and options of these settings. Language The QD-52 duplicator has two language options, English and Spanish. English is the default setting. CD Burn Speed The default record speed for the QD-52 is Maximum (52x). The other record speed options are: 48x, 40x, 32x, 24x, 16x, 1
ページ16に含まれる内容の要旨
Eject Disc There are 3 options for the Eject Disc setting: 1. Eject good discs only 2. Eject all discs 3. Do not eject discs The default setting is to eject the good discs only. Burn Mode There are 3 options for the Burn Mode setting: 1. DAO (Disc At Once) 2. TAO – Not Close (Track At Once, not closed) 3. TAO (Track At Once, closed) The default setting is DAO. It is recommended that this setting be used. Display Time The display time function is used to display the
ページ17に含まれる内容の要旨
Adv Setup ▲ ENT ENT 10- 01 A dv Setup Under Run Protect Options are ON or 10. A dvanced Setup Under Run Protect ON Off ▼ ▼ ▲ ESC ENT 10- 02 A dv Setup Overburn Options are ON or Overburn Off Off ▼ ▼ ▲ ESC ENT 10- 03 A dv Setup Read Error Skip Options are ON or Read Error Skip OFF Off ▼ ▼ ESC ENT 10- 04 A dv Setup Burn- In Burn- In Used by Service Burn- In Erase & Copy Test Personnel Only ▼ ▼ ESC ENT
ページ18に含まれる内容の要旨
Advanced Setup Menu To get to the Advanced Setup Menu, press and hold the ESC button for three seconds. The Advanced Setup menu includes options for the more advanced user. Normally these functions are not used in the daily operation of the QD-52 duplicator. If you have any questions about using these functions, please contact the Microboards technical support department. UnderRun Protect The UnderRun Protect feature allows the recorder to use Burn Proof during recording. This setting
ページ19に含まれる内容の要旨
Specifications • Product Name Quic Disc QD-52 • Product Interface ATAPI/ IDE • Read Speed 52X • Write Speed 52X • Supported Formats CD-ROM Mode 1 & 2 CD-DA , CD-ROM/XA Video CD , Game CD Mix Mode , Multisession , HFS CD Bridge , Photo CD , CD Extra, CD+G (Karaoke) • System Display LED • Write Method Auto Detect (DAO, TAO ) • Operation Mode COPY, TEST, SCAN, SAFE • Data Buffer 1 MB • Firmware Upgrade Via CD-ROM • Dimension 6.8 x 7.5 x 11.25 (H x W x D) Inches • Weight 4.
ページ20に含まれる内容の要旨
Appendix 1 List of Functions 1 Copy 2 Test 3 Test & Copy 4 Verify 5 Compare 6 Prescan 7 Disc Info 8 Edit Track (for CD only) 8-1 CD to CD Edit 8-3 Play Audio Track 8-4 Close Session 9 Setup 9-1 Language (Default is English) 9-2 CD Burn Speed (Default is Maximum) 9-3 CD Read Speed (Default is Maximum) 9-4 Auto Start Drive (Default is Off) 9-5 Startup Menu (Default is Copy) 9-6 Auto Verify (Default is Off) 9-7 Auto Compare (Default is Off) 9-8 Auto Prescan (Default is Off) 9-9
